Page 1
2.0x1.25mm SMD CHIP LED LAMP
Part Number: KP-2012SGC Super Bright Green
Features
z 2.0mmx1.25mm SMT LED,1.1mm thickness.
z Low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Various colors and lens types available.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Description
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB1341 REV NO: V.15 DATE: SEP/07/2010 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000170
Page 2
Selection Guide
V
Iv (mcd) [2]
Part No. Dice Lens Type
@ 20mA
Min. Typ. 2θ1/2
KP-2012SGC Super Bright Green (GaP) Water Clear 8 15
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
iewing
Angle [1]
120
°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Green 565 nm I
λD [1] Dominant Wavelength Super Bright Green 568 nm I
Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm I
C Capacitance Super Bright Green 15 pF V
V
F [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA
R Reverse Current Super Bright Green 10 uA VR=5V
I
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
F=20mA
F=20mA
F=20mA
F=0V;f=1MHz
Absolute Maximum Ratings at TA=25°C
Parameter Super Bright Green Units
Power dissipation 62.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB1341 REV NO: V.15 DATE: SEP/07/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000170
Page 3
Super Bright Green KP-2012SGC
SPEC NO: DSAB1341 REV NO: V.15 DATE: SEP/07/2010 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000170
Page 4
KP-2012SGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
Reel Dimension
SPEC NO: DSAB1341 REV NO: V.15 DATE: SEP/07/2010 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000170
Page 5
PACKING & LABEL SPECIFICATIONS KP-2012SGC
SPEC NO: DSAB1341 REV NO: V.15 DATE: SEP/07/2010 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000170
Loading...