KING Falcon KF1000, KWM1000, Falcon KF1001 Installation And Operating Instructions Manual
Automatic Directional Wi-Fi Antenna
Installation and Operating Instructions
KF1000 • White
KF1001 • Black
includes the KING
WiFiMax Router
KWM1000
CONTENTS
OPERATION ....................................................................................... 1-20
INSTALLATION ................................................................................ 22-29
TROUBLESHOOTING ........................................................................... 30
SPECIFICATIONS ................................................................................. 31
LIMITED WARRANTY ........................................................................... 32
WIRELESS REGULATORY INFORMATION ......................................... 33
NOTE: Please read thru this manual before using or installing.
You will need to download the free KING Wi-Fi app to
use this product (see page 1).
Record your serial number.
Thank you for choosing a KING Falcon antenna!
The KING Falcon is an outdoor, automatic directional 2.4GHz Wi-Fi antenna. Using
the KING Wi-Fi app, the KING Falcon automatically rotates and scans 360 degrees
and shows you all of the available networks. Simply tap the network you want and the
KING Falcon automatically aims itself to get the best performance from that network.
The KING WiFiMax Wi-Fi Router/Range Extender creates your own private and secure
Wi-Fi network, just like you have in your home. When you are in range of an available
network, simply congure your KING WiFiMax to connect to that network, and it then
extends the internet access from that network to your own private Wi-Fi network.
BEFORE USING YOUR KING FALCON ANTENNA
Before using the KING Falcon, you must download the free KING Wi-Fi app
from the Apple® App Store® or Google Play™ Store.
When in the store, search for “KING Wi-Fi.”
Make sure the power inserter and the KING WiFiMax router are connected
and plugged in as shown.
Do not power wash any part of the
KING Falcon antenna head or base mount.
FIRST-TIME USE: Go to the next page and follow the rst-time use instructions.
IF YOU HAVE COMPLETED FIRST-TIME USE: Go to STANDARD OPERATION on
page 16.
Do not operate the KING Falcon while the vehicle is in motion.
The KING Falcon will not locate Wi-Fi signals while the vehicle is in motion.
You must leave the power inserter and KING WiFiMax connected and plugged in while using your Wi-Fi.
Any time you move your vehicle, you will have to scan for a network again.
OPERATING NOTES
Page 1
FIRST-TIME USE
1. SET UP KING WIFIMAX
NOTE: Make sure your KING WiFiMax and power injector are connected and powered on as
shown on page one (blue lights on both devices will turn on when power is connected).
To maintain the best connection to your KING WiFiMax, it is
suggested that the cellular network on your smart phone or
TIP
tablet be turned off while completing the rst-time setup.
Back to Settings
WiFi
ON
Choose a Network...
1. Go to your smart phone or tablet’s Wi-Fi settings page
and connect to the KING 5G network:
KING_XXXXXX_5G
XXXXXX is a number/letter combination
unique to your router and can be found on the
TIP
bottom of your router in the SSID row.
If you do not see KING_XXXXXX_5G (5GHz network), connect to KING_XXXXX (2.4GHz
network).
Always choose the 5G network if possible, as it is faster than the 2.4GHz network.
KING_XXXXXX_5G
KING_XXXXXX
Fun Lake Campground
Dad’s Campground
Chat Cafe
Campit Here
Graphics will vary.
KC1074
Page 2
132
2. Open the KING Wi-Fi app and tap “Get Started.”
Get Started
3. Tap “Continue” to begin your
KING WiFiMax setup.
Back
Let’s Get Started
WiFiMax Setup
Antenna Pairing to Device
Scanning, Selecting, Locating Networks
Continue
KC1131
KC1
Back
4. Tap “OK” on the pop up screen.
Please configure your WiFi
Max’s network name.
Cancel OK
KC1121
Page 3
KC1096
KC1095
TIP
Use your phone or tablet's zoom functionality
to change the view of your screen.
5. This screen should appear. Tap “WiFi Settings” in the left-hand column.
Internet Status
Internet Status
Internet Settings
WiFi Settings
Parental Control
VPN
Advanced Settings
System Settings
Repeating failed.
Upstream Router My Router
-- --
Current Speed
2.4 GHz: King_XXXXXX
5 GHz: King_XXXXXX_5G
WAN IP Address
6. This screen should appear. Tap “WiFi Name & Password.”
English Exit
Online: 1
WiFi Extender
V15.03.05.16_multi
Firmware Version
WiFi Settings
Internet Status
Internet Settings
WiFi Settings
Parental Control
VPN
Advanced Settings
System Settings
WiFi Name & Password
Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High
Beamforming+
Page 4
Wireless Repeating
AP Mode
Channel & Bandwidth
Anti-interference
AutoDisableEnable
English Exit
Transmit Power
7. The screen below should appear. Here you MUST change your Wi-Fi name and password to
KC1097
personalize it and keep it secure. Do steps A and B for both the 2.4 GHz and 5GHZ networks
(you will only have to do this once).
When entering your new names, make sure to completely erase the
• Enter a new
A
Wi-Fi name.
TIP
existing names in the boxes.
Add “_5G” after your 5GHz network name to differentiate it from your
2.4GHz network name.
KING highly recommends password protecting your name. Choose
B
• Enter a password.
TIP
WPA/WPA2-PSK under “Encryption Mode” to enable password protection.
Passwords can be the same for both networks if you wish, and must be at
least 8 characters.
When you have entered names and passwords for both networks, tap “Save.”
Tap the “X” to exit the KING WiFiMax setup screen.
2.4G
WiFi Settings
Internet Status
Internet Settings
WiFi Settings
Parental Control
VPN
Advanced Settings
System Settings
WiFi Name & Password
WiFi Name & Password
A
Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High
B
Beamforming+
A
B
2.4 GHz Network
Wireless Repeating
WiFi Name: Hide
Encryption Mode:
WiFi Password:
5 GHz Network
WiFi Name: Hide
Encryption Mode:
WiFi Password:
Enter name here
WPA/WPA2-PSK
Enter password here
AP Mode
Enter name here_5G
WPA/WPA2-PSK
Enter password here
Channel & Bandwidth
Anti-interference
AutoDisableEnable
Transmit Power
encryption mode to
enable password
Write your network name here: Write your password here:
English Exit
X
Choose this
protection.
Write your network name here: Write your password here:
5G
You have personalized your router setup.
Continue on next page.
Page 5
2. CONNECT TO THE KING WIFIMAX WITH YOUR
PERSONALIZED NETWORK NAME
1. Once you have congured your KING WiFiMax network names
in the previous step, this pop up will appear.
Do not click on “OK.” Instead, exit the app.
STOP STOP
Back
Please connect this device
to your WiFiMax network.
OK
KC1121
For best performance, choose the 5GHz
TIP
network whenever possible.
2. Go to your smart phone or tablet’s Wi-Fi settings page
and connect to the Wi-Fi Network with your personalized
network name.
If your device cannot connect to your 5GHz network,
connect to your other network.
Example:
“MyWiFiName_5G”
This will be the name you
created in step 7, page 5.
Back to Settings
WiFi
Choose a Network...
MyWiFiName_5G
MyWiFiName
Fun Lake Campground
Dad’s Campground
Chat Cafe
ON
Page 6
Campit Here
KC1075
Back
Please connect this device
to your WiFiMax network.
3. Once you have connected, return to the app and
tap "OK" in the pop up window.
When the next screen appears, tap the “X” in the
upper left hand corner.
The KING WiFi app will conrm your KING WiFiMax
setup and that the connection was successful.
(Check mark turns green.)
OK
KC1121
Back
Let’s Get Started
WiFiMax Setup
4. To pair your antenna, tap "Continue"
and go to the next page.
Antenna Paired
Scanning, Selecting, Locating Networks
Continue
KC1122
Page 7
3. PAIR YOUR KING FALCON ANTENNA
1. A list of available KING Falcon antennas to connect to will appear.
Identify your antenna and tap to select it.
If more than one antenna appears in the list:
Match the last 5 digits of the antenna number to the
TIP
serial number on the back of your KING Falcon to
ensure you are selecting the correct antenna.
Back
Tap below to pair you KING Falcon
KSA02541
KC1134
2. Enter the default PIN number, "0000" and tap “Continue”
to pair your antenna.
You will be prompted to change your PIN - see next page.
KSA02541
Example only:
your number will be different.
Select Device
If you have previously reset this device or if this is a
new device, enter 0000.
1234
Continue
Page 8
2 2
4
G H I
7
P Q R S
A B C
5
J K L
7
T U V
0
D E F
M N O
W X Y Z
3
6
7
KC1120
KC1135
Select Device
If you have previously reset this device or if this is a
0000
3. For increased security, you can change your PIN.
A second dialog box will allow you to do so.
If you do not wish to, tap “Cancel.”
Write your PIN here:
Only one smart phone or tablet can be paired with your KING Falcon antenna at a time.
In the event you need to switch control of the KING Falcon antenna to a different device,
and don’t have the PIN, a PIN reset may be required.
Being paired with the antenna allows the user to aim and select upstream networks.
TIP
You do NOT need to be paired to the KING Falcon to be connected to your personalized
KING WiFiMAX network.
To UN-pair from a KING Falcon antenna, choose a different Wi-Fi network from your
smart phone or tablet’s settings or shut off your smart phone or tablet’s Wi-Fi connectivity.
Reset PIN
Continue
Enter a new 4 digit numerical PIN
1234
Cancel Set
2 2
4
G H I
7
P Q R S
A B C
5
J K L
7
T U V
0
D E F
M N O
W X Y Z
3
6
7
KC1120
KC1136
The app will conrm your KING Falcon antenna is
properly paired with your smart phone or tablet.
(Check mark turns green.)
4. To scan for and select available Wi-Fi networks,
tap "Continue” and go to the next page.
Back
Let’s Get Started
WiFiMax Setup
Antenna Paired
Scanning, Selecting, Locating Networks
Continue
KC1122
Page 9
Loading...