KING Axle-King-pin-kits User Manual

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

Table of Contents

Spicer Front Steer Axles - D Series ............................................................................................................ . 2

Spicer Front Steer Axles - E Series Single Draw Key ................................................................................. . 3

Spicer Front Steer Axles - E Series Dual Draw Key .................................................................................... . 4

Spicer Front Steer Axles - EFA Series ........................................................................................................ . 5

Spicer Front Steer Axles - I Series .............................................................................................................. . 6

Spicer Front Steer Axles - I Series .............................................................................................................. . 7

Tie Rod Ends by Length (Ball Center to End) - E, I, D & EFA Series ......................................................... . 8

King Pin Kit Contents - D Series ................................................................................................................. . 9

King Pin Kit Contents - EFA & E Series ...............................................................................................10 - 13

King Pin Kit Contents - I Series ............................................................................................................14 - 16

Cross Reference ..................................................................................................................................17 - 20

Torque Speciﬁ cations ........................................................................................................................... 21 - 22

King Pin / Tie Rod End Illustrated Parts List (IPL) and Service Manual Reference ................................... ..22

King Pin Part Number Cross Reference to Kits ...........................................................................................23

DISCLAIMER

WHILE EVERY EFFORT HAS BEEN MADE TO PROVIDE ACCURATE INFORMATION, NO GUARANTEE IS IMPOSED OR IMPLIED AS TO THE ACCURACY OF THE INFORMATION PROVIDED IN THIS PUBLICATION. DANA LIMITED IS NOT RESPONSIBLE FOR TYPOGRAPHICAL OR PICTORAL ERRORS. NO REPRESENTATION IS MADE IN REGARD TO THE SOURCE OF MANUFACTURE OF ANY SPECIFIC COMPONENT. COMPONENTS LISTED IN THIS PUBLICATION ARE NOT NECESSARILY MANUFACTURED BY THE ORIGINAL EQUIPMENT MANUFACTURER. ACTUAL PRODUCTS SUPPLIED MAY VARY. IF YOU HAVE QUESTIONS, PLEASE CONTACT US AT 1-800621-8084 DURING REGULAR BUSINESS HOURS. WE WILL MAKE EVERY EFFORT TO PROVIDE YOU THE MOST ACCURATE, UP TO DATE INFORMATION; HOWEVER, IT IS ULTIMATELY YOUR RESPONSIBILITY, AS A USER, TO VERIFY THAT ALL DETAILS LISTED ARE ACCURATE.

TRADEMARKS

REFERENCE TO COMPONENT NUMBERS OR TRADEMARKS OF OTHER COMPANIES ARE INTENDED ONLY FOR CROSS REFERENCE INFORMATIONAL PURPOSES. TRADEMARKS OF OTHER COMPANIES REFERRED T O IN THIS PUBLICATION (DAYTON PARTS®,

®

EUCLID THEIR RESPECTIVE ORGANIZATIONS AND ARE NOT AFFILIATED IN ANY WAY WITH DANA LIMITED PROVIDED FOR ILLUSTRATIVE PURPOSES ONLY.

, FLAGG®, FLEETRITE®, KAISER®, MERITOR®, MOOG®, NAVISTAR®, PERFECT CIRCLE®, TRW®), ARE SOLE PROPERTY OF

®

. DRAWINGS AND PHOTOS ARE

1

Spicer

®

King Pin Kits & Tie Rod Ends

D-2000, D-2200

D-600N/F, D-700N/F, D-800F/W, D850F/W

For an illustrated parts listing (IPL) of all D Series components, refer to AXIP-0090 on Spicerparts.com

N (Narrow), F (Standard), W (Wide)

HX700-8-2013

MAJOR OEM &

MODEL

INFORMATION

AXLE

RATING

LBS

6-8500 6-8500

6-8500 6-8500 6-8500 6-8500

20-22000

20-22000 20-22000

OEM PART

NUMBER

KING PIN KITS

329182 101KK111

TIE ROD ENDS

817018 817019 971714 971715

KING PIN KITS 331434

TIE ROD ENDS

220TR118 220TR119

SPICER

PART

NUMBER

329182 101KK111

817018 817019 971714 971715

331434

220TR118 220TR119

COMMENT

DUAL DRAWKEY SAME SIDE DX BUSHING

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DUAL DRAWKEY OPPOSITE SIDES

LEFT HAND RIGHT HAND

DESCRIPTION

DX BUSHING * D800F/W PRE 9/18/02

PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE

DX BUSHING *

PURGE VALVE PURGE VALVE

PIN SIZE OR TIE

ROD LENGTH

STUD CENTER

TO END

8.07" X 1.35"

6.19"

9.26"

10.06" X 2.04"

12.69"

20-22000

20-22000 20-22000

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

2

KING PIN KITS

331435 TIE ROD ENDS

220TR130 220TR131

331435

220TR130 220TR131

DUAL DRAWKEY SAME SIDE

LEFT HAND RIGHT HAND

DX BUSHING *

PURGE VALVE PURGE VALVE

10.06" X 2.04"

7.50"

HX700-8-2013

Sealed Boot

Patented One Way

Purge Valve

Spicer

®

King Pin Kits & Tie Rod Ends

E-1002l/W, E-1202l/W E-1322l/W, E-1462l/W

For an illustrated parts listing (IPL) of all E Series components, refer to AXIP-0075 on Spicerparts.com

