V VM4L LED fixtures are
designed for installations where moisture,
dirt, dust, corrosion and vibration may be
present, or NEMA 3 and 4X areas where
wind, water, snow or high ambients can be
expected. They can be used in locations
made hazardous by the presence of
flammable vapors or gases or combustible
dusts as defined by the NEC/CEC.
Typical applications include manufacturing
plants, food processing, certain chemical
and petrochemical processing facilities,
sewage treatment plants, off-shore and
dockside installations, garages and storage
facilities.
Compliances
• UL-8750 for LED lighting
• UL-844 Standard for lighting fixtures for
hazardous locations, Class I, Division 2;
Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric
luminairies for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X
• IP66 & Marine
Materials
• Ballast tank, splice box and cast guards
corrosion resistant copper-free aluminum
alloy
• Baked powder epoxy/polyester finish,
electrostatically applied for complete,
uniform corrosion protection
• All external hardware – stainless steel
• Reflectors – Polyester reinforced fiber
glass or aluminum
Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, IIB, IIA
LED
TECHNOLOGY
VM4LC with Flat Lens
LED Luminaire Features and
Standards
• Traditional Industrial Appearance,
Suitability, and Photometric Performance
• Wide variety of optics including globes,
globes with reflectors, all-glass refractors,
spin-top refractors and flat lens
• Swing-Barrel Nut patented tank mounting
system
• Optional Mounting arrangements
including Pendant, Wall, Ceiling,
Stanchion and others
• VM4L LED Housings can be retrofitted to
existing VM splice boxes; upgrade from
HID sources
• VM2Lx housing is 1.56” shallower for low
ceilings
• Crisp White Light for Excellent Color
Rendering – Chromaticity 5000 K (CCT
range); approx. 70 CRI
• Energy Savings – less than 130 Watts of
Power
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
NEMA 3, 4X
IP66
Marine Rated (US only)
Certified - File LR11713
IECE x Rated Models (V M4L with IEx suffix)
Ex nA IIC T4, Gc / E x tb IIIC T83ºC Db
Tamp -40ºC <Ta<+65ºC, IP66
IECE x Cer tificate QPS 15.0006
ATEX P ending
Contact Factory for other certication details
• Long Life – 50,000 - 55,000 maintenance
free hours to 70% initial lumens
• Ambient suitability -40°C to 55°C
• Instant On – Including after power
interruption
• World Voltage 120 – 277VAC 50/60Hz
• Solder-LESS LED Board Connections –
Vibration Resistant
• Ability for Dual Drivers – Redundant
Systems (built-in backup), or for
additional energy savings half of fixture
can be turned off
• LM80-08* Measurement of lumen
maintenance for LED light sources
(including TM-21)
• LM79-08* Certified “Absolute”
Photometry, including Chromaticity Color
for Solid State Lighting
• L70 Values – Industry Nomenclature for
Hours of use to 70% of Initial Lumens
• Two LED internal heat sink styles
» Bulb VM2LB/VM4LB
» Concave VM2LC/VM4LC
* LM-xx + TM-21 are Illumination Engineering Society standards designed to promote uniformity in testing
procedures among test labs and manufacturers. For more information go to ww w.ies.org
Swing-Barrel Nut(Patented)
1
Hang
Fixture
LED INTERNAL
Heat Sinks
Bulb style (VM4LB)
Maximum lumens but has
more glare at line-of-sight.
Concave style (VM4LC)
for a compact profile.
Recessed concave LED
array produces less glare.
Swing into Place
Consult website for
current list of approved
luminaires
32
Tighten
NEW!
NON-
GLASS
FOOD SUITABILITY
Non-Glass Polycarbonate
12” Flat Lens
Patented Design
Page 2
KILLARK LIGHTING
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
A
A
Z
Z
VM2&4LB, VM2&4LC SERIES
C
C
O
O
L
L
HIGH WATTAGE – CATALOG LOGIC
®
CertiLite®V LED Catalog Number Logic
VM2L or VM4LB13030 0000000
Housing Series
7-3/4” thread w/driver
and LED’s
B – Bulb heat sink
C – Concave heat sink
Lamp Wattage
Approx. VA (wattage) of driver & LED’s
040W LED VM2, VM4
050W LED VM2, VM4
055W LED VM2, VM4
065W LED VM2, VM4
070W LED VM4
080W LED VM4
090W LED VM4
100W LED VM4
105W LED VM4
130W LED VM4
Mounting Type
A – Pendant
X – Ceiling
B – Wall Bracket
C – Cone Top
E – EZ Mount Adapterl
D – Stanchion 25°
S – Stanchion Straight 90°
N – None (mount ordered separately)P
Killark high efficiency
LED Luminaries require
NO external heat sink
which adds weight and
collects dust and other
contaminates
Options/Accessories
F – Single FuseQ
FF – Double FuseQ
TBx – Terminal Blocks
IEX – IEC Ex includes TBL &
2SP – Second surge protector if
Guard
G
– Guard (Globes & Glass refractors)
N – No Guard
Optic
GL – Globe
R5 – Type V Refractor (all glass)
ER – Enclosed Refractor
EP – Polycarbonate Shielded Enclosed Reflector*
P5 – 12” Type V Polycarbonate Spin-Top*
S2 – Type II 12” Spin-Top Refractor
S5 – Type V 12” Spin-Top Refractor
PF – Spin-Top with flat poly lens (VM2LC and VM4LC only)
GF – Spin-Top with flat glass lens (VM2LC and VM4LC only)
M 40W, 5 0W, 55W, 65W, 70W single driver; 80W -130W dual drivers
N 80W-105W only (also 120-277VAC 50/60HZ)
O Completes as “EZ”, conduit mounting boxes ordered separately - See catalog grids.
P Completes as NN-Mount ordered separately.
Q Fusing not for Marine or Canadian installations.
R Photo cells for Class I, Div. 2 only.
S QD = Quick Disconnect. Allows easy tank removal for maintenance. Electrician
simply unplugs tank from mount for xture relocation or repair due to impact
damage.
T
Accessories - Shown for ordering convenience (shipped separately)
S VMPSD40 Fiberglass White Reector
A VMPA40 Fiberglass ANGLE White Reector
D HRD400 Deep White Reector
Z HRD400ALZ Deep Alzak Reector
U IEx option only available with VM4L and requires glass optics
1303/4”120-277VA C VM4LB13030A2GLG VM4LB13030A2R5GVM4LB13030A2S5GVM4LB13030A2P5G VM4LB13030A2ERN VM4LB13030A2EPN
GLOBE & GUARD
TYPE V GLASS
REFR ACTOR & GUARD
12” SPIN-TOP
TYPE V GLASS
REFR ACTOR & GUARD
12” SPIN-TOP TYPE V
POLYCARBONATE
REFR ACTOR & GUARD
ENCLOSED
REFLECTOR
POLYCARBONATE
FOOD OPTIC
VM4LC SERIES PENDANT WITH OPTIC AND GUARDM
WATTS
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530X2GLN.
N Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1”; e.g. VM4LB05530X3GLG.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
P 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PFN to GFN at end of catalog number.
1303/4”120-277VA C VM4LB13030X2GLG VM4LB13030X2R5G VM4LB13030X2S5GVM4LB13030X2P5G VM4LB13030X2ERN VM4LB13030X2EPN
GLOBE & GUARD
TYPE V GLASS
REFR ACTOR &
GUARD
12” SPIN-TOP
TYPE V GLASS
REFR ACTOR & GUARD
12” SPIN-TOP TYPE V
POLYCARBONATE
REFR ACTOR & GUARD
ENCLOSED
REFLECTOR
POLYCARBONATE
FOOD OPTIC
VM4LC SERIES CEILING WITH OPTIC AND GUARDM
WATTS
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530X2GLN.
N Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1”; e.g. VM4LB05530X3GLG.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
P 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PFN to GFN at end of catalog number.
1303/4”120-277VA C VM4LB13030B2GLG VM4LB13030B2R5G VM4LB13030B2S5GVM4LB13030B2P5G VM4LB13030B2ERN VM4LB13030B2GLG-A
GLOBE & GUARD
TYPE V GLASS
REFR ACTOR &
GUARD
12” SPIN-TOP
TYPE V GLASS
REFR ACTOR & GUARD
12” SPIN-TOP TYPE V
POLYCARBONATE
REFR ACTOR & GUARD
ENCLOSED
REFLECTOR
GLOBE, GUARD
& ANGLE
RELFECTORP
VM4LC SERIES WALL WITH OPTIC AND GUARDM
WATTS
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530B2GLN.
N Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1”; e.g. VM4LB05530B3GLG.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
P See logic for reector ordering options or order angle reector VMPA40 separately.
Q 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PFN to GFN at end of catalog number.
1303/4”120-277VA C VM4LB13030C2GLG VM4LB13030C2R5G VM4LB13030C2S5GVM4LB13030C2P5G VM4LB13030C2ERN VM4LB13030C2EPN
GLOBE & GUARD
TYPE V GLASS
REFR ACTOR &
GUARD
12” SPIN-TOP
TYPE V GLASS
REFR ACTOR & GUARD
12” SPIN-TOP TYPE V
POLYCARBONATE
REFR ACTOR & GUARD
ENCLOSED
REFLECTOR
POLYCARBONATE
FOOD OPTIC
VM4LC SERIES CONE WITH OPTIC AND GUARDM
WATTS
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530C2GLN.
N Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1”; e.g. VM4LB05530C3GLG.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
P 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PFN to GFN at end of catalog number.
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530D 5GLN.
N Catalog numbers shown are with 1-1/2” conduit openings; change “ 5” to “4” for 1-1/4”; e.g. VM4LB05530D4GLG.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
P See logic for reector ordering options or order angle reector VMPA40 separately.
Q 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PFN to GFN at end of catalog number.
VM4LC SERIES STRAIGHT STANCHION WITH OPTIC AND GUARDM
WATTS
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530S 5GLN.
N Catalog numbers shown are with 1-1/2” conduit openings; change “ 5” to “4” for 1-1/4”; e.g. VM4LB05530S4GLG.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
P See logic for reector ordering options or order dome reector VMPSD40 separately.
Q 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PRN to GFN at end of catalog number.
M Catalog numbers shown are with Guard (except ER/EP/PF); to omit guard change ending G to N; e.g. VM4LB05530EZGLN.
N VMEZA tank adapters UL “classi ed” as an assembly for use between VM tanks and EZ mounts. Order EZ mounts separately - see page L31 on components page.
O 120VAC through 277VAC 50/60Hz. See logic for other voltages.
Q 40W, 50W, 55W and 65W are available in VM2LB/VM2LC shallower housings. Substitute VM2L for VM4L in catalog number.
* For Glass 12” Spin-Top Flat Lens change PFN to GFN at end of catalog number.
* VMEZA is used between a ballast tank and an EZ mount - ordered separately. See catalog grids.
* * Furnished with non-metallic plugs. Also available: VMB10B wall 4xM25 hubs, and VMB810B 2xM20 side hubs
and 2xM25 top/bottom
VM2L/VM4L LED OPTICS AND ACCESSORIES
DESCRIPTIONOPTIC LOGIC
Flat Lens (gla ss spin top) “C” tank onlyVZRGF12 (GF)VZRF12GRD
Flat Lens (polycarbonate spin top) “C” tank only*VZRPF12 (PF)VZRF12GRD
Globe (glass)VMG25 (GL)VMAG25S
Refractor (all glass) Type VVMR255 (R5)VMAG25S
Enclosed ReflectorVMER40 (ER)VMERG
Enclosed Reflector with
Refractor (polycarbonate spin top) 12” Type V*VZRP175B (P5)VMRWGS
Refractor (glass spin top) 12” Type VVZRG4050 (S5)VMRWGS
* Non-glass over Food/Grain C lass II Div 1 Group G Certi ed; VMEP40, VZRP175B, and VZRPF12
polycarbonate Lens*
VMEP40 (EP)O
—
GUARDP
VMG25
VMER40
VMR255
VMR253
VMR251
VMERG
VMAG25S
VMAGBC
VMEP40
VM2L/VM4L LED REFLECTORS AND ACCESSORIES
DOME REFLEC TOR (Polyester reinforced fiberglass)VMPSD40
DEEP DOME REFL ECTOR (White Painted Aluminum)HRD400
DEEP DOME REFL ECTOR (Anodized Aluminum)HRD400ALZ
120VAC Photocell with FS Style CoverM
208-277VAC Photocell with FS S tyle CoverM
Bottom Closure for V MAG25SP
4-sided EXIT Accessory (use without guard)N
VMFSPC1
VMFSPC2
VMAGBC
VEXA400
M Order single -gang FS box separately. For photocell factory installed in tank, see logic.
