KINGBRIGHT L-53GD-12V User Manual

T-1 3/4 (5mm) SOLID STATE LAMP

P/N: L-53GD-12V GREEN

Features



LOW POWER CONSUMPTION.



POPULAR T-1 3/4 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



12V INTERNAL RESISTOR.



RoHS COMPLIANT.

Package Dimensions

Description

The Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAD0636 REV NO: V.2 DATE: APR/14/2006 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

Selection Guide

Viewing

Iv (mcd) [2]

Part No. Dice Lens Type

L-53GD-12V GREEN (GaP) GREEN DIFFUSED 8 20

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

2. Luminous Intensity / Luminous Flux: +/

-15%.

V= 12V

Min. Typ.

Angle [1]

2 θ

θ 1/2

θ θ

60°

Electrical / Optical Characteristics at T

A=25°C

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak
λD [1]

∆λ1/2

Peak Wavelength Green 565 nm VF=12V

Dominant Wavelength Green 568 nm VF=12V

Spectral Line Half-width Green 30 nm VF=12V
IF Forward Current Green 8.5 11.5 mA VF=12V
IR Reverse Current Green 10 uA VR = 5V

Note:

1. Wavelength: +/-1nm.

Absolute Maximum Ratings at T

A=25°C

Parameter Green Units

Power dissipation 120 mW
Forward Voltage 14 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature[1] 260°C For 3 Seconds
Lead Solder Temperature[2] 260°C For 5 Seconds

Notes:

1. 2mm below package base.

2. 5mm below package base.

SPEC NO: DSAD0636 REV NO: V.2 DATE: APR/14/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI