Built-in oven
KPR 40
Instruction booklet
35678-3801 08/02 GRAFICHE MDM - Forlì
Important Safety Information
It is of the utmost importance that this booklet be kept with the appliance, so that it can be
consulted for any reason.Should the appliance be sold or transferred to another owner,
please ensure that the booklet goes with it, so that the new user is able to become familiar
with its operation and the relevant warnings.
These warnings have been included for your safety and for that of others. We ask you,
therefore, to read them carefully before installing and using the appliance.
Installation
l Any modification of the domestic electrical
system which may be necessary prior to the
installation of the appliance should be
carried out solely and exclusively by
competent personnel.
Child Safety
l This appliance has been designed for use
by adults. Care should therefore be taken
that children do not attempt to play with it.
l The oven remains hot for a considerable
length of time after being switched off.
Children must be watched continuously,
and special care should be taken that they
neither touch the surfaces and nor play
anywhere near the appliance, either when it
is in operation or before it has cooled down
completely.
During Use
l This product was designed for cooking
food, and must not be used for other
purposes.
l Care must also be taken when using spray
cleaning products . Never direct the spray
onto the filter (in those appliances which
possess one), the resistances and the
thermostat bulb.
l Always use oven gloves when removing
dishes from the oven.
l It is dangerous to modify or attempt to
modify the characteristics of the appliance.
l Ensure that the control knobs are in the
0 position when the appliance is not in
operation.
l Always insert the dripping-pan when using
the grill or cooking meat on the grill.
l Make sure that the oven grills have been
inserted correctly.
2
l Ensure that the appliance is unplugged and
completely cooled before undertaking any
maintenance or cleaning operation.
l Do not line the walls of the oven, especially
the lower part, with tinfoil.
l Pour a little water into the dripping-pan to
avoid burning fats producing unpleasant
odours.
l For reasons of hygiene and safety this
appliance must always be kept clean (see
relative instructions).
l When the oven and the grill are in use the
appliance is subject to considerable
heating of the glass of the oven door and the
adjacent parts. Care should therefore be
taken that children do not attempt to play
anywhere near it.
l If other electrical appliances are plugged
into a socket near the oven, make sure that
the cable neither touches the heated
cooking zones nor gets caught in the oven
door.
Technical Assistance
l In the case of technical problems, contact
your nearest Technical Assistance Centre
and be sure to ask for original spare parts.
l Never attempt to carry out any type of repair
yourself. Repairs done by unqualified
individuals can cause damage to the
appliance. Contact your nearest Assistance
Centre and use only original spare parts.
Environmental Information
l After installation, please dispose of the
packaging with due regard to safety and the
environment.
l When disposing of an old appliance, make it
unusable, by cutting off the cable.
Contents
Instructions for the User
Important Safety Information 2
Before the First Use 3
Description of the Appliance 4
Operation 4
Electronic Programmer 6
Grease Filter 9
Using the Oven 9
The Conventional Oven 11
Using the Fan Oven 13
Defrosting 15
Grilling 16
Cleaning and maintenance 18
The Guarantee 23
Service and spare parts 23
MANUFACTURER: ELECTROLUX ZANUSSI S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
Instructions for the Installer
Instructions for the installer 20
Building in 20
Electrical connection 22
Guide to Use the instructions
The following symbols will be found in the
text to guide you throughout the Instructions:
F
Safety Instructions
Step by step instructions for an
operation
Hints and Tips
Environmental information
Before the First Use
Remove all packaging, both inside
and outside the oven, before using the
appliance.
Before first use, the oven should be heated
without food. During this time, an unpleasant
odour may be emitted. This is quite normal.
Proceed as follows:
F
1. Switch the oven function control knob to
fan cooking .
2. Set the thermostat control knob to MAX.
3. Open a window for ventilation.
4. Allow the oven to run empty for
approximately 45 minutes.
This procedure should be repeated with the
grill function for approximately 5-10 minutes.
FO 0799
To open the oven door, always
catch the handle in its central
part.
