KINGBRIGHT L-53SRD-5V User Manual
T-1 3/4 (5mm) SOLID STATE LAMP
P/N: L-53SRD-5V SUPER BRIGHT RED
Features
LOW POWER CONSUMPTION.
POPULAR T-1 3/4 DIAMETER PACKAGE.
GENERAL PURPOSE LEADS.
RELIABLE AND RUGGED.
LONG LIFE - SOLID STATE RELIABILITY.
AVAILABLE ON TAPE AND REEL.
5V INTERNAL RESISTOR.
RoHS COMPLIANT.
Package Dimensions
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD0630 REV NO: V.2 DATE: APR/14/2006 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Selection Guide
Viewing
Iv (mcd) [2]
Part No. Dice Lens Type
L-53SRD-5V SUPER BRIGHT RED (GaAlAs) RED DIFFUSED 110 180
Notes:
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
1. θ
2. Luminous Intensity / Luminous Flux: +/-15%.
@ V=5V
Min. Typ.
Angle [1]
2θθθθ1/2
60°
Electrical / Optical Characteristics at T
A=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
λD [1]
∆λ1/2
Peak Wavelength Super Bright Red 660 nm VF=5V
Dominant Wavelength Super Bright Red 640 nm VF=5V
Spectral Line Half-width Super Bright Red 20 nm VF=5V
IF Forward Current Super Bright Red 13 17.5 mA VF=5V
IR Reverse Current Super Bright Red 10 uA VR= 5V
Note:
1. Wavelength: +/-1nm.
Absolute Maximum Ratings at T
A=25°C
Parameter Super Bright Red Units
Power dissipation 85 mW
DC Forward Current 6 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAD0630 REV NO: V.2 DATE: APR/14/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Loading...