kincrome Contour K7747 Operation Manual

TOOL TROLLEY 7 DRAWER

Part No. K7747

1

Castors (2)

Castors (2)

Castors

Gas Struts (2)

13mm Spanner Hex Key

7 x Liners

Castors (2)

Castors (2)

Castors

8 x Hex Bolts for
Push Handle

13mm x 16 Bolts
(16) for Castors

2

Castors

TOOL TROLLEY 7 DRAWER

Part No. K7747

Castors

Trolley. Attach using the Hex Bolts.

Step 3: Attaching the Side Handles

Using two people, tip the cart so it is laying drawer side up.
Align holes in locking and non-locking Castors with matching
holes in the bottom tray as shown in Figure 2. Attach using
13mm x 16 Hex bolts, lock washers and flat washers from
Castors bolt kit and tighten.

Place a cover on the floor to prevent damage to the surface
of the Trolley.

Ensure that both locking Castors are on the same end of the
Trolley. We suggest mounting locking castors at the front of
the Trolley.