How it Works
Kimo
Loading...
KISTOCK 320 Series
User Manual
20 pgs1.39 Mb0

Kimo KISTOCK 320 Series, KISTOCK KP 320, KISTOCK KT 320, KISTOCK KCC 320, KISTOCK KTT 320 User Manual

...
Download
Class 320 KISTOCK
KT 320 / KCC 320 / KP 320-321
KPA 320 / KTT 320
USER MANUAL
Table of contents
1 Safety instructions.........................................................................................................................................................4
2 Presentation of the device.............................................................................................................................................5
3 Technical features.......................................................................................................................................................... 7
3.6.1 Devices....................................................................................................................................................... 11
3.6.2 Wall mount (in option).................................................................................................................................11
4 Use of the device........................................................................................................................................................ 12
4.3.1 Groups organisation....................................................................................................................................15
4.3.2 Measurements scroll....................................................................................................................................15
5 Bluetooth® function.................................................................................................................................................... 17
6 Maintenance............................................................................................................................................................... 17
7 Calibration.................................................................................................................................................................. 18
7.1 KCC 320: perform a CO2 measurement verification...............................................................................................18
8 Accessories................................................................................................................................................................. 19
9 Troubleshooting...........................................................................................................................................................19
1 Safety instructions
1.1 Precautions for use
Please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
1.2 Symbols used
For your safety and in order to avoid any damage of the device, please follow the procedure described in this user manual and read carefully the notes preceded by the following symbol:
The following symbol will also be used in this user manual: Please read carefully the information notes indicated after this symbol.
4
Safety instructions
2 Presentation of the device
2.1 Use
The KISTOCK class 320 dataloggers allow the measurement of several parameters:
• KT 320: internal measurement of temperature with two universal inputs for probe
• KCC 320: internal measurement of temperature, humidity, atmospheric pressure and CO
2
• KP 320 – KP 321: internal measurement of differential pressure with two measuring ranges
• KPA 320: internal measurement of temperature, hygrometry and atmospheric pressure
• KTT 320: model with four thermocouple inputs
Communication between device and PC is carried out with a USB cable with a micro-USB female connector.
The low-energy Bluetooth® communication (possibility to deactivate this function) allows to communicate with smartphones and tablets, working with Android and IOS.
2.2 Applications
The KISTOCK dataloggers are ideal for different parameters surveillance (temperature, hygrometry, light, current, voltage, impulsion, relative pressure…). They ensure the traceability in the food industry environment as well as they validate the proper functioning of industrial installations.
2.3 References
Device
referenceDisplay
Internal sensors External sensors
Parameters
Number of
recording points
Number Type
Numbe
r
Type
KT 320
Yes
1 Temperature 2
Inputs for SMART
PLUG* probes
Temperature, hygrometry,
current, voltage, impulsion
2 000 000
KCC 320 4
Temperature, hygrometry,
atmospheric pressure,
CO
2
-
Temperature, hygrometry,
atmospheric pressure, CO
2
KP 320 KP 321
1 Differential pressure Differential pressure
KPA 320 3
Temperature, hygrometry,
atmospheric pressure
Temperature, hygrometry,
atmospheric pressure
KTT 320 - 4
Inputs for
thermocouple
probes
Temperature
* Input which allows to plug different compatible SMART PLUG probes: see optional probes and cables page 10.
Presentation of the device
5
2.4 Description of the device
2.5 Description of keys
OK key: allows to start or stop the dataset or change of scrolling group, see page 13.
Selection key: allows the functions scroll, see page 13.
2.6 Description of LEDs
2.7 Connections
The communication between the device and the computer is carried out via an USB cable and with the female micro-USB connector.
2.8 Mounting
The class 320 KISTOCK has magnetic mountings, so you can fix it easily.