N For use with Generator or UPS powered xtures
O For wall applications mount must be spaced out for bottom hub
P Guards are 316 Stainless Steel. Bottom closure for VMAG25S pt. no. VMAGBC
VZRG4050
VZRG4020
VMPSD40
Standard Dome, Fiberglass
White Reflector, Dia: 16”
VMRWGS
30O Angle, Fiberglass
White Reflector, Dia:16”
VZRPF/VZRGF
VMPA40
VMFSPC
VEXA400
Fixture not included
HRD400
Deep Aluminum, White
Reflector, Dia: 21”
HRD400ALZ
Deep Aluminum, Anodized
Reflector, Dia: 21”
Page 11
HIGH WATTAGE – COMPONENTS & RATINGS
“EZ” Mount Adapter
For easy fix ture relocation or to
repair fixture on ‘bench top’.
VMEZA adapter is used
between a ballas t tank and EZ
mount ordered separately.
Competitive Adapters
Designed to ease upgrading of other manufacturer’s
fixtures to KILLARK LEDs where removal of ex isting
mounting screws and conduit would be dif ficult and time
consuming.
Patented Design
KILLARK LIGHTING
VM2&4LB, VM2&4LC SERIES
Wall Bracket25° StanchionPendantCeiling
MOUNTING BOXES
CATALOG NUMBER
PENDANTCEILINGBRACKETSTANCHION
EZA2EZX2EZB3—3/4”
EZA3EZX3EZB3—1”
———EZD4A1-1/4” / 1/2”*
*1-1/2” furnished with 1-1/2”-1-1/4” reducer and extension.
Tank adapter to Crouse-Hinds®M VM Series mounts
Tank adapter to CH (70’s era wall mount with deep box)
Tank adapter to Appleton®N MERCMASTER II mounts
Tank adapter to Appleton® MERCMASTER III mounts
Tank adapter to Ha zlux®3O mounts
M Crouse-Hinds is a registered trademark of EATON® corporation.
N Appleton and MERCMASTER are registered trademarks of Emerson® Industrial Automation.
O Hazlux is a registered trademark of Thomas & Betts.
VMCHVM
VMCHVM-DEEP
VMM2LP
VMM3KP
VMHLDS
HUB SIZE
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
C
C
A
A
O
O
Z
Z
L
L
TOTAL LUMEN OUTPUT
WATTAGE
GLOBE
(VM4LB)
(VM4LC)
GLOBE
FLAT
LENS
(VM4LC)
4046004180387360100270000
5067156087555672600278000
5558425275479060100270000
6585778229744172600278000
7071116524598060100270000
8085257559692360100270000
901052 01021091157260 02780 00
10012201191010666 60100270000
105107809600880960100270000
13015630153701378 0 726002 7800 0
* Extra high lumen per watt LED’s
M Driver THD<20%, Powerfactor 99% @ 120V; Line
Regulation 2%; Load regulation 5%; Protected against
Over-voltage and Over-current.
Weights are shown with VM4LB with ceiling mount.
N
VM4LC with ceiling mount approx. 17.4 lbs.
For VM2L models, deduct approx. 1.25 lbs.
O TM-21 based values require very long duration
testing. The TM-21/L70 “official reported” value
is based on at least 10,00 0 hours testing (at time
of printing) at 1000mA to 1500mA drive current,
depending on LED chip utilized -”Reported L70”
is a factor of test duration. KIL LARK’s VM4LC/B
series utilizes lower 70 0mA maximum drive current –
“calculated” values by the major chip vendors utilized
predict L70 life up to 278,000 hours even at 1000mA .
For a given wattage current values are the same,
P
regardless of tank type VM2LB/C or VM4LB/C.
Q Replace (x) with tank size 2 or 4 and replace (y) with
heat sink style B or C.
TM-21
L70
CALCULATED
ORDERING INFORMATION AND AMBIENT SUITABILITYC1D2C2D1