Kingbright AAAF 3528 QBFSEJZGE Service Manual
3.5X2.8mm SURFACE MOUNT SMD CHIP LED
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
OUTSTANDING MATERIAL EFFICIENCY.
LOW POWER CONSUMPTION.
ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN
ONE PACKAGE.
CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM,
INCLUDING WHITE LIGHT.
SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
PROCESS.
AVAILABLE ON TAPE AND REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.
Part Number: AAAF3528QBFSEJZGW
BLUE
HYPER ORANGE
GREE N
Description
The Blue source color devices are made with AlInGaN
on Al
The Super Bright de vice is based on a light emitting diode
chip made from AlGaInP and bonded on silicon substrate.
The Green source color devices are made with AlInGaN on
Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
substrate Light Emitting Diode.
2O3
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 1 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752
Selection Guide
V
Iv (mcd) [2]
Part No.
Dice Lens Type
Min. Typ. 2θ1/2
BLUE (AlInGaN)
AAAF3528QBFSEJZGW WHITE DIFFUSED
HYPER ORANGE ( AlGaInP )
GREEN (AlInGaN)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at T
A=25°C
110 250
900 1700
480 900
Symbol Parameter Device Typ. Max. Test Conditions Units
λpeak
λD [1]
Δλ1/2
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
C Capacitance
VF [2] Forward Voltage
IR Reverse Current
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Blue
Hyper Orange
Green
Blue
Hyper Orange
Green
Blue
Hyper Orange
Green
Blue
Hyper Orange
Green
Blue
Hyper Orange
Green
Blue
Hyper Orange
Green
461
640
515
465
630
525
25
25
30
100
27
45
3.3
2.0
3.3
nm IF=20mA
nm IF=20mA
nm IF=20mA
pF VF=0V;f=1MHz
4.0
2.8
4.1
10
10
10
@ 20mA
V IF=20mA
uA VR= 5V
iewing
Angle [1]
120°
Absolute Maximum Ratings at T
A=25°C
Parameter Blue Hyper Orange Green Units
Power dissipation 120 140 123 mW
DC Forward Current 30 50 30 mA
Peak Forward Current [1] 150 150 150 mA
Reverse Voltage V
Operating / Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
5
-40°C TO +85°C
SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 2 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752
AAAF3528QBFSEJZGW
Blue
SPEC NO: DSAH1813 REV NO: V.1 DATE: JAN/31/2007 PAGE: 3 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201002752
Loading...