6
Presentation of the device
“Selection” key
“OK” key
Micro-USB connector
KT 320: 2 mini-DIN
connections
KCC 320 and
KPA 320
KP 320 and KP 321: 2 pressure
connections
KTT 320: 4 mini-thermocouple
connections
Alarm LED
Operating LED
Alarm LED
Operating LED
Magnetic mountings
Display
3 Technical features
3.1 Technical features of the devices
KT 320 KTT 320
Units displayed
°C, °F, °Ctd, °Ftd, %RH, mV, V, mA, A
Programmed and free units are also
available1 (see table page 9)
°C, °F
Resolution
0.1°C, 0.1°F, 0.1%RH, 1 mV, 0.001 V,
0.001 mA, 0.1 A
0.1°C, 0.1°F
External input
Female micro-USB connector
Input for probe
2 SMART PLUG2 inputs
4 inputs for thermocouple probes
(K, J, T, N, S)
Internal sensor
Temperature -
Type of sensor
CTN Thermocouple
Measuring range
Measuring range of the internal sensor3:
From -40 to +70°C
K: from -200 to +1300°C
J: from -100 to +750°C T: from -200 to +400°C
N: from -200 to +1300°C
S: from 0 to 1760°C
Accuracy
4
±0.4°C from -20 to 70°C
±0.8°C below -20°C
K, J, T, N: ±0.4°C from 0 to 1300°C
±(0.3% of the reading +0.4°C) below 0°C
S: ±0.6°C
Setpoints alarm
2 setpoint alarms on each channel
Frequency of measurements
From 1 second to 24 hours
Operating temperature
From -40 to +70°C From -20 to 70°C
Storage temperature
From -40 to +85°C
Battery life
7 years
5
European directives
2011/65EU RoHS II; 2012/19/EU WEEE; 2014/30/EU EMC; 2014/35/EU
1
Some units are available only with optional probes.
2
Input which allows to plug different SMART PLUG compatible probes: see optional probes and cables page 10.
3
Other measuring ranges are available according to the connected probe: see optional probes and cables page 10.
4
All accuracies indicated in this document were stated in laboratory conditions and can be guaranteed for measurement carried out in the same conditions, or carried out with calibration
compensation.
5
On the basis of 1 measurement each 15 minutes at 25°C.
Technical features
7
KCC 320 KPA 320
Units displayed
°C, °F, %RH, hPa, ppm °C, °F, %RH, hPa
Resolution
0.1°C, 1 ppm, 0.1%RH, 1 hPa 0.1°C, 0.1%RH, 1hPa
External input
Micro-USB female connector
Input for probe
- -
Internal sensor
Hygrometry, temperature, atmospheric pressure,
CO
2
Hygrometry, temperature, atmospheric pressure
Tolerated overpressure
- 1260 hPa
Type of sensor
Temperature and hygrometry: capacitive
Atmospheric pressure: piezo-resistive
CO2: NDIR
Temperature and hygrometry: cpacitive
Atmospheric pressure: piezo-resistive
Measuring range
Temperature: from -20 to 70°C
Hygrometry: from 0 to 100%RH
Atmospheric pressure: from 800 to 1100 hPa
CO2: from 0 to 5000 ppm
Temperature: from -20 to 70°C
Hygrometry: from 0 to 100%RH
Atmospheric pressure: from 800 to 1100 hPa
Accuracy*
Temperature: ±0.4°C from 0 to 50°C
±0.8°C below 0°C or above 50°C
Humidity**: ±2%RH
from 5 to 95%, 15 to 25°C
Atm. pressure: ±3 hPa
CO2: ±50 ppm ±3% of the reading
Temperature: ±0.4°C from 0 to 50°C
±0.8°C below 0°C or above 50°C
Humidity**: ±2%RH
from 5 to 95%, 15 to 25°C
Atm. pressure: ±3 hPa
Setpoints alarm
2 setpoint alarms on each channel
Frequency of measurements
From 1 minute to 24 hours
(15 sec in on-line mode)
From 1 second to 24 hours
Operating temperature
From 0 to +50°C
Storage temperature
From -40 to +85°C
Battery life
3 years*** 7 years***
European directives
2011/65EU RoHS II; 2012/19/EU WEEE; 2014/30/EU EMC; 2014/35/EU
* All accuracies indicated in this document were stated in laboratory conditions and can be guaranteed for measurement carried out in the same conditions, or carried out with calibration compensation. ** Factory calibration uncertainty: ±0.88%RH. Temperature dependence: ±0.04 x (T-20) %RH (if T<15°C or T>25°C) *** On the basis of 1 measurement each 15 minutes at 25°C.
