3.2X1.6mm SMD CHIP LED LAMP
Part Number: KPC-3216YD YELLOW
Features
3.2X1.6mm SMT LED, 1.1mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPESAVAILABLE.
PACKAGE: 2000PCS / REEL.
MOISTURE SENSITIVITY LEVEL: LEVEL3.
RoHS COMPLIANT.
Package Dimensions
Description
The Yellow source color devices aremadewith Gallium
Arsenide Phosphide on Gallium PhosphideYellow Light
Emitting Diode.
Notes:
1.All dimensions are in millimeters (inches).
2.Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject tochange without notice.
4.The device has a single mounting surface. The device must be mounted according tothe specifications.
SPEC NO: DSAC8324 REV NO: V.3 DATE: MAY/21/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU
Selection Guide
Viewing
Part No.
Dice Lens Type
Iv (mcd) [2]
@ 20mA
Angle [1]
Min. Typ. 2θ1/2
KPC-3216YD YELLOW (GaAsP/GaP) YELLOW DIFFUSED 2.6 8
Notes:
. θ1/2 isthe angle from optical centerline where the luminous intensity is 1/2the optical centerline value.
1
2. Luminous Intensity /Luminous Flux: +/-15%.
Electrical / Optical Characteristics at T
A=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak
λD [1]
∆λ1/2
Peak Wavelength Yellow 590 nm IF=20mA
Dominant Wavelength Yellow 588 nm IF=20mA
Spectral Line Half-width Yellow 35 nm IF=20mA
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA
IR ReverseCurrent Yellow 10 uA VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
120°
Absolute Maximum Ratings at T
A=25°C
Parameter Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating/StorageTemperature -40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAC8324 REV NO: V.3 DATE: MAY/21/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU
Loading...