KINGBRIGHT L-816BSRC-B User Manual

10mm ROUND, BLINKING LED LAMP

PRELIMINARY SPEC

Features

●10mm DIAMETER BIG LAMP WITH BUILT-IN
BLINKING IC.

●OPERATION VOLTAGE FROM 3.5V to 14V.

●BLINKING FREQUENCY FROM 3.0Hz to 1.5Hz.

z RoHS COMPLIANT.

Package Dimensions

Part Number: L-816BSRC-B SUPER BRIGHT RED

Description

The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAE0974 REV NO: V.5 DATE: APR/17/2007 PAGE: 1 OF 3
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU

Selection Guide

V

Iv (mcd)

Part No.

Dice Lens Type

V=9V

Min. Typ.

L-816BSRC-B SUPER BRIGHT RED (GaAIAs) WATER CLEAR 110 400

Note:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Min. Typ.

λpeak

λD

Δλ1/2

Peak Wavelength Super Bright Red 660 nm

Dominant Wavelength Super Bright Red 640 nm

Spectral Line Half-width Super Bright Red 20 nm

Max.

IF Forward Current Super Bright Red 8 22 mA

ISON Supply Current Super Bright Red 8 mA VF = 3.5V
ISON Supply Current Super Bright Red 44 mA VF = 14V

f Blink Frequency Super Bright Red 1.5 3 Hz VF = 3.5V ~ 14V

Units Test Conditions

iewing

Angle

2θ1/2

15°

Min:VF=3.5V

F=5V

Typ:V

Absolute Maximum Ratings at T

A=25°C

Parameter Super Bright Red Units

Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds

Notes:

1. 2mm below package base.

2. 5mm below package base.

SPEC NO: DSAE0974 REV NO: V.5 DATE: APR/17/2007 PAGE: 2 OF 3
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU