
www.king-electric.com
better – line voltage
EURO STYLE ANTICIPATED SINGLE OR DOUBLE POLE LINE VOLTAGE
UPC
HET-1
HE-1
HE-1A
HET-1
HE-2
HE-2A
HET-2
#093319
PART #
19063
19064
19069
19070
19066
19067
19071
19072
19166
MODEL
HET-1R
HET-2R
HE-2-25
* a master pack of 4 - 10 packs is available (40 units total)
TYPE
Euro Style, Anticipated
Euro Style, Anticipated
Euro Style, Anticipated
w/ thermometer
Euro Style, Anticipated
w/ thermometer
Euro Style, Anticipated
Euro Style, Anticipated
Euro Style, Anticipated
w/ thermometer
Euro Style, Anticipated
w/ thermometer
Euro Style, Anticipated
POLES
Single
Single
Single
Single
Double
Double
Double
Double
Double
PACKAGING
Box (50 pieces)
Box (50 pieces)
Box (50 pieces)
Clamshell*
(10 pieces)
Box (50 pieces)
Box (50 pieces)
Box (50 pieces)
Clamshell*
(10 pieces)
Box (50 pieces)
COLOR
White
Almond
White
White
White
Almond
White
White
White
SERIES
AMPS
AMPS
120-
277
240
22 55°F - 85° F
18
22
18
22
18
22
18
22
18
22
18
22
18
22
18
25
22
TEMP.
RANGE
55°F - 85° F
55°F - 85° F
55°F - 85° F
55°F - 85° F
55°F - 85° F
55°F - 85° F
55°F - 85° F
55°F - 85° F
HE-2
These better thermostats have a
larger, more sensitive, bi-metal
sensor that improves temperature
accuracy to ±1½°F. You will
achieve a better comfort level with
a reduced temperature swing as
compared to economy models.
The rounded corners give a
modern appearance while the
large knob allows for easy
adjustment. The standard color
is white with limited models in
almond (-A). Add (-T) for models
that include a room thermometer.
SPECIFICATIONS
Temperature Range:
°F to 85°F (13°C to 29°C)
55
Display: 5° increments
Rate: 2 cycles per hour
Accuracy: ±1½°F
Power Source: 120 VAC,
208VAC - 240VAC,
277 VAC
50 - 60Hz
Dimensions:
FEATURES
·
Save up to 10% on heating costs.
· Even temperature settings.
· Internal heater simulates room
heater warming up space.
· Faster cycle rate reduces
temperature swings.
· Rounded face gives modern
appearance.
·
Complies with all energy codes
requiring anticipated thermostats.
· Single or double pole (positive
off) available.
· Optional thermometer on cover
shows temperature.
· White color with gray print.
· Fully vented cover allows air
sensing in all directions.
· Large knob allows easy
adjustment to all temperatures.
·
85°F (29°C) maximum setting
provides compliance with some
state energy codes, like
California’s Title 24.
TECHNICAL
· 22 Amps at 240V, 5,280 Watts.
· Three wire installation.
· Snap action switch.
· Flexible wire leads.
·
55° to 85°F (
· Anticipated (resistor style).
· Large bi-metal sensor.
· 120/208/240/277 Volts.
· New rounded styling.
· (T) - designates thermometer.
· Meets most energy codes
· ±2°.
· For use on all types of electric
heaters, fan-forced, baseboard,
radiant, etc.
13°C - 29°C).
King Electrical Manufacturing Company / 9131 10th Avenue South, Seattle, WA 98108 / phone 206.762.0400 / fax 206.763.7738

www.king-electric.com
better – line voltage
EURO STYLE ANTICIPATED SINGLE OR DOUBLE POLE LINE VOLTAGE (CONTINUED)
WIRING DIAGRAM
HE-1 / HE-1-25 HE-2 / HE-2-25
(RESISTOR)
UP TO 5280 WATTS UP TO 5280 WATTS
INSTALLATION
This line voltage device should
be installed and serviced by
a qualified electrician. The
thermostat has been designed
to mount to a standard 2" X 4"
electrical outlet box. Leveling of
the thermostat is not required.
Mounting screws are provided.
Mount the thermostat about five
feet above the floor in an area
with good air circulation. Avoid
mounting the thermostat where it
will be affected by drafts, air from
ducts, and radiant heat sources
such as appliances, the sun,
lamps or hot water pipes.
SERIES
NOTES
· After about 7 years thermostats
will not be as accurate as when
they were new. Replacing them
with a new anticipated model
will reduce the temperature
swings that are common with
older stats.
· Thermostats should be
mounted on an inside wall for
best performance.
· Mounting above a fan wall
heater will not hinder the
performance of a high
quality thermostat.
· Keep lamps or any other form
of heat (such as in-wall hot
water pipes or the sun) away
from the thermostat location
for the most accurate control
of a zone or space.
King Electrical Manufacturing Company / 9131 10th Avenue South, Seattle, WA 98108 / phone 206.762.0400 / fax 206.763.7738