Typical Single Drawkey Kit

MAJOR OEM &

MODEL

INFORMATION

AXLE

RATING

LBS

10-13200 10-13200

10-13200 10-13200 10-13200 10-13200 10-13200 10-13200 10-13200 10-13200

OEM PART

NUMBER

KING PIN KITS

328344 328342

TIE ROD ENDS

817018 817019 970579 970580 970701 970702 818472 818471

DX® Bushings have grease grooves to aid in grease ﬂ ow through bear- ings and to the tapered roller thrust

bearing

SPICER

PART

NUMBER

328344 328342

817018 817019 970579 970580 970701 970702 818472 818471

COMMENT

DX BUSHING * BRONZE BUSHING

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DESCRIPTION

PURGE VALVE PURGE VALVE BOOT STYLE BOOT STYLE BOOT STYLE BOOT STYLE PURGE VALVE PURGE VALVE

PIN SIZE OR TIE

ROD LENGTH

STUD CENTER

TO END

9.06" X 1.79"

6.19"

9.26"

6.00"

7.50"

14600 14600 14600 14600

14600 14600

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside

front cover for details and pictures.

KING PIN KITS

329404 328345 329405 328343

TIE ROD ENDS

818472 818471

329404 328345 329405 328343

818472 818471

DX BUSHING * DX BUSHING * BRONZE BUSHING BRONZE BUSHING

LEFT HAND RIGHT HAND

PRE 2000 AFTER 2000 PRE 2000 AFTER 2000

PURGE VALVE PURGE VALVE

9.06" X 1.87"

7.50"

3

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

DX® Bushings have grease grooves to aid in grease ﬂ ow through bear- ings and to the tapered roller thrust

MAJOR OEM &

MODEL

INFORMATION

bearing

AXLE

RATING

LBS

10-13000 10-13000 10-13000 10-13000

12000 12000

OEM PART

NUMBER

KING PIN KITS 328349 328347 503701 503700

TIE ROD ENDS

817018 817019 818472 818471

KING PIN KITS 328348 328346

Grey DX® 10 bushing adds

Three Times more wear to

king pin operating life.

SPICER

PART

NUMBER

328349 328347 503701 503700

817018 817019 818472 818471

328348 328346

DX BUSHING * BRONZE BUSHING DX10 BUSHING * DX10 BUSHING *

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DX BUSHING * BRONZE BUSHING

COMMENT

Typical Dual Drawkey Kit

DESCRIPTION

TOP DEAD CENTER MOUNTED ADB

PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE

PIN SIZE OR TIE

ROD LENGTH

STUD CENTER

TO END

9.06" X 1.87"

8.66" X 1.87"

6.19"

7.50"

9.06" X 1.72"

12000 12000

13-14600 13-14600 13-14600

13-14600 13-14600 13-14600 13-14600 13-14600 13-14600 13-14600 13-14600

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside

4

front cover for details and pictures.

TIE ROD ENDS

817018 817019

KING PIN KITS

328349 328347 503701

TIE ROD ENDS

817018 817019 971714 971715 818472 818471 971748 971749

817018 817019

328349 328347 503701

817018 817019 971714 971715 818472 818471 971748 971749

LEFT HAND RIGHT HAND

DX BUSHING * BRONZE BUSHING DX10 BUSHING *

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

PURGE VALVE PURGE VALVE

PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE

6.19"

9.06" X 1.87"

6.19"

9.26"

7.50"

14.28"

HX700-8-2013

Spicer

For an illustrated parts listing (IPL) of all EFA Series components, refer to AXIP-0074 on Spicerparts.com

®

King Pin Kits & Tie Rod Ends

MAJOR OEM &

MODEL

INFORMATION

AXLE

RATING

LBS

10-13000

10-13000 10-13000 10-13000 10-13000

12-13000

12-13000 12-13000 12-13000 12-13000

OEM PART

NUMBER

KING PIN KITS 806356 **

TIE ROD ENDS

1009009 1009009 1009009 1009009

KING PIN KITS

806355 TIE ROD ENDS

1009009 1009010 140TR109 140TR110

SPICER

PART

NUMBER

806356

1009009 1009010 140TR109 140TR110

806355

1009009 1009010 140TR109 140TR110

COMMENT

DX BUSHING *

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DX BUSHING *

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DESCRIPTION

BOOT STYLE BOOT STYLE BOOT STYLE BOOT STYLE

PIN SIZE OR TIE

ROD LENGTH

STUD CENTER

TO END

9.12" x 1.625"

8.13"

5.44"

9.12" x 1.625"

8.13"

5.44"

18-24000

18-24000 18-24000

** Discontinued / no longer available

®

* Spicer front cover for details and pictures.

King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside

KING PIN KITS 811525

TIE ROD ENDS 220TR130 220TR131

811525

220TR130 220TR131

DX BUSHING *

LEFT HAND RIGHT HAND

PURGE VALVE PURGE VALVE

9.965" X 1.87"

7.50"

5

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

I100W, I120W, I140W, I160W, I180W, I200W, I220W

For an illustrated parts listing (IPL) of all I Series components, refer to AXIP-0090 on Spicerparts.com

MAJOR OEM &

MODEL

INFORMATION

AXLE

RATING

LBS

6-8000 6-8000

10-12000 10-12000

10-12000 10-12000 10-12000 10-12000 10-12000 10-12000 10-12000 10-12000 10-12000 10-12000 10-12000 10-12000

OEM PART

NUMBER

KING PIN KITS

101KK111 101KK110

TIE ROD ENDS

080TR116 080TR117

KING PIN KITS 120KK100 220KK100

TIE ROD ENDS 140TR111 140TR112 220TR118 220TR119 817018 817019 220TR130 220TR131 140TR142 140TR143 818472 818471

I100SG, I120SG, I130SG, I132SG, I140SG

No Sufﬁ x or SG(Standard), W (Wide)

SPICER

PART

NUMBER

101KK111 101KK110

080TR116 080TR117

120KK100 220KK100

140TR111 140TR112 220TR118 220TR119 817018 817019 220TR130 220TR131 140TR142 140TR143 818472 818471

D DUAL DRAWKEY OPPOSITE SIDES

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

COMMENT

UAL DRAWKEY OPPOSITE SIDES

D SINGLE DRAWKEY

LEFT HAND RIGHT HAND

UAL DRAWKEY OPPOSITE SIDES

DESCRIPTION

DX BUSHING * DX BUSHING *

BOOT STYLE BOOT STYLE

DX BUSHING * DX BUSHING *

PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE

PIN SIZE OR TIE

ROD LENGTH

STUD CENTER

TO END

8.07" X 1.36"

7.97" X 1.36"

11.89"

9.87" X 1.92"

10.94" X 2.05"

9.18"

12.69"

6.19"

7.50"

14.80"

7.50"

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

6

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

MAJOR OEM &

MODEL

INFORMATION

AXLE

RATING

LBS

14-14600 14-14600 14-14600 14-14600

14-14600 14-14600 14-14600 14-14600 14-14600 14-14600 14-14600 14-14600 14-14600 14-14600 14-14600 14-14600

OEM PART

NUMBER

KING PIN KITS

220KK100 120KK102 140KK100 329022

TIE ROD ENDS

140TR111 140TR112 220TR118 220TR119 817018 817019 220TR130 220TR131 140TR142 140TR143 818472 818471

SPICER

PART

NUMBER

220KK100 120KK102 140KK100 329022

140TR111 140TR112 220TR118 220TR119 817018 817019 220TR130 220TR131 140TR142 140TR143 818472 818471

COMMENT

DUAL DRAWKEY OPPOSITE SIDES DUAL DRAWKEY OPP SIDES I120/ 140 DUAL DRAWKEY OPPOSITE SIDES I140W

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DESCRIPTION

DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING *

PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE

PIN SIZE OR TIE

ROD LENGTH

STUD CENTER

TO END

10.94" X 2.05"

10.77" X 1.86"

10.12" X 2.05"

9.18"

12.69"

6.19"

7.50"

14.80"

7.50"

16-22000 16-22000 16-22000 16-22000 16-22000

16-22000 16-22000 16-22000 16-22000 16-22000 16-22000

151KK101 329023 220KK100 161KK100 329116

TIE ROD ENDS

220TR115 220TR116 818472 818471 220TR130 220TR131

151KK101 329023 220KK100 161KK100 329116

220TR115 220TR116 818472 818471 220TR130 220TR131

I160, I180 I160W I180W - I220W MCI BUS I160 NEOPLAN BUS I161

LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND LEFT HAND RIGHT HAND

DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING *

BOOT STYLE BOOT STYLE PURGE VALVE PURGE VALVE PURGE VALVE PURGE VALVE

KING PIN KITS

FOR TECHNICAL SERVICE ASSISTANCE CALL 1- 877-777-5360

For Technical Information reference Dana Spicer® Steer Axle

Service Manual AXSM-0038

10.94" X 2.05"

11.00" X 2.05"

11.00" X 1.79"

5.75"

7.50"

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

7

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

LEFT

HAND

140TR109 220TR115 970701 817018 818472 220TR130 1009009 140TR111 120TR109 971714 970579 080TR116 220TR118

RIGHT

HAND

140TR110 220TR116 970702 817019 818471 220TR131 1009010 140TR112 120TR110 971715 970580 080TR117 220TR119

NOTE

NLA

TIE ROD END

LENGTH

BALL CTR TO

END IN.

5.44

5.75

6.00

6.19

7.50

8.13

9.18

9.26

11.89

12.69

STUD TAPER LENGTH CTR

SOCKET TO

TYPE

ROD

THREAD

THREAD LENGTH

THREADS

Straight Straight Straight Straight Straight Straight Dropped Straight REPLACED BY 140TR111, 140TR112 Dropped

REPLACED BY 971714 & 971715

Dropped Dropped

1.125 - 12 UNF-2A

1.25 - 12 UNF-2A

1.125-12 UNF2B

1 1/8-12 UNF2A

1 1/4-12 UNF2A

1 1/4-12UNF2A

1 1/8-12UNF2A

1 1/4-12 UNF2A

1.375 -12UNF-2A

1 7/8-12UNF-2A

3.44

3.88

4.32

4.09

5.25

3.12

3.43

4.13

3.60

4.75

2.22

2.61 CROSSLINK

OBSOLETE

2.22

2.40

2.61

2.41

2.22

2.47

2.60

TAPER

1.5 per ft 1 to 8 1 to 8 1 to 8 1 to 8 1 to 8 1 to 8 1 to 8

1 to 8 1 to 8 1 to 8 1 to 8

DANA

DESIGN

TYPE

Non Purge Valve Non Purge Valve Non Purge Valve Purge Valve Purge Valve Purge Valve Non Purge Valve Purge Valve Non Purge Valve Purge Valve Non Purge Valve Non Purge Valve Purge Valve

