KineticoPRO SMF SteamerGUARD 7500, SMF SteamGuard 7500 Specifications

Ver. I, Aug 2010 JN
Filter Media
Hollow Carbon & Ceramic Filter Media
Housing
polypropylene
Head
Proprietary reinforced nylon
Model
Maximum Dimensions
Micron Rating
Initial ΔP (psi) at Flow Rate (gpm)
Chlorine Reduction & Scale Control at Flow rate (gpm)
Temperature Rating
SMF SteamGuard 7500
14” x 9” x 19”
1.0
1-5 psi @ 1 gpm @ 60 psi
7,500 gallons @ 1 gpm 28,388 liters @ 3.79 Lpm
40°F to 100°F
Substance
Influent Challenge
Concentration
Reduction
Requirement
Maximum Permissible Product Water
Concentration mg/L
Actual Reduction
Percentage
Chlorine
2.0 mg/L ± 10%
50%
1.0
99%
Cartridge Specifications and Performance Data
Materials of Construction
Test Parameters
Features:
Ceramic Matrix with Ultra High Porosity Carbon
NanoZINC Technology
Nylon construction withstands high pressure
Modular filter design for up to 80% less installation time!
40 times more dirt holding capacity than conventional
carbon block filters and other polypropylene sediment filters!
30 times the chloramine reduction of a conventional
carbon block
1
st
Jumbo Sanitary Filter on market
Benefits:
No pre filter required
One filter can do it all!!!!
Dirt, Chemical and Chloramines reduction
Low pressure drop
Specified to:
Inhibit scale build up
Reduce Maintenance on steam generators
Minimize under-cooked food caused by lack of steam
volume
Reduce pitting and corrosion of equipment
Reduce sediment, chlorine, chloramine and alkalinity, bad
taste and odors, total organic compounds, tannins and trihalomethanes
Applications:
Steamers and Combi-ovens
Not Flash steamers units
SMF SteamerGUARD 7500 hardware has been independently tested against NSF/ANSI Std. 42 Do not use with water that is microbiologically unsafe or of unknown quality
3980 Lakefield Court Suwanee, GA 30024 USA
P: 678-475-0799 800-635-4017 F: 678-475-9126 800-811-7682
www.selectoinc.com
System Part #: 81-1600 Replacement Cartridge #: 108-600
Loading...