Kingbright AAA 5060 SUREVGEC Service Manual
5.0mm x 6.0mm BI-COLOR SURFACE MOUNT
LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
CHIPS CAN BE CONTROLLED SEPARATELY.
SUITABLE FOR ALL SMT ASSEMBLY AND
SOLDER PROCESS.
AVAILABLE ON TAPE AND REEL.
PACKAGE: 500PCS / REEL.
RoHS COMPLIANT.
AAA5060SUREVGEC HYPER RED / GREEN
Description
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD0905 REV NO: V.5 DATE: MAR/14/005 PAGE: 1 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000783
Selection Guide
Viewing
Iv (mcd)
Part No. Dice Lens Type
AAA5060SUREVGEC
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. * Luminous intensity with asterisk is measured at 30mA.
GREEN (InGaN)
HYPER RED (InGaAlP)
WATER CLEAR
@50mA*30 mA
Min. Typ.
380 700
*280 *600
Angle
2 θθθθ 1/2
100°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
λD
∆λ1/2
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
C Capacitance
VF Forward Voltage
I
R
Reverse Current All 10 uA VR = 5V
Hyper Red
Green
Hyper Red
Green
Hyper Red
Green
Hyper Red
Green
Hyper Red
Green
640
518
630
525
25
36
45
50
1.9
3.5
2.5
4.5
nm IF=20mA
nm IF=20mA
nm IF=20mA
pF VF=0V;f=1MHz
V IF=20mA
Absolute Maximum Ratings at T
Parameter Hyper Red Green Units
Power dissipation 125 135 mW
DC Forward Current 50 30 mA
Peak Forward Current [1] 200 150 mA
Reverse Voltage 5 5 V
Operating / Storage Temperature -40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0905 REV NO: V.5 DATE: MAR/14/005 PAGE: 2 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000783
A=25°C
Loading...