STEER

AXLE

SERIES

I & EFA I E I & D & E I & D & E I & D & EFA EFA I I E E & D I I & D

971748 140TR142 140TR130 140TR114 161TR115

971749 140TR143 140TR131 140TR115 161TR116

NLA NLA

14.28

14.80

15.45

Dropped Dropped REPLACED BY 140TR142, 140TR143

REPLACED BY 140TR142, 140TR143

Dropped

1.625-12UN-2A

1 5/8 -12 UN2A

1.625-12UN2A

4.75

4.55

2.42

2.22

2.61

1.5 to1 ft 1 to 8

1.5 per ft

Purge Valve Purge Valve Non Purge Valve Non Purge Valve Non Purge Valve

E I I I I

Note: For tie rod assemblies, reference the Steer Axle Illustrated Parts List (IPL) located on page 22. Note: Cross tubes are only sold as an assembly with tie rod ends. They are not available separately.

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside

8

front cover for details and pictures.

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

101SC101 101HD101 101HH101 071HP101 HP119-5 HP119-3 080HC100 HH103 819790 HS111 HS112 1460HN100 220HN103

220HC100 220HP100-1 220HP100-2 1460HN100 220HN103 160HS100-1 160HS100-2 160HS100-3 160HH100 1001414 220SC110 971010 971370 160HD105

Knuckle Pin Bushings-DX GARLOCK Seals Drawkeys Inner Drawkeys Outer Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Belleville Washer Drawkey Hex Nut

THRUST BEARING DRAWKEY - INNER DRAW KEY BELLEVILLE WASHER DRAW KEY HEX NUT SHIM SHIM SHIM OIL SEAL GREASE FITTING KINGPIN FOAM INSERT KNUCKLE CAP BRONZE BUSHING

2 4 4 2 2 2 2 4 4 2 2 4 2

2 2 2 8 4 2 2 2 4 4 2 4 4 4

085SC100 101HD101 HS111 HS112 HH103 819790 101HH101 071HP101 1460HN100 220HN103 080HC100

220HC100 220HP100-2 1460HN100 220HN103 160HS100-1 160HS100-2 160HS100-3 160HH100 1001414 220SC112 971010 160HD105 971370

KNUCKLE PIN BUSHING SHIM .005 SHIM .010 RING - O GREASE FITTING OIL SEAL DRAW KEY BELLEVILLE WASHER DRAW KEY HEX NUT THRUST BEARING

THRUST BEARING DRAW KEY BELLEVILLE WASHER DRAW KEY HEX NUT SHIM SHIM SHIM SEAL-OIL GREASE FITTING KINGPIN FOAM INSERT DX BUSHING KNUCKLE CAP

2 4 2 2 4 4 4 4 8 4 2

2 4 8 4 2 2 2 4 4 2 4 4 4

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

9

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

1004783 1004785 1004800 1004801 1004802 1004803 1004804 1008360 1008924 1009304

816239

815284 1320HD100 815237 816239 971011 971370 971010 819790 817493 817494 817492 1004804

SEAL GASKET SHIM (.005) SHIM (.010) SHIM (.015) SHIM (.025) LOCKNUT THRUST BRG DX BUSHING KNUCKLEPIN

DRAW KEY

Knuckle Pin Bushings-Bronze Seals Drawkeys Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Locknut

4 4 4 4 4 4 2 2 4 2

2

2 4 4 2 2 4 4 4 4 2 2 2

1004804 107276S 806333 806334 811523 820518 820587 817492 817493 817494

817452 1460HD100 820518 816239 220HC104 971370 971010 819790 817493 817494 817492 067592

LOCKNUT SEALANT RTV KNUCKLE PIN DX BUSHING THRUST BRG SEAL DRAW KEY SHIM (.030) SHIM (.005) SHIM (.010)

Knuckle Pin Bushings-Bronze Seals Drawkeys Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Locknut

2 1 2 4 2 4 2 2 4 2

2 4 4 2 2 4 4 4 4 2 2 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

10

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

815284 1329HD101 815237 816239 971011 971370 971010 819790 817493 817494 817492 1004804

1320SC100 1320HD100 815237 160HP104-1 160HP104-2 971011 971370 971010 819790 817493 817494 817492 1460HN100 220HN103

Knuckle Pin Bushings-DX Seals Drawkeys Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Locknut

Knuckle Pin Bushings-BRONZE Seals Drawkey Upper Drawkey Lower Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Bellville Washer Drawkey Hex Locknut

2 4 4 2 2 4 4 4 4 2 2 2

2 4 4 2 2 2 4 4 4 4 2 2 8 2

817452 806334 820518 816239 220HC104 971370 971010 819790 817493 817494 817492 067592

1460SC102 1460HD100 820518 160HP104-1 160HP104-2 220HC104 971370 971010 819790 817493 817494 817492 1460HN100 220HN103

Knuckle Pin Bushings-DX Seals Drawkeys Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Locknut

Knuckle Pin Bushings-Bronze Seals Drawkey Upper Drawkey Lower Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Bellville Washer Drawkey Hex Locknut

2 4 4 2 2 4 4 4 4 2 2 2

2 4 4 2 2 2 4 4 4 4 2 2 8 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

11

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

1320SC100 1320HD101 815237 160HP104-1 160HP104-2 971011 971370 971010 819790 817493 817494 817492 1460HN100 220HN103

817452 806334 820518 816239 811523 971370 971010 819790 817493 817494 817492 067592

Knuckle Pin Bushings-Bronze Seals Drawkey Upper Drawkey Lower Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Bellville Washer Drawkey Hex Locknut

Knuckle Pin Bushings-DX Seals Drawkeys Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Locknut

2 4 4 2 2 2 4 4 4 4 2 2 8 2

2 4 4 2 2 4 4 4 4 2 2 2

1460SC102 806334 820518 160HP104-1 160HP104-2 220HC104 971370 971010 819790 817493 817494 817492 1460HN100 220HN103

817452 806334 820518 816239 811523 971370 971010 819790 817493 817494 817492 067592

Knuckle Pin Bushings-DX Seals Drawkey Upper Drawkey Lower Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Bellville Washer Drawkey Hex Locknut

Knuckle Pin Bushings-DX Seals Drawkeys Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Locknut

2 4 4 2 2 2 4 4 4 4 2 2 8 2

2 4 4 2 2 4 4 4 4 2 2 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

12

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

1460SC103 1460HD103 1460HD104 820518 160HP104-1 160HP104-2 220HC104 971370 971010 819790 817493 817494 817492 1460HN100 220HN103

Knuckle Pin (shorter) Bushings-DX10 1.8" Bushings-DX10 1.4" Seals Drawkey Upper Drawkey Lower Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Bellville Washer Drawkey Hex Locknut

2 2 2 4 2 2 2 4 4 4 4 2 2 8 2

1460SC102 1460HD103 820518 160HP104-1 160HP104-2 220HC104 971370 971010 819790 817493 817494 817492 1460HN100 220HN103

Knuckle Pin Bushings-DX10 1.8" Seals Drawkey Upper Drawkey Lower Thrust Bearing Knuckle Cap Foam Insert Grease Fitting Shim .005 Shim .010 Shim .030 Bellville Washer Drawkey Hex Locknut

2 4 4 2 2 2 4 4 4 4 2 2 8 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

13

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

101SC100 101HD102 101HH101 071HP101 080HC100 HH103 819790 HS111 HN173 25522R1

120SC100 120HD102 120HH100 160HP102-2 071HP101 120HC100 220HH102 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner Thrust Bearing O-Rings Grease Fitting Shim .005 Belleville Washer Hex Nut

Knuckle Pin Bushings-DX GARLOCK Seals Drawkeys Inner Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

2 4 4 2 2 4 4 6 4 2

2 4 4 2 2 2 4 4 2 2 2 8 2

101SC101 101HD101 101HH101 071HP101 HP119-5 HP119-3 080HC100 HH103 819790 HS111 HS112 1460HN100 220HN103

140SC100 140HD100-2 140HH100 160HP102-2 071HP101 220HC101 220HH102 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

Knuckle Pin Bushings-DX GARLOCK Seals Drawkeys Inner Drawkeys Outer Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Belleville Washer Drawkey Hex Nut

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

2 4 4 2 2 2 2 4 4 2 2 4 2

2 4 4 2 2 2 4 4 6 2 2 8 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

14

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

160SC100 160HD102 160HH100 160HP102-2 071HP101 220HC100 220HH102 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

161SC100 160HD102 160HH100 160HP102-2 071HP101 220HC100 220HH103 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner-Long Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

2 4 4 2 2 2 4 4 6 2 2 8 2

819790 160HD102 160HH100 160HP102-2 071HP101 220HC100 220HH103 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

220SC108 160HD102 160HH100 220HP100-1 220HP100-2 220HC100 220HH103 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner-Long Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

Knuckle Pin Bushings- DX GARLOCK Seals Drawkeys Inner Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

2 4 4 2 2 2 4 4 6 2 2 8 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

15

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

160SC100 160HD102 160HH100 160HP102-3 071HP101 220HC100 220HH102 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

220SC108 160HD102 160HH100 220HP100-1 220HP100-2 220HC100 220HH103 819790 160HS100-1 160HS100-2 160HS100-3 220HN102 220HN103

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner Drawkey Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

2 4 4 2 2 2 4 4 6 2 2 8 2

220SC108 160HD102 160HH100 220HP100-3 220HP100-2 220HC100 220HH103 819790 160HS100-1 160HS100-2 160HS100-3 1460HN100 220HN103

161SC101 1320HD101 815237

--------

-------971011 220HH103 819790 817493 817494 817492

-------161HN105

Knuckle Pin BUSHINGS DX Seals Drawkey Short Drawkey Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .020 Belleville Washer Drawkey Hex Nut

Knuckle Pin BUSHINGS DX Seals Drawkeys Inner-Long Drawkeys Outer Thrust Bearing O-Rings Grease Fitting Shim .005 Shim .010 Shim .030 Belleville Washer Drawkey Hex Nut

2 4 4 2 2 2 4 4 6 2 2 8 2

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

16

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

Competitive

300218 300257 300258 300267 300268 300271 300272 300274 300276 300277 300278 300283 300294 300295 300297 300298 300303 300304 300305 300306 300307 300308 300319 300320 300322 310215 310216 310222 310222 310223 310285 310286 310395 310396 310424

Brand

DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS

Dana Part

Number

101KK113 806355 806356 811525 101KK111 120KK100 140KK100 806355 120KK100 140KK100 220KK100 329432 329405 817452 328342 120KK102 328346 328348 328347 328349 328343 329404 329182 329022 329023 140TR111 140TR112 140TR109 140TR109 140TR110 1009009 1009010 220TR119 220TR118 220TR115

Competitive

310425 310425 310433 310434 310437 310438 310455 310456 310504 310505 E10107B E10137 E10138 E10148 E11394B E11394B E11785B E11808C E4460B E4616 E4617 E4617TU E4628 E4628 E4629 E4629 E4696B E4696C E6194C E6198B E6856 E6857 E6869C E8757 E8758

Brand

DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS DAYTON PARTS EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID

Dana Part

Number

220TR116 220TR116 820694 820695 080TR116 080TR117 817019 817018 971748 971749 329432 817019 817018 080TR116 328342 328344 220KK100 817452 101KK113 220TR116 220TR115 220TR115 820694 820694 820695 820695 806355 806355 811525 101KK111 220TR119 220TR118 806356 1009009 1009010

Competitive

E9941B E9942B E9942B E9949 E9949 E9951 E9952 FKP101C FKP109B FKP109C FKP110B FKP115B FKP118B FKP118C FKP119B FKP119C FKP131B FKP131C FKP134C FKP139B FKP144B FKP145C FKP75B FKP98C FAK4495 FAK4572 FAK4573 FAK4574 FAK4582 FAK4583 FAK4596 FAK4598 FAK4601 FAK4609 FAK4610

Brand

EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID EUCLID FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLAGG FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE

Dana Part

Number

120KK100 329022 140KK100 140TR109 140TR109 140TR111 140TR112 806356 329432 811525 101KK111 806355 120KK100 120KK100 140KK100 140KK100 328342 328344 120KK102 328346 328347 329182 101KK113 806355 101KK113 806355 806356 811525 101KK111 806355 329432 140KK100 120KK100 220KK100 328342

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

17

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

Competitive

FAK4615 FAK4626 FAK4627 FAK4628 FAK5444 FAK5454 FAK5455 FAK5456 FAK5457 FAK5500 FAK5501 FAK5506 FAK5507 FAK5508 ES2090L ES2091R ES3030R ES3031L ES3204L ES3205R ES3217L ES3218R ES3219L ES3220R ES3297R ES3298L ES3476 ES3477 ES431L ES431R ES800422 ES800423 ES9001L ES9001R

50.101.09

Brand

FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE FLEETRITE INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY INDUSTRY KAISER

Dana Part

Number

120KK102 329182 329022 329023 101KK111 101KK111 120KK100 140KK100 220KK100 328349 328348 328344 328347 328346 820694 820695 220TR119 220TR118 080TR116 080TR117 140TR109 140TR110 140TR111 140TR112 1009010 1009009 817019 817018 220TR115 220TR116 971715 971714 971714 971715 101KK113

Competitive

50.102.09

50.103.19

50.120.05

50.120.09

50.121.05

50.122.05

50.140.19

50.146.05

50.147.05

50.160.19

50.180.05

70.101.09

70.102.09

70.103.19

70.120.05

70.120.09

70.120.95

70.120.99

70.121.05

70.122.05

70.122.95

70.140.19

70.146.05

70.147.05

70.160.19

70.180.05

70.180.05 K101I K101I K102I K103S

Brand

KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER

Dana Part

Number

101KK111 329182 806355 806355 120KK100 806356 328342 140KK100 328345 329405 328347 220KK100 329432 811525 101KK113 101KK111 329182 806355 120KK100 806355 120KK100 806356 328342 328344 140KK100 328345 329405 328347 220KK100 329432 811525 101KK111 101KK113 101KK111 329182

Competitive

K120E K120E K120I K120I K121E K122E K122E K140S K146E K146E K146S K147E K160S K161S K180E K180E A3144C549 A3144D550 A3144F448 A3144G449 A3144J296 A3144K297 R200052 R200250 R200251 R200267 R200268 R200269 R200279 R200281 R200281 R201419 R201426 R201427 R201485

Brand

KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER KAISER MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR

Dana Part

Number

806355 806355 120KK100 120KK100 806356 328342 328344 140KK100 328345 329405 120KK102 328347 220KK100 161KK100 329432 811525 220TR118 220TR119 820695 820694 220TR116 220TR115 101KK113 811525 806356 806355 101KK111 806355 220KK100 328342 328344 817452 120KK100 140KK100 140KK100

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

18

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

Competitive

R201486 R201487 R230070 R230071 R230072 R230073 R230104 R230105 R230139 R230140 R230268 R230415 R230416 R230420 R230421 8001C 8002C 8003C 8004C 8005C 8006C 80070C 80074B 80075C 80076B 80077B, 80078C 8577B 8577C/B 8618C 8631C 8633B 8633C 8637C/B 8647B

Brand

MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MERITOR MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG

Dana Part

Number

120KK100 329182 220TR116 220TR115 820694 820695 220TR119 220TR118 817019 817018 101KK113 140TR111 140TR112 1009010 1009009 329182 329022 329023 328349 328348 120KK102 140KK100 220KK100 220KK100 328342 329405 817452 101KK113 101KK111 806355 806356 329432 811525 101KK111 806355