8
Technical features
KP 320 KP 321
Units displayed
Pa
Measuring range
±1000 Pa ±10000 Pa
Resolution
1 Pa
Accuracy*
±0.5% of the reading ±3 Pa ±0.5% of the reading ±30 Pa
Tolerated overpressure
21 000 Pa 69 000 Pa
External input
Micro-USB female connector
Input for probe
2 pressure connections
Internal sensor
Differential pressure
Setpoints alarm
2 setpoint alarms on each channel
Frequency of measurement
From 1 second to 24 hours
Operating temperature
From 5 to +50°C
Storage temperature
From -40 to 85°C
Battery life 7 years** European directives
2011/65EU RoHS II; 2012/19/EU WEEE; 2014/30/EU EMC; 2014/35/EU
* All accuracies indicated in this document were stated in laboratory conditions and can be guaranteed for measurement carried out in the same conditions, or carried out with calibration compensation. ** On the basis of 1 measurement each 15 minutes at 25°C.
3.2 Programmed units
The available programmed units for the KT 320 and KTT 320 KISTOCK are the following:
• m/s
• fpm
• m³/s
• °C
• °F
• %HR
• K
• PSI
• Pa
• mmH2O
• inWg
• kPa
• mmHg
• mbar
• g/Kg
• bar
• hPa
• daPa
• °Ctd
• °Ftd
• °Ctw
• °Ftw
• kj/kg
• mA
• A
• mV
• V
• Hz
• tr/min
• rpm
• ppm
3.3 Free units
For the free units creation, please see the KILOG software user manual.
3.4 Features of the housing
Dimensions 110.2 x 79 x 35.4 mm
Weight KT 320, KCC 320, KP 320, KP 321: 206 g. KTT 320 and KPA 320: 200 g.
Display
2 lines LCD screen. Screen size: 49.5 x 45 mm 2 indication LEDS (red and green)
Control
1 OK key 1 Selection key
Material
Compatible with food industry environment ABS housing
Protection
IP65: KT 320, KP 320 and KP 321* IP 54: KTT 320** IP40: KCC 320 and KPA 320
PC communication
Micro-USB female connector USB cable
Battery power supply 2 double AA lithium 3.6 V batteries
Environmental conditions of use
Air and neutral gases Hygrometry: en conditions de non-condensation Altitude: 2000 m
Technical features
9
* With the pressure connectors plugged for KP 320 and KP 321. ** With all the thermocouple probes connected.
3.5 Features of optional probes
Reference Description Measuring range
External or ambient thermo-hygrometric probes
KITHA Interchangeable hygrometry and ambient temperature probe Hygrometry: from 0 to 100%HR
Temperature: from -20 to +70°CKITHP-130 Remote interchangeable hygrometry and temperature probe
KITHI-150 Remote interchangeable hygrometry and temperature probe
Hygrometry: from 0 to 100%HR Temperature: from -40 to +180°C
General use or insertion Pt 100 temperature probes
KIRGA-50 / KIRGA­150
IP65 immersion probe (50 or 150 mm)
From -40 to +120°C KIRAM-150 Ambient probe 150 mm KIRPA-150 Penetration probe IP65
From -50 to +250°C
KIPI3-150-E IP68 penetration probe with handle KITI3-100-E IP68 penetration probe with T-handle KITBI3-100-E IP68 penetration probe with corkscrew handle KIRV-320 Velcro probe From -20 to +90°C
KICA-320 Smart adapter for Pt100 probe
From -200 to +600°C according to
the probe
Input current, voltage and impulsion cables
KICT Voltage input cable 0-5 V or 0-10 V KICC Current input cable 0-20 mA or 4-20 mA
KICI Pulse input cable
Maximal voltage: 5 V
Type of input: TTL frequency counting
Maximal frequency: 10 kHz
Maximum number of recordable
points:
20 000 points
Clamp-on ammeters
KIPID-50
Ammeter clamp from 0 to 50 A, frequency range from 40 to 5000 Hz
From 0 to 50 A
AC
KIPID-100
Ammeter clamp from 0 to 100 A, frequency range from 40 to 5000 Hz
From 1 to 100 A
AC
KIPID-200
Ammeter clamp from 0 to 200 A, frequency range from 40 to 5000 Hz
From 1 to 200 A
AC
KIPID-600
Ammeter clamp from 0 to 600 A, frequency range from 40 to 5000 Hz
From 1 to 600 A
AC
Thermocouple probes
All the thermocouple temperature probes for the KTT 320 KISTOCK have a class 1 sensitive element as per IEC 584-1, 2 and 3 standards. For more details about the available thermocouple probes, please see the ''Thermocouple probes'' datasheet.
