KINGBRIGHT DLC26GD User Manual

20mm BIG LAMP

Part Number: DLC2/6GD GREEN

Features

z2 PINS.
zHIGH LUMINOUS INTENSITY.
zLOW POWER CONSUMPTION.
zWIDE VIEWING ANGLE.
zCATEGORIZED FOR LUMINOUS INTENSITY.
zEXCELLENT ON/OFF CONTRAST.
zEASY MOUNTING ON P.C. BOARD OR SOCKETS.
zSOLID STATE RELIABILITY.
zRoHS COMPLIANT.

Package Dimensions & Internal Circuit Diagram

Description

The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the lead emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAB6878 REV NO: V.8 DATE: MAY/04/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1338000069

Selection Guide

V

Iv (mcd) [2]

Part No.

DLC2/6GD GREEN (GaP) GREEN DIFFUSED

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

2.Luminous Intensity / Luminous Flux: +/-15%.

Dice Lens Type

@ 10mA

Min. Typ.

18 53.3

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Typ. Max. Test Conditions Units

λpeak
λD [1]

Δλ1/2

C Capacitance Green 15 pF VF=0V;f=1MHz

VF [2] Forward Voltage Green 6.0 7.5 V IF=10mA

IR Reverse Current Green 20 uA VR = 15V

Notes:

1. Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

Peak Wavelength Green 565 nm IF=10mA

Dominant Wavelength Green 568 nm IF=10mA

Spectral Line Half-width Green 30 nm IF=10mA

iewing

Angle [1]

2θ1/2

120°

Absolute Maximum Ratings at T

Parameter Green Units

Power dissipation 375 mW
Forward Current [1] 50 mA

Reverse Voltage 15 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3~5 Seconds

Notes:

1. The chips are three in series and two parallel.

2. 2mm below package base.

SPEC NO: DSAB6878 REV NO: V.8 DATE: MAY/04/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1338000069

A=25°C