Competitive

8655B 8655C 8657B ES2090L ES2090L ES2091R ES2091R ES3030R ES3031L ES3204L ES3205R ES3217L ES3217L ES3218R ES3218R ES3219L ES3220R ES3297R ES3298L ES3476 ES3477 ES431L ES431L ES431R ES431R ES800422 ES800423 ES9001L ES9001R 1648204C91 1660271C91 1660271C92 1660271C92 1668411C91 1668411C92

Brand

MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG MOOG NAVISTAR NAVISTAR NAVISTAR NAVISTAR NAVISTAR NAVISTAR

Dana Part

Number

120KK100 120KK100 140KK100 820694 820694 820695 820695 220TR119 220TR118 080TR116 080TR117 140TR109 140TR109 140TR110 140TR110 140TR111 140TR112 1009010 1009009 817019 817018 220TR115 220TR115 220TR116 220TR116 971715 971714 971714 971715 101KK113 101KK111 101KK111 101KK111 120KK100 120KK100

Competitive

1668412C91 1668412C91 1668412C92 1685405C91 473695C91 2692311 2692311 2692312 2692485 2692485 2692486 2692486 2692645 262-1555 262-1585 262-1586 262-1594 262-1603 262-1609 262-1633 262-1635 262-1636 262-1652 262-1653 L20LV8041A13 L20LV8042A13 L20LV8128B18 L20LV8129B18 L20LV8276A12 L20LV8277A12 L20SV8150B16 L20SV8151B16 L24LV8292A12 L24LV8292C12 L24LV8293A12

Brand

NAVISTAR NAVISTAR NAVISTAR NAVISTAR NAVISTAR PERFECT

CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE PERFECT CIRCLE TRW

TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW

Dana Part

Number

140KK100 140KK100 140KK100 220KK100 101KK113 220TR116 220TR116 220TR115 820695 820695 820694 820694 220TR115 101KK113 806355 806356 811525 101KK111 806355 329432 120KK100 140KK100 328342 329405 1009009 1009010 971715 971714 080TR117 080TR116 817019 817018 971749 140TR143 971748

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

19

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

Competitive

L24LV8293C12 L24LV8441A13 L24LV8442A13 L24SV8000C20 L24SV8001D20 L24SV8002C13 L24SV8003C13 L24SV8100B13 L24SV8101C22 L24SV8102C13 L24SV8103C12 L24SV8200B21 L24SV8201J21 L24SV8202D16 L24SV8203B16 L24SV8454A16 L24SV8455A16

TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW TRW

Brand

Dana Part

Number

140TR142 140TR111 140TR112 140TR109 140TR110 140TR109 140TR110 820694 820695 820694 820695 220TR115 220TR116 220TR115 220TR116 220TR119 220TR118

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

20

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

DESCRIPTION

Nut, Draw Key (Single) Nut, Draw Key (Dual) Stop Screw Jam Nut, Stop Screw Nut, Slotted Bolt, Tie Rod Clamp Cap, Knuckle Nut, Outer Spindle Nut, Inner Spindle Nut, Pro-Torque Spindle

DESCRIPTION

Knuckle Capscrew

FASTENER

1/2-20-UNF-2B 3/8-16-UNC-2A 5/8-18-UNF-2A 5/8-18-UNF-3B 7/8-14-UNF-2B 5/8-11-UNC-2A *

2.375-16-UNF-2A

1.5-18-UNEF-2B

FASTENER

-

TORQUE LBs Ft. (Nm)

30-45 (41-61) 24-36 (33-49)

90-120 (122-163) 120-160 (163-217) 45-60 (61-81)** 50-75 (68-102) 100-150 (135-203) see wheel bearing adjustment see wheel bearing adjustment

TORQUE LBs Ft. (Nm)

22-28 (30-38)

SOCKET SIZE

3/4" 6 point 9/16" 6 point 5/8" open end wrench 15/16" open end wrench 15/16" 6 point 15/16" 6 point 15/16" 6 point 2 1/4" 6 point 2 5/8" 6 point 2 1/2" 6 point

NOTATION

Steering and Ackermann Arm Nuts - 12F, 13F Axle Steering and Ackermann Arm Nuts - 18F, 20F, 22T, 24T Axle Wheel Bearing Adjustment Tie Rod End Nut Steering Arm Ball Stud Nut Draw Key Nut Cross Tube Clamp Screw Nut

For Technical Information reference Dana Spicer Steer Axle

-

350-490* (47S-664)

775-1050* (1051-1424)

-

see wheel bearing adjustment 165-230" (224-312) 165-230" (224-312) 30-45 (41-61) 90-120 (122-163)

Service Manual AXSM-0038

NOTE: Torque nut to the range

minimum, then tighten further to align cotter pin hole. Check torque to make sure it does not exceed range maximum. If it does, use a new nut.

®

* Spicer front cover for details and pictures.

King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside

21

Spicer

®

King Pin Kits & Tie Rod Ends

HX700-8-2013

DESCRIPTION

Tie Rod End Nut - (Note 1) Tie Rod Clamp Bolt (Note 3) Steering Arm Nut & Tie Rod Arm Nut (Note 1) Kingpin Draw Key Nut (Note 2) Kingpin Cap Bolts

DESCRIPTION

Tie Rod End Nut (Note 1) Tie Rod Clamp Bolt Steering Arm Nut & Tie Rod

FASTENER

-

FASTENER

-

TORQUE LBs Ft. (Nm)

120-160 (160-218) 45-60 (61-81 ) 450-650 (610-881) 775-1200 (1050-1625) 25-31 (34-42) 17-25 (23-34)

TORQUE LBs Ft. (Nm)

120-160 (160-218) Straight: 45-60 (61-81) Drop: 150-180 (203-244)

NOTATION

NOTE 1: Cotter pin cannot be installed after minimum torque is attained. The nut must be advanced until the cotter pin can be installed. Torque speciﬁ ed is for taper and threads which are clean and oil free.