3
0
Description of the Appliance
5
6
1. Control Panel
1
7
8
9
11
2. Electronic Programmer
3. Oven function Control Light
4. Thermostat Control Light
5. Oven Function Control Knob
6. Thermostat Control Knob
7. Electric Grill
8. Oven Lamp
9. Oven Fan
10. Telescopic runners:
11. Oven Door
10
3
4
2
Operation
Oven function control knob
The oven function control knob can be set
on the following symbols and functions:
Oven light
Top and bottom heating elements
Top heating element
Bottom heating element
Simple grill element
Double grill element
Fan grill element
Fan cooking
Defrosting
4
FO 2537
Thermostat control knob
Turn the thermostat control knob clockwise
to select temperatures between 50°C and
250°C (MAX).
Thermostat control light (°C)
Once the oven temperature has been
selected, the temperature light will come
on and remain on until the oven has
reached the correct setting; after that, it will
go on and off with the thermostat, showing
how the temperature is being maintained.
Oven control light
It will come on every time an heating
element is set on operation.
The Safety Thermostat
This oven is provided with a safety
thermostat. In case of malfunctioning of the
main thermostat, and consequent overheating, the safety device will stop the
power supply to the appliance. If this
happens, call your local Service Centre.
Under no circumstances should you
attempt to repair the appliance yourself.
50
250
100
200
150
FO 2671
Cooling fan
The cooling fan operates during cooking.
Air is expelled through vents between the
oven door and the control panel, as shown
in the diagram. The cooling fan may run
on after the oven is switched off to keep
the controls cool. This is quite normal.
5
Electronic Programmer
4
5
6
123
The oven will work only if the time of day has been
set. Moreover, the oven can also be operated without
any programme.
FO 2571
1. Push button for selecting a function
2. Decreasing control button
3. Increasing control button
7
4. Display
8
5. Cooking Duration pilot lamp
6. End of cooking pilot lamp
7. Minute minder pilot lamp
8. Time of day pilot lamp
Setting the time of day
When the power supply is switched on, or after a power
failure, the Time of day pilot lamp will flash on the display.
To set the correct time of day:
1. press button or .
2. After the setting is carried out, wait for 5 seconds: the
Time of day pilot lamp will go out and the display
will show the set time. The appliance is ready for use.
To reset the correct time of day:
1. press button repeatedly to select the Time of day
function. The relevant pilot lamp will start flashing. Then
proceed as described above.
The time of day can only be reset if no automatic function
(cook duration or end of cooking ) has been set.
Cooking Duration function
Thanks to this function, the oven will automatically switch off
at the end of a programmed cooking duration time. Place
food in the oven, select a cooking function and adjust the
cooking temperature. Press button repeatedly to select
the Cooking Duration function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
To set the duration time:
1. press button or .
2. After the setting is carried out, wait for 5 seconds: the
6
"Cooking Duration" pilot lamp will come on and the
display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: when doing this operation, the oven will be
operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero at the
end of the cooking time.
To cancel the duration time:
1. Press button repeatedly to select the Cooking
Duration function. The relevant pilot lamp will flash
and the display will show the remaining cooking time.
2. Press button until the display shows 0:00. After 5
seconds the pilot lamp will go out and the display will
revert to the time of day.
End of cooking function
Thanks to this function, you can set the oven to switch off
automatically when a programmed end of cooking time is
over. Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button repeatedly
to select the End of cooking function. The relevant pilot
lamp will start flashing. Then, proceed as follows:
To set the End of cooking time:
1. press button or .
2. After the setting is carried out, wait for 5 seconds: the
End of cooking pilot lamp will come on and the
display will revert to the time of day.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard,
while the pilot lamp will start flashing. Turn the oven
function and the thermostat control knob to zero.
To switch off the acoustic alarm, press any button.
NOTE: when doing this operation, the oven will be
operated again, therefore, remember to turn the oven
function and the thermostat control knob to zero when
cooking is over.
To cancel the End of cooking time:
1. Press button repeatedly to select the End of
cooking function. The relevant pilot lamp will flash
and the display will show the programmed End of
cooking time.
7
Loading...