KINGBRIGHT KAAF-5060PBESEEVGC User Manual
5.0mm x 6.0mm SURFACE MOUNT LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
lCHIPS CAN BE CONTROLLED SEPARATELY.
lSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
PROCESS.
lAVAILABLE ON TAPE AND REEL.
lPACKAGE: 500PCS / REEL.
KAAF-5060PBESEEVGC
BLUE / HYPER ORANGE /GREEN
Description
The Blue source color devices are made with InGaN on
SiC Light Emitting Diode.
The Hyper Orange source color devices are made with
DH InGaAlP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAB9241 REV NO: V.6 DATE: MAY/11/2003 PAGE: 1 OF 6
APPROVED : J. Lu CHECKED : Allen Liu DRAWN: F.Y.YUAN
Selection Guide
.oNtraP.oNt raP
.oNtraP
.oNtraP.oNt raP
eciDeciD
eciD
eciDeciDepyTsneLepyTsneL
epyTsneL
epyTsneLepyTsneL
)dcm(vI)dcm (vI
)dcm(vI
)dcm(vI)dcm (vI
Am05*Am03@
gniweiVgniweiV
gniweiV
gniweiVgniweiV
elgnA
.niM.niM
.niM
.niM.niM.pyT . pyT
.pyT
.pyT.pyT
2/1θ22/1θ2
2/1θ2
2/1θ22/1θ2
CGVEESEBP0605-FAAK
)NaGnI(EULB
RAELCRETAW
011052
°001)PIAaGnI(EGNAROREPYH056* 0001*
)NaGnI(NEERG081053
lobmySlobmyS
lobmyS
lobmySlobmyS
retemaraPretemaraP
retemaraP
retemaraPretemaraPeciveDeciveD
eciveD
eciveDeciveD.pyT . pyT
.pyT
.pyT.pyT.xaM . x aM
.xaM
.xaM.xaMstinU st inU
stinU
stinUstinUsnoi tidnoCtseTsnoi tidnoCtseT
snoitidnoCtseT
snoitidnoCtseTsnoi tidnoCtseT
λ kaep
htgnelevaWkaeP
eulB
egnarOrepyH
neerG
564
036
025
mnI
F
Am02=
λD
htgnelevaWetanimoD
eulB
egnarOrepyH
neerG
074
126
525
mnI
F
Am02=
λ∆ 2/1
htdiw-flaHeniLlartcepS
eulB
egnarOrepyH
neerG
52
02
83
mnI
F
Am02=
Cecna ticapaC
eulB
egnarOrepyH
neerG
011
52
54
FpV
F
zHM1=f;V0=
V
F
egatloVdrawroF
eulB
egnarOrepyH
neerG
7.3
0.2
0.4
3.4
5.2
5.4
VI
F
Am02=
I
R
tnerruCesreveRllA01AuV
R
V5=
retemaraPretemaraP
retemaraP
retemaraPretemaraP
eulBeulB
eulB
eulBeulBegna rOrepyHegnarOrepyH
egnarOrepyH
egnarOrepyHegna rOrepyHneerGneerG
neerG
neerGneerGstinU st inU
stinU
stinUstinU
]1[tnoitapissidrewoPlatoT053Wm
tnerruCdrawroFCD 03 05 03 Am
]2[tnerruCdrawroFkaeP061591051Am
egatloVesreveR 555V
erutarepmeTegarotS/gnitarepO04-
°
58+oTC
°
C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. * Luminous intensity with asterisk is measured at 50mA.
Electrical / Optical Characteristics at TA=25
Absolute Maximum Ratings at TA=25
°°
°C
°°
°°
°C
°°
SPEC NO: DSAB9241 REV NO: V.6 DATE: MAY/11/2003 PAGE: 2 OF 6
APPROVED : J. Lu CHECKED : Allen Liu DRAWN: F.Y.YUAN
Notes:
1.Within 350mW at all chips are lightened.
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Loading...