NOTE 2: Torque to speciﬁ cations. Tap unthreaded end of draw key sharply with a hammer, and re-torque draw key nut to speciﬁ cations.

NOTE 3: Drop tie rod ends: I-120SG and I-140SG = 55-70 lbs. ft. (75-95 Nm). I-200SG, I-200W, & I-220W = 150 - 180 lbs. ft. (203-244 Nm).

NOTATION

-

Arm Nut Kingpin Draw Key Nut Kingpin Cap Bolts

Publication Number

AXIP-0074

AXIP-0075

AXIP-0090

AXSM-0038

AXWP-0403

WESM-0060

-

775-1200 (1050-1625) 24-36 (32.5-49) 65-80 (88-108)

Publication Description / Name

®

Spicer

Steer Axles - Spicer® EFA Family

Spicer® Steer Axles - E Series

Spicer® Steer Axles - D & I Family

Spicer® Steer Axles Service Manual

Spicer® Tie Rod Inspection Procedure

Spicer® Steer and Drive Wheel Ends

Visit www.spicerparts.com to

download these publications

For Technical Information reference Dana Spicer Steer Axle

Service Manual AXSM-0038

-

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

22

HX700-8-2013

Spicer

®

King Pin Kits & Tie Rod Ends

See the “King Pin Kit Contents” section (pages 9-16) for a complete listing of all Spicer

PIN PART NUMBER

806333 815284 815284 817452 817452 817452 817452 1009304 085SC100 101SC100 101SC101 120SC100 1320SC100 1320SC100 140SC100 1460SC102 1460SC102 1460SC102 1460SC103 160SC100 160SC100 161SC100 161SC101 220SC108 220SC108 220SC108 220SC110 220SC112

APPLICATION

EFA E1000I, W E1200I,W E1320I,W E1000I, W E1200I,W E1320I,W E1460I,W E1460I,W E1460I,W E1460I,W EFA D600N,F D700N, D800F,W

D850F,W I SERIES

I SERIES, D SERIES I SERIES E1203 E1203 I SERIES E1002 E1302, E1322, E1462 E1002 E1302, E1322, E1462 E1002 E1302, E1322, E1462 E1002 E1302 I SERIES I SERIES I SERIES I SERIES I SERIES, I-100 - I220 I SERIES I SERIES D2000F (5"DROP) D2200F D2000F (3.5" DROP), D2200F

AXLE RATING

LBS

18-24000 10-13200 10-13200 14600 14600 14600 14600 12-13000 6-8500 6-8000 6-8500 10-12000 12000 12000 14-14600 10-13000 10-13000 10-13000 10-13000 14-14600 14-14600 16-22000 16-22000 10-22000 16-22000 16-22000 20-22000 20-22000

DANA KIT

811525 328344 328342 329404 328345 329405 328343 806355 329182 101KK110 101KK111 120KK100 328348 328346 120KK102 328349 328347 503701 503700 140KK100 329022 161KK100 329116 220KK100 151KK101 329023 331434 331435

BUSHING

TYPE

DX BUSHING * DX BUSHING * BRONZE BUSHING DX BUSHING * DX BUSHING * BRONZE BUSHING BRONZE BUSHING DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * BRONZE BUSHING DX BUSHING * DX BUSHING * BRONZE BUSHING DX10 BUSHING * DX10 BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING * DX BUSHING *

®

King Pin Kits and the components in each kit.

COMMENTS

--

-PRE 2000 AFTER 2000 PRE 2000 AFTER 2000

-DUAL DRAWKEY SAME SIDE SINGLE DRAWKEY DUAL DRAWKEY OPPOSITE

SIDES DUAL DRAWKEY OPPOSITE SIDES

--

-DUAL DRAWKEY OPPOSITE

SIDES I120/ 140

--

-TOP DEAD CTR MOUNTED

ADB DUAL DRAWKEY OPPOSITE SIDES I140W

MCI BUS I160 NEOPLAN BUS I161 DUAL DRAWKEY OPPOSITE

SIDES I160, I180

I160W DUAL DRAWKEY OPPOSITE

SIDES DUAL DRAWKEY SAME SIDE

PIN SIZE

9.965" X 1.87"

9.06" X 1.79"

9.06" X 1.87"

9.12" x 1.625"

8.07" X 1.35"

7.97" X 1.36"

8.07" X 1.36"

9.87" X 1.92"

9.06" X 1.72"

10.77" X 1.86"

9.06" X 1.87"

8.66" X 1.87"

10.12" X 2.05"

11.00" X 2.05"

11.00" X 1.79"

10.94" X 2.05"

10.06" X 2.04"

* Spicer® King Pin Kits that contain Garlock composite DX and DX10 bushings are presized and do not require reaming. Please see the inside front cover for details and pictures.

23

Dana Aftermarket Group

PO Box 321 Toledo, Ohio 43697-0321

Warehouse Distributors: 1.800.621.8084 OE Dealers: 1.877.777.5360

www.spicerparts.com