KINGBRIGHT L-53SGD-5V User Manual
T-1 3/4 (5mm) SOLID STATE LAMP
P/N: L-53SGD-5V SUPER BRIGHT GREEN
Features
LOW POWER CONSUMPTION.
POPULAR T-1 3/4 DIAMETER PACKAGE.
GENERAL PURPOSE LEADS.
RELIABLE AND RUGGED.
LONG LIFE - SOLID STATE RELIABILITY.
AVAILABLE ON TAPE AND REEL.
5V INTERNAL RESISTOR.
RoHS COMPLIANT.
Package Dimensions
Description
The Super Bright Green source color devices are made
with Gallium Phosphide Green Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD0638 REV NO: V.2 DATE: APR/14/2006 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Selection Guide
Viewing
Iv (mcd) [2]
Part No. Dice Lens Type
V=5V
Angle [1]
Min. Typ.
L-53SGD-5V SUPER BRIGHT GREEN (GaP) GREEN DIFFUSED 8 20
Notes:
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
1. θ
2. Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
Peak Wavelength Super Bright Green 565 nm VF=5V
2θθθθ1/2
60°
λD [1]
∆λ1/2
Dominant Wavelength Super Bright Green 568 nm VF=5V
Spectral Line Half-width Super Bright Green 30 nm VF=5V
IF Forward Current Super Bright Green 11.5 17.5 mA VF=5V
IR Reverse Current Super Bright Green 10 uA VR = 5V
Note:
1. Wavelength: +/-1nm.
Absolute Maximum Ratings at T
A=25°C
Parameter Super Bright Green Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAD0638 REV NO: V.2 DATE: APR/14/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Loading...