kincrome K12112 Owner's Assembly And Operating Manual

ADJUSTABLE DRAIN PAN HOLDER

K12112

To suit high lift hydraulic transmission jack K12110

Distributed by Kincrome Group www.kincrome.com.au

Owner’s Assembly and Operating Manual

IMPORTANT SAFETY INFORMATION

The use of An oil drain pan on a transmission jack has inherent dangers to avoid risk of personal injury or
property damage make sure you are fully aware of the operating instructions for this prod uct , the
recommendations in the vehicle owners manual prior to using this t ool. This Transmission jack is intended
for automotive use only. Be aware that oil may be hot and mobile transmissions may become unstable if
moved quickly or on uneven ground.

UNP ACKING AND ASSEMBLING JACK

Unpacking Carton

Place carton in a clear, open area such as garage floor. Remove frame, leggs, and bolts from carton.

Assembly

Oil drain pan holder requires the legs x4 to be bolted to the four arm of the drain p an Holder. The arms should
hold the drain pan firmly. Once the oil drain pan holder is asse m bl ed it c an be placed on the transmission
jack in place of lifting fork (supplied with jack).

OPERATING JACK

After successful asse m bly of the oil drain pan holder and installation of t he holder onto the transmission jack,
be sure to follow instructio n for t r ansmission jack.

Caution: the oil drain pan being held may contain hot oil, any r apid movements, lower too quickly, movement,
or movement on uneven ground may cause the oil to spill. Please use extreme caution and care