KINGBRIGHT L-53LSRD User Manual

T-1 3/4 (5mm) SOLID STATE LAMP

P/N: L-53LSRD SUPER BRIGHT RED

Features



LOW POWER CONSUMPTION.



POPULAR T-1 3/4 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



LOW CURRENT IF=2mA OPERATING.



RoHS COMPLIANT.

Package Dimensions

Description

The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAA4428 REV NO: V.6 DATE: APR/14/2006 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

Selection Guide

Viewing

Iv (mcd) [2]

Part No. Dice Lens Type

L-53LSRD SUPER BRIGHT RED (GaAIAS) RED DIFFUSED 8 20

Notes:

θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

1.

2. Luminous intensity/ luminous Flux: +/-15%.

@ 2mA

Min. Typ. 2θθθθ1/2

Angle [1]

60°

Electrical / Optical Characteristics at T

A=25°C

Symbol Parameter Device Typ. Max. Test ConditionsUnits

λpeak
λD [1]

∆λ1/2

Peak Wavelength Super Bright Red 660 nm IF=20mA

Dominant Wavelength Super Bright Red 640 nm IF=20mA

Spectral Line Half-width Super Bright Red 20 nm IF=20mA

C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz

VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA

IR Reverse Current Super Bright Red 10 uA VR = 5V

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

Absolute Maximum Ratings at T

A=25°C

Parameter Super Bright Red Units

Power dissipation 100 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 2mm below package base.

3. 5mm below package base.

SPEC NO: DSAA4428 REV NO: V.6 DATE: APR/14/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI