8mm BLINKING LED LAMP
Part Number: L-796BYD YELLOW
Features
z8mm DIAMETER BIG LAMP WITH BUILT-IN
BLINKING IC.
zOPERATION VOLTAGE FROM 3.5V to 14V.
zBLINKING FREQUENCY FROM 3.0Hz to 1.5Hz.
zRoHS COMPLIANT.
Package Dimensions
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD3604 REV NO: V.3 DATE: MAR/13/2007 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU
Selection Guide
V
Iv (mcd) [2]
Part No.
Dice Lens Type
V=9V
Min. Typ.
L-796BYD YELLOW (GaAsP/GaP) YELLOW DIFFUSED
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity / luminous flux: +/-15%.
Electrical / Optical Characteristics at T
A=25°C
Symbol Parameter Device Min. Typ. Units Test Conditions
λpeak
λD [1]
Δλ1/2
Peak Wavelength Yellow 590 nm
Dominant Wavelength Yellow 588 nm
Spectral Line Half-width Yellow 35 nm
IF Forward Current Yellow 8 22 mA
ISON Supply Current Yellow 8 mA VF = 3.5V
7 30
Max.
iewing
Angle [1]
2 θ 1/2
Min:VF=3.5V
F=5V
Typ:V
60°
ISON Supply Current Yellow 44 mA VF = 14V
f Blink Frequency Yellow 1.5 Hz VF = 3.5V~14V
Notes:
1.Wavelength: +/-1nm.
Absolute Maximum Ratings at T
A=25°C
3
Parameter Yellow Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAD3604 REV NO: V.3 DATE: MAR/13/2007 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU
Loading...