KING K601C-25 User Manual

www.king-electric.com

good - line voltage

EURO STYLE SINGLE OR DOUBLE POLE LINE VOLTAGE

UPC

#093319

Part#

Single Pole Euro Style

w/ Thermometer

Single Pole Euro Style

w/ Thermometer

Double Pole Euro Style

w/ Thermometer

Double Pole Euro Style

w/ Thermometer

K601 T

MODEL

K601 19157 Single Pole Euro Style Box (25 pieces) White 22 18 45°F - 75° F

K601A 19161 Single Pole Euro Style Almond 22 18 45°F - 75° F

K601T 19158

K601TR 19162

K602 19159 Double Pole Euro Style Box (25 pieces) White 22 18 45°F - 75° F

K602A 19164 Double Pole Euro Style Almond 22 18 45°F - 75° F

K602T 19160

K602TR 19163

* a master pack of 4 - 10 packs is available (40 units total)

TYPE PACKAGE COLOR

Box (25 pieces) White 22 18 45°F - 75° F

Clamshell*
(10 pieces)

Box (25 pieces) White 22 18 45°F - 75° F

Clamshell*
(10 pieces)

White 22 18 45°F - 75° F

White 22 18 45°F - 75° F

AMPS

120-240

AMPS

277

SERIES

TEMP.

RANGE

K602

These good thermostats have a
larger, more sensitive, bi-metal
sensor that improves temperature
accuracy to ±3°F. This feature
achieves a better comfort level
with a reduced temperature swing
as compared to economy models.
The rounded corners give a
modern appearance while the
large knob allows for easy
adjustment. The standard color
is white. Add (-T) for models that
include a room thermometer.

SPECIFICATIONS

Temperature Range:
45°F to 75°F (7°C to 24°C)
Temperature Default:
55°F or 68°F (13°C or 20°C)

Display: 5° increments
Rate: 2 cycles per hour
Accuracy: ±3°F
Power Source: 120 VAC,

208VAC - 240VAC,
277 VAC
50 - 60Hz
Dimensions:

FEATURES TECHNICAL

· Even temperature settings.

· Internal heater simulates room
heater warming up space.

· Rounded face gives modern
appearance.

· Single or double pole (positive
off) available.

· Optional thermometer on cover

shows temperature.

· White color with gray print.

· Fully vented cover allows air

sensing in all directions.

· Large knob allows easy

adjustment to all temperatures.

· 75°F (°24C) maximum setting

provides compliance with
some state energy codes, like
California’s Title 24.

· 22 Amps at 240V, 5,280 Watts.

· Three wire installation.

· Snap action switch.

· Flexible wire leads.

· 45° to 75°F (7°C to 24°C).

· Large bi-metal sensor.

· 120/208/240/277 Volts.

· New rounded styling.

· (T) - designates thermometer.

· For use on all types of electric
heaters, fan-forced, baseboard,
radiant, etc.

King Electrical Manufacturing Company / 9131 10th Avenue South, Seattle, WA 98108 / phone [phone] / fax [phone]

www.king-electric.com

good – line voltage

EURO STYLE SINGLE OR DOUBLE POLE LINE VOLTAGE (CONTINUED)

INSTALLATION NOTES

This line voltage device should
be installed and serviced by
a qualified electrician. The
thermostat has been designed
to mount to a standard 2"X 4"
electrical outlet box. Leveling of
the thermostat is not required.
Mounting screws are provided.
Mount the thermostat about five
feet above the floor in an area
with good air circulation. Avoid
mounting the thermostat where it
will be affected by drafts, air from
ducts and radiant heat sources
such as appliances, the sun,
lamps or hot water pipes.

K601 K602

L1 L2

RED

THERMOSTAT

BLACK

HEATER

UP TO 5280 WATTS

WIRING DIAGRAM

BLACK

L1 L2

RED

THERMOSTAT

BLACK

HEATER

UP TO 5280 WATTS

RED

ON / OFF

SWITCH

SERIES

· After about 7 years thermostats
are not as accurate. Replacing
them with a new anticipated
model will reduce the
temperature swings that are
common with older thermostats.

·Thermostats should be mounted
on an inside wall for best
performance.

· Mounting a thermostat above a
fan wall heater will not hinder
the performance of a high
quality thermostat.

· Keep lamps or any other forms
of heat (like in-wall hot water
pipes or the sun) away from the
thermostat location for the most
accurate control of a zone or space.

CALIBRATION ADJUSTMENTS

Thermometer Cover

Turn nut to adjust thermometer

HE-1 & K601

Single Pole

K601 calibration screw

Adjust calibration here

(3/32" hex allen wrench required)

HE-2 & K602

Double Pole

ON / OFF Switch

TO CHANGE CALIBRATION:

•

3/32" hex allen wrench required

• CLOCKWISE to DECREASE

maximum temperature setting
of dial

• COUNTERCLOCKWISE to

INCREASE maximum temperature
setting of dial

• To prevent unwanted movement

of calibration screw once set,
place a drop of fingernail polish
or glue on screw.

Note: Overtightening of mounting
screws can twist base and alter
calibration. To solve this loosen
mounting screws.

King Electrical Manufacturing Company / 9131 10th Avenue South, Seattle, WA 98108 / phone [phone] / fax [phone]