For more details, please see the “Measuring probes for KT 320 KISTOCK” and “Thermocouple probes” datasheets.
10
Technical features
All the probes for the KT 320 KISTOCK have the SMART PLUG technology. An automatic recognition and the adjustment make them 100% interchangeable.
Connect a probe:
➢ Open the mini-DIN connection cap on the bottom of the KISTOCK. ➢ Connect the probe in such a way the mark on the probe is in front of the user.
3.6 Dimensions (in mm)
3.6.1 Devices
3.6.2 Wall mount (in option)
3.7 Guarantee period
KISTOCK dataloggers have 1-year guarantee for any manufacturing defect (return to our After-sales service required).
Technical features
11
KT 320
KCC 320 / KPA 320
KP 320 / KP 321
KTT 320
Mark
4 Use of the device
4.1 Display
The selected values to display during the configuration with the KILOG software will scroll on the screen every 3 seconds.
The display can be activated or deactivated via the KILOG software.
At extreme temperatures, the display can become hardly readable and its display speed can slow down at temperatures below 0°C. This has no incidence on the measurement accuracy.
4.2 Function of LEDs
12
Use of the device
Alarm LED
If the red “Alarm” LED has been activated, it has 3 states:
- Always OFF: no setpoint alarms has been exceeded
- Flashing quickly (5 seconds): a threshold is currently
exceeded on one channel at least
- Flashing slowly (15 seconds): at least one threshold has been exceeded during the dataset
Operating LED
If the green “ON” LED has been activated, it flashes every 10 seconds during the recording period.
DATASET is finished.
END
Indicates that one value is being recorded. It flashes: the DATASET did not start already.
REC
Flashing slowly: DATASET is between 80 and 90% of the storage capacity. Flashing quickly: DATASET is between 90 and 100% of the storage capacity. Constant: storage capacity full.
FULL
The displayed values are the maximum/minimum values recorded for the channels displayed.
MIN
MAX
Indicates the alarm action type: rising or falling action.
Constant: indicates that the batteries have to be replaced.
BAT
ACT
Screen actualisation of measured values.
Indicates the channel number which is
measuring.
Temperature in °Celsius.
Temperature in °Fahrenheit .
1 2 3 4
Relative humidity
4.3 Function of keys
OK key: allows to start, stop the dataset or change of scrolling group like described in the following tables.
Selection key: allows the scroll values in the scrolling group like described in the following tables.
Device
state
Type of start/stop
selected
Key
used
Action
generated
Illustration
Waiting for
start
flashes
Start: by button
Stop: indifferent
Start of dataset
Inactive
Start: by PC, date/time
Stop: indifferent
Inactive
Start: indifferent
Stop: indifferent
Measurements scroll (group 1)*
Dataset in
progress
Start: indifferent
Stop: by button
Stop of the dataset
Start: indifferent
Stop: indifferent
Group change (groups 2 and
3)*
Use of the device
13
REC
During 5 seconds
During 5 seconds
5 seconds
5 seconds
* Please see the summary table of the groups organisation page 15.
Device
state
Type of start/stop
selected
Key
used
Action
generated
Illustration
Start: indifferent
Stop: indifferent
Group scrolling (groups 1, 2 and
3)*
Dataset finished
Indifferent Inactive
Indifferent
Measurements scroll*
* Please see the summary table of the groups organisation on the following page.
14
Use of the device
END
4.3.1 Groups organisation
The table below summarises the groups organisation and measured values available during a measurement dataset.
