KINGBRIGHT L-2060GD User Manual

1.8mm SOLID STATE LAMP

L-2060GD GREEN

Features



1.8mm DIAMETER SMALL SIZE LED LAMP.



ULTRA BRIGHTNESS IS AVAILABLE.



RELIABLE AND RUGGED.



VERSATILE MOUNTING ON P.C. BOARD OR PANEL.



AVAILABLE IN DIFFUSED LENS.



RoHS COMPLIANT.

Package Dimensions

Description

The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAA5505 REV NO: V.6 DATE: MAR/21/2005 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

Selection Guide

Viewing

Part No. Dice Lens Type

Min. Typ. 2θθθθ1/2

L-2060GD GREEN (GaP) GREEN DIFFUSED

Note:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

5 10

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Typ. Max. Test ConditionsUnits

λpeak

Peak Wavelength Green 565 nm IF=20mA

Iv (mcd)
@ 10mA

Angle

70°

λD

∆λ1/2

Dominant Wavelength Green 568 nm IF=20mA

Spectral Line Half-width Green 30 nm IF=20mA

C Capacitance Green 15 pF VF=0V;f=1MHz

VF Forward Voltage Green 2.2 2.5 V IF=20mA

IR Reverse Current Green 10 uA VR = 5V

Absolute Maximum Ratings at TA=25°C

Parameter Green Units

Power dissipation 105 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. 2mm below package base.

3. 5mm below package base.

SPEC NO: DSAA5505 REV NO: V.6 DATE: MAR/21/2005 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI