T-1 3/4 (5mm) SOLID STATE LAMP
P/N: L-53GD-5V GREEN
Features
LOW POWER CONSUMPTION.
POPULAR T-1 3/4 DIAMETER PACKAGE.
GENERAL PURPOSE LEADS.
RELIABLE AND RUGGED.
LONG LIFE - SOLID STATE RELIABILITY.
AVAILABLE ON TAPE AND REEL.
5V INTERNAL RESISTOR.
RoHS COMPLIANT.
Package Dimensions
Description
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAA9088 REV NO: V.5 DATE: APR/14/2006 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI
Selection Guide
Viewing
Iv (mcd) [2]
Part No. Dice Lens Type
L-53GD-5V GREEN (GaP) GREEN DIFFUSED 8 20
Notes:
θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
1.
2. Luminous intensity / luminous flux: +/-15%.
V=5V
Min. Typ. 2 θ
Angle [1]
θ 1/2
θ θ
60°
Electrical / Optical Characteristics at T
A=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
λD[1]
∆λ1/2
I
F
I
R
Note:
1.Wavelength: +/-1nm.
Absolute Maximum Ratings at T
Peak Wavelength Green 565 nm VF=5V
Dominant Wavelength Green 568 nm VF=5V
Spectral Line Half-width Green 30 nm VF=5V
Forward Current Green 11.5 17.5 mA VF=5V
Reverse Current Green 10 uA VR= 5V
A=25°C
Parameter Green Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature
-40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature[1] 260°C For 3 Seconds
Lead Solder Temperature[2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAA9088 REV NO: V.5 DATE: APR/14/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI
Loading...