Kingbright AAA 5060 SURVGAPBEC Service Manual
5.0mm x 6.0mm FULL COLOR SURFACE
MOUNT LED LAMP
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
CHIPS CAN BE CONTROLLED SEPARATELY.
SUITABLE FOR ALL SMT ASSEMBLY AND
SOLDER PROCESS.
AVAILABLE ON TAPE AND REEL.
PACKAGE: 500PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.
Part Number: AAA5060SURVGAPBEC
HYPER RED
GREEN
BLUE
Description
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN on
G-SiC Light Emitting Diode.
The Blue source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 1 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374
Selection Guide
V
Iv (mcd) [2]
Part No.
AAA5060SURVGAPBEC
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. *Luminous intensity with asterisk is measured at 30mA; Luminous intensity / luminous flux: +/-15%.
HYPER RED (InGaAIP)
GREEN (InGaN)
BLUE (InGaN)
Dice Lens Type
WATER CLEAR
@50mA *30mA
Min. Typ.
380 500
*180 *350
*110 *250
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Test Conditions Units
λpeak
λD [1]
Δλ1/2
C Capacitance
VF [2] Forward Voltage
IR Reverse Current
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
Hyper Red
Green
Blue
640
520
465
628
525
470
27
35
25
45
100
110
1.9
3.2
3.7
nm IF=20mA
nm IF=20mA
nm IF=20mA
pF VF=0V;f=1MHz
2.5
4.0
4.3
10
10
10
iewing
Angle [1]
2 θ 1/2
100°
V IF=20mA
uA VR = 5V
Absolute Maximum Ratings at T
Parameter Hyper Red Green Blue Units
Power dissipation [2] mW
DC Forward Current 50 50 30 mA
Peak Forward Current [1] 185 100 160 mA
Reverse Voltage 5 5 5 V
Operating / Storage Temperature -40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Within 350mW at all chips are lightened.
SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 2 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374
A=25°C
350
AAA5060SURVGAPBEC
Hyper Red
SPEC NO: DSAG5855 REV NO: V.1 DATE: JUN/21/2006 PAGE: 3 OF 7
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002374
Loading...