kincrome K7645 Operation Manual

TOOL TROLLEY 5 DRAWER

Part No. K7645

4 x Hex 5mm Bolts
for Trolley Handle

Castors (2)

Non-Locking Castors (2)

Castors

13mm x 16 Bolts

Castors

(16) for Castors

Castors (2)

Trolley Handle x 1 Keys x 2

6 x Liners

Locking Castors (2)

Gas Struts (2)

TOOLS & ASSISTANCE NEEDED

2 People

13mm Spanner 5mm Hex Key

1

Step 1: Assembly Preparation

Remove all contents from box. Reference the parts list to
make sure you have all the parts.

Place a cover on the floor to prevent any damage to surface of the Trolley.

Castors are prefitted on large trolleys.

Step 2: Attaching Castors

Using two people, tip the trolley so it is laying drawer side up.
Align holes in locking and non-locking Castors with matching
holes in the bottom tray as shown in figure 2. Attach using
13mm x 16 Hex bolts, lock washers and flat washers from
Castor bolt kit and tighten.

TOOL TROLLEY 5 DRAWER

Part No. K7645

Ensure that both locking Castors are on same end of the Trolley.
We suggest mounting locking Castors at the Handle side of the Trolley.

Step 3: Attaching the Side Handle

Align the mounting holes of the handle brackets with the holes
in the side of the Trolley. Attach using the Hex Bolts

READ CAREFULLY BEFORE USE:

Pt1. Using the manual drawer retention system requires users
to close all drawers until it clicks into the closed position.
Pt2. Locking: ensure all drawers are in the closed position.
Drawers will not lock if they are not closed correctly.
Pt3. For any issues regarding locking/closing this toolbox please
call Kincrome on 1300 657 528.

Ensure drawers are fully closed prior to closing lid and locking the chest

2

1 & 2

National Head Office

National Distribution and Showroom

3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia

E [e-mail]
W kincrome.com.au

Administration
T [phone] F [phone]

ABN 41 007 185 006

Customer Service Centre
T 1300 657 528 F 1300 556 005

E [e-mail]
W kincrome.com.au

7

8

6

TOOL TROLLEY 5 DRAWER

Part No. K7645

3

5

4

9

REPLACEMENT PARTS

ITEM PART NO. DESCRIPTION QUANTITY

1 K7778 Lock & Key 1

2 K7779 Key Only (Specify Number) 1

3 K7645-3 Trolley Handle 1

4 K7645-4 Ball Bearing Slide (Pair) 2

5 K7645-5 Alum Drawer Grip (Large) 1

6 K7645-6 Eva Mat Pack 6 Pce 6

7 K7645-7 Large Drawer (Shallow) 1

8 K7645-8 Large Drawer (Deep) 1

9 K7645-9 Castor Fixed x 1 1

10 K7645-10 Castor Swivel x 1 (Brake) 1

11

10

ITEM PART NO. DESCRIPTION QUANTITY

11

K7645-11 Castor Bolt Pack

Folding Side Shelf

Eva Mat Pack (9)

1

3

Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China

Kincrome UK Ltd PO Box 468 Southampton SO30 9EP

Australia & Global UK & EU

www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]