Kinemetrics Q330S Datasheet

QUANTERRA

Q330S

VERY LOW-POWER HIGH-RESOLUTION

The Q330S is an advanced 3 or 6 channel broad-band, high
resolution ultra-low-power seismic system incorporating
Quanterra’s proven IP networking technology and super
rugged USB  ash recording. The Q330 uses Quanterra’s
exclusive patented (US Patent 4866442, Japan Patent
2787445, others pending) delta-sigma 24-bit A/D with DSP,
and includes 32Mb RAM, GPS receiver, USB recording,
power management, sensor command/control, and an
advanced telemetry application for reliable data delivery.

Streamlined Remote Administration

The Q330S is designed for simple network maintenance and
administration, before, during, and after deployment. Internet
security is built-in. Proven UDP and TCP communications
modes are standard.

Telemetry…and Local USB Recordiing

The Q330S supports real-time data telemetry to multiple
central sites and simultaneous local recording on rugged USB
 ash media. The peerless performance of the Quanterra Q330
in the IRIS/USArray program has established an
unchallenged reputation for delivery of high quality data.

Rugged USB Media - MSEED

FDSN-standard MSEED recorded on dual USB media. The
media are housed in a rugged watertight compartment.

SPECIFICATIONS

INTEGRATED SEISMIC SYSTEM

FEATURES

Low! Power

Incorporating the latest low-power technology, the Q330S
achieves integrated capability with an average power
requirement of <0.75W, including recorder & GPS!

Internet-Ready Industry Standards

The ultra-reliable Q330S telemetry protocols have been
proven in thousands of world-wide installations, and enable
the use of o -the-shelf IP equipment and service providors.
Dual Ethernet interfaces 10BaseT and 100BaseT are built-in.
Data recorded on local media may be accessed using simple
standard protocols including HTTP, FTP, and SSH.

Comprehensive Sensor Control

The Q330S is a seismological instrument, not a digitizer
alone. Sensor control interface, including advanced sensor
calibration, and sensor identi cation-tag support is built in.

Channels 3- or 6-channel

Dynamic Range 132-135 dB wideband RMS typical

Typical band-limited 136 dB

Format 2-bit integer, Level 2 compressed

1-second packets

Input Range 40V P-P at gain=1

Gain Selectable per channel: 1,30

Filtering Linear or Minimum Phase FIR.

Sample Rate 200, 100, 50, 40, 20, 10, 1

Other rates available.

Time Base Precision TCXO, locked to GPS.

No adjustment.

DSP/CPU ADSP-2189M & EP9302

Telemetry Full Duplex, e cient positive

acknowledge with error control. UDP
or TCP IP over Ethernet.
Burst or continuous. Operates with
major application software.

Temperature Fully speci ed -20 to +50C

Operative -40 to +70C

USA - 222 Vista Ave., Pasadena, CA 91107
Tel [phone] I Fax [phone]

Switzerland - Z.I. Le Tresi 6B, 1028 Preverenges
Tel [phone] I www.kinemetrics.com

Continued

QUANTERRA

SPECIFICATIONS

Operational Temp, DC voltage, GPS status, Sensor

boom position (6 chan)

Memory 32Mb RAM standard

Network Dual Ethernet (10BT & 10/100BT)

Full IP Protocol Stack (Linux)

Serial Ports 1 console ports up to 115kbaud.

Media Dual USB up to 32G total, failover.

-40 +70 rated media available.

Wireless IrDA interface supported.

Power <0.6 W avg. 12VDC 3-channel

<0.8 W avg. 12VDC 6-channel
Add 1.2W for continuous operation.
Other dynamic dependencies.

Physical Sealed, Aluminum, 17 X 4 X 6 in., 9

lbs., Rubber endcaps, Externally
visible status and fault indicators.

USA- 325 Ayer Rd. Harvard, MA
Tel [phone] I www.kinemetrics.com

10-29-13