Features
LOW POWER CONSUMPTION.
POPULAR T-1 3/4 DIAMETER PACKAGE.
GENERAL PURPOSE LEADS.
RELIABLE AND RUGGED.
LONG LIFE - SOLID STATE RELIABILITY.
AVAILABLE ON TAPE AND REEL.
5V UBTERBAL RESISTOR.
RoHS COMPLIANT.
T-1 3/4 (5mm) SOLID STATE LAMP
P/N: L-53ID-5V HIGH EFFICIENCY RED
Description
The High Efficiency Red source color devices are
made with Gallium Arsenide Phosphide on Gallium
Phosphide Orange Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD0628 REV NO: V.3 DATE: APR/07/2006 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHNAG
Selection Guide
Iv (mcd) [2]
Part No. Dice Lens Type
L-53ID-5V HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 12 30
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/
-15%.
V=5V
Min. Typ. 2 θ
Angle [1]
θ 1/2
θ θ
60°
Electrical / Optical Characteristics at T
A=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
λD [1]
∆λ1/2
Peak Wavelength High Efficiency Red 627 nm VF=5V
Dominant Wavelength High Efficiency Red 625 nm VF=5V
Spectral Line Half-width High Efficiency Red 45 nm VF=5V
IF Forward Current High Efficiency Red 13 17.5 mA VF=5V
IR Reverse Current High Efficiency Red 10 uA VR= 5V
Note:
1. Wavelength: +/-1nm.
Absolute Maximum Ratings at T
A=25°C
Parameter High Efficiency Red Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature
-40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature[1] 260°C For 3 Seconds
Lead Solder Temperature[2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAD0628 REV NO: V.3 DATE: APR/07/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHNAG