Kingbright AAAF 3528 PBGSEJVGAW Service Manual

3.5X2.8mm SURFACE MOUNT SMD CHIP LED

PRELIMINARY SPEC

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Features

OUTSTANDING MATERIAL EFFICIENCY.
LOW POWER CONSUMPTION.
ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN

ONE PACKAGE.

CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM,

INCLUDING WHITE LIGHT.

SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER

PROCESS.

AVAILABLE ON TAPE AND REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.

Part Number: AAAF3528PBGSEJVGAW
BLUE
HYPER ORANGE
GREEN

Description

The Blue source color devices are made with InGaN on
SiC Light Emitting Diode.
The Super Bright device is based on a light emitting diode
chip made from AlGaInP and bonded on silicon substrate.
The Green source color devices are made with InGaN on
G-SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.008") unless otherwise noted.

3.Specifications are subject to change without notice.

4.The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAH1780 REV NO: V.1 DATE: JAN/30/2007 PAGE: 1 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP:1201002750

Selection Guide

V

Part No.

BLUE (InGaN)

AAAF3528PBGSEJVGAW

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

2. Luminous intensity / luminous Flux: +/-15%.

HYPER ORANGE (AlGaInP) 900 1700
GREEN (InGaN) 110 330

Dice Lens Type

WHITE DIFFUSED

Iv (mcd) [2]

@ 20mA

Min. Typ.

70 200

iewing

Angle [1]

2θ1/2

120°

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak

λD [1]

Δλ1/2

C Capacitance

VF [2] Forward Voltage

IR Reverse Current

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

Peak Wavelength

Dominant Wavelength

Spectral Line Half-width

Blue
Hyper Orange
Green

Blue
Hyper Orange
Green

Blue
Hyper Orange
Green

Blue
Hyper Orange
Green

Blue
Hyper Orange
Green

Blue
Hyper Orange
Green

468
640
520

470
630
525

26
25
35

110

27

100

3.6

2.0

3.2

nm IF=20mA

nm IF=20mA

nm IF=20mA

pF VF=0V;f=1MHz

4.3

2.8

4.0
10

10
10

V IF=20mA

uA VR = 5V

Absolute Maximum Ratings at T

Parameter Blue Green Units

Power dissipation 129 200 mW
DC Forward Current 30 50 mA
Peak Forward Current [1] 150 100 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

SPEC NO: DSAH1780 REV NO: V.1 DATE: JAN/30/2007 PAGE: 2 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP:1201002750

A=25°C

Hyper Orange

140

50

150

AAAF3528PBGSEJVGAW
Blue

SPEC NO: DSAH1780 REV NO: V.1 DATE: JAN/30/2007 PAGE: 3 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP:1201002750