SOT-23 SURFACE MOUNT LED LAMP
P/N: KM-23YD YELLOW
Features
SOT-23 PACKAGE SURFACE MOUNT LED LAMP.
LOW POWER CONSUMPTION.
LONG LIFE - SOLID STATE RELIABILITY.
PACKAGE: 2000PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
RoHS COMPLIANT.
Package Dimensions
Description
The Yellow source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide
Yellow Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB4314 REV NO: V.5 DATE: MAR/04/2006 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI
Selection Guide
Viewing
Iv (mcd) [2]
Part No. Dice Lens Type
KM-23YD YELLOW (GaAsP/GaP) YELLOW DIFFUSED
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity/ Luminous Flux: +/-15%
@ 20mA
Min. Typ.
1.6 5 140°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak
Peak Wavelength Yellow 590 nm IF=20mA
Angle [1]
2 θ
θ 1/2
θ θ
λD[1]
∆λ1/2
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VF[2] Forward Voltage Yellow 2.1 2.5 V IF=20mA
IR Reverse Current Yellow 10 uA VR = 5V
Notes:
1.Wavelength: +/-1nm
2.Forward Voltage: +/-0.1V
Absolute Maximum Ratings at T
Parameter Yellow Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Dominant Wavelength Yellow 588 nm IF=20mA
Spectral Line Half-width Yellow 35 nm IF=20mA
A=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB4314 REV NO: V.5 DATE: MAR/04/2006 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI
Loading...