Group 1 Group 2 Group 3
Measured temperature*
Max. value in temperature Min. value in temperature
High alarm threshold in temperature Low alarm threshold in temperature
Measured hygrometry*
Max. value in hygrometry Min. value in hygrometry
High alarm threshold in hygrometry Low alarm threshold in hygrometry
Measured CO2*
Max. value in CO
2
Min. value in CO
2
High alarm threshold in CO
2
Low alarm threshold in CO
2
Measured differential pressure*
Max. value in differential pressure Min. value in differential pressure
High alarm threshold in differential pressure Low alarm threshold in differential pressure
Measured atmospheric pressure*
Max. value in atmospheric pressure Min. value in atmospheric pressure
High alarm threshold in atmospheric pressure Low alarm threshold in atmospheric pressure
Parameter 1 of probe 1*
Max. value in Parameter 1 of probe 1 Min. value in Parameter 1 of probe 1
High alarm threshold in Parameter 1 of probe 1 Low alarm threshold in Parameter 1 of probe 1
Parameter 2 of probe 1*
Max. value in Parameter 2 of probe 1 Min. value in Parameter 2 of probe 1
High alarm threshold in Parameter 2 of probe 1 Low alarm threshold in Parameter 2 of probe 1
Parameter 1 of probe 2*
Max. value in Parameter 1 of probe 2 Min. value in Parameter 1 of probe 2
High alarm threshold in Parameter 1 of probe 2 Low alarm threshold in Parameter 1 of probe 2
Parameter 2 of probe 2*
Max. value in Parameter 2 of probe 2 Min. value in Parameter 2 of probe 2
High alarm threshold in Parameter 2 of probe 2 Low alarm threshold in Parameter 2 of probe 2
Press key to change of group.
Press key to scroll values in the group.
4.3.2 Measurements scroll
According to the selected parameters during the configuration and according to the type of device, the measurement scroll is carried out like following:
Temperature* Hygrometry* CO2* Differential pressure* Atmospheric pressure* Parameter 1 probe 1* Parameter 2 probe 1* Parameter 1 probe 2* Parameter 2 probe 2*
* Parameters available according to the device and probe type
Use of the device
15
Examples:
• KT 320 KISTOCK with a thermo-hygrometric probe (channel 1) and a temperature probe (channel 2):
• KCC 320 KISTOCK:
The measurements scroll can be carried out by pressing the “Select” button of the datalogger or wait about 3 seconds and the display scrolls automatically.
4.4 PC communication
➢ Insert the CD-ROM in the reader and follow the installation procedure of the KILOG software.
1. Plug the male USB connector of the cable to an USB connection on your computer*.
2. Open the USB cap on the right side of the datalogger.
3. Connect the male micro-USB connector of the cable to the female micro-USB connector of the device.
4.5 Configuration, datalogger download and data processing with the KILOG software
Please see the KILOG software user manual: “KILOG-classes-50-120-220-320”.
The date and time updates automatically when a new configuration is loaded.
*The computer must be in compliance with the IEC60950 standard.
16
Use of the device
2
1
3
Or wait 3 seconds Or wait 3 seocnds
Or wait 3 seconds
Or wait 3 seconds
5 Bluetooth® function
Kistocks of the class 320 has the Bluetooth® function allowing to communicate with a smartphone or a tablet (Android or iOS) via the Kilog Mobile application. The Kistock is named “Kistock 320” in the list of available devices of the tablet or smartphone. By default, Bluetooth® is disabled on class 320 kistocks. Please see the Kilog software applications user manuals to enable it.
6 Maintenance
6.1 Replace the batteries
With a 3 to 7 years battery life*, the KISTOCK guarantees long-term measurement.
To replace batteries:
1. Unscrew the unlosable screw on the battery hatch on the backside of the KISTOCK with a cross-head screwdriver.
2. The battery hatch opens. Remove the old batteries.
3. Insert the new batteries and check the polarity.
4. Replace the battery hatch and screw it.
Only use trademark or high quality batteries in order to guarantee the announced autonomy.
After the battery replacement, the device must be reconfigured.
6.2 Device cleaning
Please avoid any aggressive solvent. Please protect the device and probes from any cleaning produce containing formalin, that may be used for cleaning rooms and ducts.
