Page 1
3.2x1.6mm SMD CHIP LED LAMP
Part Number: KP-3216MGC Mega Green
Features
z 3.2mmx1.6mm SMT LED, 1.1mm thickness.
z Low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Various colors and lens types available.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Description
The Mega Green source color devices are made with AlGaInP
on GaAs substrate Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.0079") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1203000359
Page 2
Selection Guide
V
Iv (mcd) [2]
Part No. Dice Lens Type
@ 20mA
Min. Typ. 2θ1/2
KP-3216MGC Mega Green (AlGaInP) WATER CLEAR 36 70
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
iewing
Angle [1]
120
°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Mega Green 574 nm I
λD [1] Dominant Wavelength Mega Green 570 nm I
Δλ1/2 Spectral Line Half-width Mega Green 26 nm I
C Capacitance Mega Green 20 pF V
V
F [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA
R Reverse Current Mega Green 10 uA VR=5V
I
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
F=20mA
F=20mA
F=20mA
F=0V;f=1MHz
Absolute Maximum Ratings at TA=25°C
Parameter Mega Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1203000359
Page 3
Mega Green KP-3216MGC
SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1203000359
Page 4
KP-3216MGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
Reel Dimension
SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1203000359
Page 5
PACKING & LABEL SPECIFICATIONS KP-3216MGC
SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1203000359
Loading...