Kingbright APTL 3216 ZGC Service Manual
www.DataSheet4U.com
3.2x1.6mm SMD CHIP LED LAMP
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
z LOW POWER CONSUMPTION.
z WIDE VIEWING ANGLE.
z IDEAL FOR BACKLIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z RoHS COMPLIANT.
Package Dimensions
Part Number: APTL3216ZGC Green
Description
The Green source color devices are made with AlInGaN
on Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3801 REV NO: V.1 DATE: APR/27/2007 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203006377
Selection Guide
V
Iv (mcd) [2]
Part No. Dice Lens Type
@ 20mA
Min. Typ. 2θ1/2
APTL3216ZGC Green (AlInGaN) WATER CLEAR 650 1100
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
iewing
Angle [1]
70
°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 515 nm I
λD [1] Dominant Wavelength Green 525 nm I
Δλ1/2 Spectral Line Half-width Green 30 nm I
C Capacitance Green 45 pF V
V
F [2] Forward Voltage Green 3.3 4.1 V IF=20mA
R Reverse Current Green 10 uA VR=5V
I
F=20mA
F=20mA
F=20mA
F=0V;f=1MHz
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter Green Units
Power dissipation 102.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH3801 REV NO: V.1 DATE: APR/27/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203006377
Loading...