XPower
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z PLCC-4 PACKAGE.
z SINGLE COLOR.
z HIGH LUMINANCE.
z HIGH POWER,OPERATING CURRENT @350mA.
z SUITABLE FOR ALL SMT ASSEMBLY METHODS.
z PACKAGE : 300PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Application Note
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Part Number : AAD1-1010QB9ZC Blue
Applications
z traffic signaling.
z backlighting (illuminated advertising , general lighting).
z interior and exterior automotive lighting.
z substitution of micro incandescent lamps.
z portable light source (e.g. bicycle flashlight).
z signal and symbol luminaire for orientation.
z marker lights (e.g. steps, exit ways, etc).
z decorative and entertainment lighting.
z indoor and outdoor commercial and residential
architectural lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 1 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892
Selection Guide
V
Part No.
Dice Lens Type
luminous Intensity [2]
Iv(cd)@ 350 mA
Φv (lm) [2]
@ 350 mA
Min. Typ. Min. Typ.
AAD1-1010QB9ZC BLUE (AlInGaN) WATER CLEAR 10.5 18 7 12
Notes:
1.θ1/2 is the angle from optical centerline where the luminous inte nsity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at T
Parameter Symbol Unit
Power dissipation Pt W
Reverse Voltage VR V
A=25°C
Value
1.22
not designed for reverse
operation
Junction temperature TJ 110 °C
Operating Temperature Top °C
Storage Temperature Tstg °C
DC Forward Current [1] IF mA
-40 To +85
-40 To +85
350
Peak Forward Current [2] IFM 500 mA
Thermal resistance [1] Rth °C/W
Notes:
1.Results from mounting on PC board FR4(pad size≥100mm
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
2
per pad), mounted on pc board-metal core PCB is recommend
55
iewing
Angle [1]
2θ1/2
20°
Electrical / Optical Characteristics at T
A=25°C
Parameter Symbol Value Unit
Wavelength at peak emission
F=350mA [Typ.]
I
Dominant Wavelength
F=350mA [Typ.]
I
Spectral bandwidth at 50%ΦREL MAX
IF=350mA [Typ.]
λpeak
λdom [1]
Δλ
Viewing angle at 50%ΦV [Typ.] θ
Forward Voltage IF=350mA [Min.]
Forward Voltage IF=350mA [Typ.] 3.5
VF [2]
Forward Voltage IF=350mA [Max.] 3.8
Reverse Current (VR=5V) [Max.] IR
Temperature coefficient of λpeak
I
F=350mA, -10°C≤ T≤100°C [Typ.]
Temperature coefficient of λdom
I
F=350mA, -10°C≤ T≤100°C [Typ.]
Temperature coefficient of VF
IF=350mA, -10°C≤ T≤100°C [Typ.]
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
TCλpeak 0.15
TCλdom 0.13
TCV -2.0
not designed for reverse
464 nm
466 nm
30 nm
20
2.7
operation
°
V
μA
nm/°C
nm/°C
mV/°C
SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 2 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892
Loading...