Page 1
T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: L-7113SURDK Hyper Red
Features
z Low power consumption.
z Popular T-1 3/4 diameter package.
z General purpose leads.
z Reliable and rugged.
z Long life - solid state reliability.
z Available on tape and reel.
z RoHS compliant.
Package Dimensions
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Kingbright
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD3993 REV NO: V.14A DATE: MAR/30/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005324
Page 2
Selection Guide
V
Part No. Dice Lens Type
L-7113SURDK
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Hyper Red (AlGaInP) Red Diffused
Iv (mcd) [2]
@ 20mA
Min. Typ. 2θ1/2
700 1300
*300 *650
iewing
Angle [1]
30
°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 645 nm I
λD [1] Dominant Wavelength Hyper Red 630 nm I
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm I
C Capacitance Hyper Red 35 pF V
V
F [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
R Reverse Current Hyper Red 10 uA VR = 5V
I
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
F=20mA
F=20mA
F=20mA
F=0V;f=1MHz
Kingbright
Absolute Maximum Ratings at TA=25°C
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAD3993 REV NO: V.14A DATE: MAR/30/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005324
Page 3
Hyper Red L-7113SURDK
Kingbright
SPEC NO: DSAD3993 REV NO: V.14A DATE: MAR/30/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005324
Page 4
PACKING & LABEL SPECIFICATIONS L-7113SURDK
Kingbright
SPEC NO: DSAD3993 REV NO: V.14A DATE: MAR/30/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005324
Page 5
Kingbright
SPEC NO: DSAD3993 REV NO: V.14A DATE: MAR/30/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005324
Page 6
Kingbright
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
SPEC NO: DSAD3993 REV NO: V.14A DATE: MAR/30/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005324
Loading...