kincrome 2390PSI User Manual

PRESSURE
WASHER
2390PSI MAX

3 QUICK
CONNECT
CLEANING

NOZZLES

2390PSI

MAX

PRESSURE

POWERFUL

2000W

MOTOR

DRAWS

WATER FROM

BUCKETS &

WATER TANKS

KP1702

ED1 March 16
Original Instructions

Kincrome Tools & Equipment, 3 Lakeview Drive, Carribean Business Park, Scoresby, VIC 3178, Australia

1

PRESSURE WASHER 2390PSI

Table of Contents

Know Your Product ...................................................................................................1

General Safety Instructions .....................................................................................2

Additional Safety Instructions ..................................................................................3-4

Assembly ...................................................................................................................4

Operation ...................................................................................................................5

Trouble Shooting & Spare Parts ..............................................................................11-12

Warranty ....................................................................................................................12

1. Hose Reel Foldable Handle

2. High Pressure Hose & Reel

3. Carry Handle

4. Telescopic Easy Move Handle

5. On Board Gun & Lance Storage
5A. Quick Connect Nozzle Storage

6. High Pressure Hose Outlet

7. ON/OFF Switch

8. Water Inlet Connector

9. Power Cord Holder

10. Power Cord

11. Detergent Dispenser (Built In)

12. Wheels

13. Trigger

14. High Pressure Gun

15. Quick Connect Lance

16. Black Chemical Detergent Nozzle

17. Red 0° Pinpoint Jet

18. Green 25° Fan Spray

19. Hose Adaptor

20. Turbo Nozzle

21. Nozzle Cleaning Pin

Part No: ............................................................................................................................... KP1702

Description: .......................................................................................................................Pressure Washer 2390psi (max)

Rated Power: ..................................................................................................................... 2000W

Rated Pressure: ................................................................................................................. 110bar / 11MPa/ 1595psi

Max Pressure: .................................................................................................................... 165bar / 16.5MPa/ 2390psi

Flow Rate: ........................................................................................................................... 378l/h or 6.3l/m

High Pressure Hose Length: ............................................................................................ 5 meters

Maximum Input Temp: ......................................................................................................5-50°C (41°F - 122°F)

Motor Type: ......................................................................................................................... Induction Motor

Pump Construction: ........................................................................................................... Aluminium Pump Housing

Autostop Function: .............................................................................................................Yes

Power Cord Length: ........................................................................................................... 5meters

Sound dB Rating: ............................................................................................................... 95dB

Weight: ................................................................................................................................ 15.00kg

Power Supply Voltage: ...................................................................................................... 240V

Frequency: ......................................................................................................................... 50Hz

Max Pressure Water Supply: ............................................................................................ 0.4MPa (4 Bar)

Vibration: ............................................................................................................................ <2.5m/s

2

1

Know Your Product

2

3

4

5

6

5A

7

8

9

10

11

12

14

13

15

16

17

18

19

20

21

2

General Safety Warnings

Save all warnings and instructions for future reference.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in serious injury.

1) Work Area Safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

d) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.

e) Children should be supervised to ensure that they do not plat with the appliance.

2) Electrical Safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat,

oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of

an RCD reduces the risk of electric shock.

3) Personal Safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while

you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that
have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-related hazards.

3

PRESSURE WASHER 2390PSI

4) Power Tool Use And Care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that

may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and

are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working

conditions and the work to be performed. Use of the power tool for operations different from those intended could result in

a hazardous situation.

h) The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the

voltage on the rating plate.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

Additional Safety Instructions for Pressure Washers

a) High pressure jets can be dangerous if subject to misuse. The jet must not be directed at animals, persons, live electrical equipment or

the machine itself.

b) Never put your hand, fingers or body directly in front of the spray nozzle.
c) Keep pets, children and bystanders a safe distance away from your work area. A minimum of 15m is recommended
d) Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
e) Risk of explosion – Do not spray flammable liquids.
f) High pressure cleaners shall not be used by children or untrained personnel.
g) High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings

recommended by the manufacturer.

h) To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
i) Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses,

trigger gun.

j) Do not operate the product while under the influence of drugs, alcohol, or any medication.
k) Only operate the tool during broad daylight or with adequate artificial light.
l) Never clean sensitive surfaces or parts like motors or bearings. The high-pressure jet will damage sensitive parts or water will

penetrate where it should not.

m) Never connect the high-pressure cleaner to a drinking water mains without backflow prevention.
n) Please notice the danger of the kickback force and the sudden torque on the spray assembly when opening the trigger gun.
o) Proper use of pressure switch and never use the machine when exceed ultimate pressure.
p) The electric supply connection shall be made by a qualified electrician and comply with IEC60364-1. It is recommended that the electric

supply to this machine should include either a residual current device that will interrupt the supply if the leakage current to earth
exceeds 30 mA for 30 ms or a device that will prove the earth circuit.

q) This machine has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other

cleaning agents or chemicals may adversely affect the safety of the machine.
r) Do not use the machine within range of persons unless they wear protective clothing.
s) Water that has flowed through backflow preventers is considered to be non-potable.
t) Remove the plug from the socket-outlet during cleaning or maintenance and when replacing parts or converting the machine to

another function.

u) Ensure that any exhaust emissions are not in the vicinity of air intakes.

4

Electrical Safety

Caution: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through

an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

a) Inadequate extension cords can be dangerous. If an extension cord is used, it shall be suitable for outdoor use, and the

connection has to be kept dry and off the ground. It is recommended that this is accomplished by means of a cord reel
which keeps the socket at least 60 mm above the ground. Always use an approved extension lead suitable for the power
input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if
damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.

b) Always switch off the mains disconnecting switch when leaving the machine unattended.

c) Never touch the mains plug and the socket with wet hands or use the appliance in the rain.

Description of Symbols

The following symbols could be shown on the tool:

Read the instruction manual before
use. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.

Risk of Explosion

Wear Ear Protection Wear Eye Protection

PSI

Pounds per square inch of pressure High-pressure water can be dangerous if used

incorrectly. High- pressure water jets must not
be directed at people, electrical equipment or the
washer itself.

Warning Water that has passed through the backflow valve

cannot be used for drinking.

~

Alternating Current

V

Volts

A

Amps

Hz

Hertz

W

Watts

kg

Kilograms

MPa

Megapascals Machine not suitable for connection to the potable

water mains

9) Unpacking

Unpack all the components from the box.

When unpacking the KP1702 Pressure Washer, carefully inspect for any damage that may have occurred during transit.

Check for loose parts, missing parts or damaged parts.

1. Ensure all packaging materials are disposed of as per your local council guide lines.