Kinetik LMS6 User Manual
By Paul Aylett at 3:58 pm, Jul 16, 2012
User Manual
Contents
Introduction
Parts
General Warnings and Safety
Using the Love My Skin Anti Ageing Pen 6
Battery information
Specification
Troubleshooting
Frequently Asked Questions
Maintenance and Cautions
Cleaning
Warranty
Explanation of Symbols on Unit
2
3
4
5 - 6
7
8
9
10 - 15
16
16
17
18
1
Introduction
Thank you for purchasing the Love My Skin Anti Ageing Pen 6, a revolution in
reducing fine lines and wrinkles.
Love My Skin Anti Ageing Pen 6 uses scientifically proven technology to help
reduce fine lines and wrinkles through the Active Cell Regeneration of red light
which stimulates collagen, making the skin look and feel smoother, more toned
and visibly younger.
Use it only three times a day for 1 minute to start seeing results.
IMPORTANT: PLEASE KEEP THIS USER MANUAL FOR FUTURE REFERENCE
Tested and approved by THOR.
THOR products are used by therapists
to British Olympic Teams.
2
Parts
Protective
cover
ON/OFF
button
Illumination Area
(Phototherapy LEDs)
Battery cover
Bottom of unit
Battery cover lock
3
General Warnings and Safety
Notice:
• This is not a toy, do not look directly into the LEDs, even when using optical
protection (for example sunglasses)
• Do not use if your eyes are sensitive – anyone with (or suspected of having)
photosensitive epilepsy should consult a healthcare professional before use
Warnings:
• Children under 12 years of age must be supervised by an adult when using this
product
• Not suitable for people with pacemakers or other implanted medical devices
• Avoid using the device in the vicinity of flammable or anaesthetic gases
• Do not use the device if you are connected to, or in the vicinity of high-frequency
surgical or industrial equipment
• Do not use the device in the direct vicinity of short-wave or microwave equipment
• Do not shine directly into the eyes of other people or animals
• Do not use when pregnant or breast feeding
4
Using the Love My Skin Anti Ageing Pen 6
1. Ensure that the area to be treated is cleaned before use.
2. Remove the protective cover and press and hold the ON/OFF button for 2
seconds to turn the unit on. The unit will emit a beep while in use, showing that
the device is working properly.
3. Gently place the illumination area on to the skin (for the most effective results, the
illumination area must touch the skin at all times). Keep the illumination area in
place until the 1 minute treatment cycle has ended.
4. Once the treatment cycle has ended, the unit will automatically switch off. Clean
the illumination area with an alcohol wipe and replace the protective cover. Do
not immerse the unit in water.
2 sec
For best results, do not exceed 1 treatment cycle in the same area in any 1 hour
period. If you have multiple areas to treat, treat each area for 1 minute then move to
the next affected area.
1 min
1 min later
5
Loading...