6.3 Safety lock wall mount with padlock
➢ Mount the safety lock support on the required place.
1. Present the KISTOCK datalogger on the support starting with the inferior part
2. Clip the KISTOCK on the support by falling back the superior part
3. Insert the padlock to ensure the safety lock function
➢ To remove the datalogger from the support, proceed on reverse order.
The padlock can be replaced by a fail-safe sealed
The datalogger can be placed on the screw-mount without the safety lock function
Maintenance
17
1 2 3
1 2
3
4
* On the basis of 1 measurement each 15 minutes at 25°C.
7 Calibration
A calibration certificate is available as option under paper format. We recommend to carry out a yearly checking.
7.1 KCC 320: perform a CO2 measurement verification
To avoid potential drifts, it is recommended to perform regularly a CO2 measurement verification.
➢ Before checking the CO2 measurement, verify the atmospheric pressure values measured by the device: launch a
dataset, or press the “Selection” button to scroll the measurements.
➢ If the atmospheric pressure values are not compliant, it is possible to carry out a measurement correction with the
KILOG software (please see the KILOG software user manual, “Measurement correction” chapter).
➢ Once the atmospheric pressure checked, verify the CO
2
measurement: launch a dataset , or press the “Selection” button to scroll the measurements.
➢ Connect a bottle of CO2 standard gas on the gas connection on
the back of the KCC 320 device with the supplied Tygon® tube.
➢ Generate a gas flow of 30 l/h. ➢ Wait for the measurement stabilisation (about 2 minutes). ➢ Check the CO2 values measured by the KCC 320. ➢ If these values are not compliant, it is possible to carry out a
measurement correction with the KILOG software (please see the KILOG software user manual, “Measurement correction” chapter).
7.2 KP 320 – KP 321: perform an auto-zero
It is possible to reset the device during a recording dataset:
➢ Unplug the pressure tubes of the device. ➢ Press the “Selection” button during 5 seconds to carry out the auto-zero.
The instrument resets. The screen displays “...”
➢ Plug the pressure tubes.
The device continues the measurements and the dataset recording.
It is possible to reset the device when values are measured but not recorded:
➢ Unplug the pressure tubes of the device. ➢ Press the “Selection” button to display the measurement.
➢ Press the “Selection” button during 5 seconds to carry out the auto-zero.
The instrument resets. The screen displays “...”
➢ Plug the pressure tubes.
The device continues the measurements.
18
Calibration
8 Accessories
Accessories References Illustrations
1 double AA lithium 3.6 V battery
2 batteries are required for class 320 dataloggers
KBL-AA
Safety lock wall mount with padlock
KAV-320
Wired extension for class 320 KISTOCK probes
In polyurethane, 5 m length with male and female mini-DIN connectors Note: several extensions can be wired in order to obtain up to 25 m cable length
KRB-320
Configuration and data processing software
KILOG software allows to configure, save and process your data in a very simple way.
Software only: KILOG-3-N
Complete set (software + 1
USB cable): KIC-3-N
Data collector
Collects up to 20 000 000 points from one or several KISTOCK directly on-site. Results restitution on PC of realised datasets
KNT-320
USB micro-USB cable which allows to plug your KISTOCK datalogger to your PC
CK-50
Neck size hand strap
KDC
Only the accessories supplied with the device must be used.
9 Troubleshooting
Problem Probable cause and possible solution
No value is displayed, only the icons are present.
The display is configured on “OFF”. Configure it on “ON” with the KILOG software (see page 16).
The display is completely off* and there is no communication with the computer.
The battery has to be replaced. (see page 17).
The display indicates “- - - -” instead of the measured value.
The probe is disconnected. Plug it again to the datalogger.
There is no Bluetooth communication with the datalogger.
The Bluetooth activation is on OFF. Reconfigure Bluetooth on ON with the KILOG software (see page 16).
* Only with the KT 320 and KTT 320 KISTOCK.
Troubleshooting
19
Once returned to KIMO, required waste collection will be assured in the respect of the environment in accordance to guidelines relating to WEEE.
BE CAREFUL! Material damages can happen, so please apply the precautionary measures indicated.
NTang – Class 320 Kistock – 19/11/18 – RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use