Killark-Hubbell Electrical Products VM1L SERIES Catalog Page
REDUCED PROFILE – INTRODUCTION
LED
®
FEATURES-SPECIFICATIONS
Applications
CertiLite®V VM1L LED fixtures are designed for
installations where moisture, dirt, dust, corrosion
and vibration may be present, or NEMA 3 and 4X
areas where wind, water, snow or high ambients
can be expected. They can be used in locations
made hazardous by the presence of flammable
vapors or gases or combustible dusts as defined
by the NEC.
Typical applications include manufacturing
plants, and certain chemical and petrochemical
processing facilities, sewage treatment plants,
off-shore and dockside installations, garages and
storage facilities.
Compliances
• UL-8750 for LED lighting
• UL Marine type lighting fixtures (HID models)
UL-844 Standard for lighting fixtures for
hazardous locations, Class I, Division 2; Class
II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric luminaries
for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X
Materials
• Ballast tank, splice box and cast guards
corrosion resistant copper-free aluminum alloy
• Baked powder epoxy/polyester finish,
electrostatically applied for complete, uniform
corrosion protection
• All external hardware - stainless steel
• Reflectors - Polyester reinforced fiberglass
LED Luminaire Features and
Standards
• Reduced profile with Traditional Industrial
Appearance and Suitability
KILLARK LIGHTING
G
G
I
I
L
L
VM1L SERIES
H
H
A
A
Expanded wattage range
RANGE 40W, 45W, 50W
LED
Class I, Div. 2, Groups A,B,C,D
TECHNOLOGY
• Wide variety of optics including globes, globes
with reflectors, all-glass refractors, and spintop refractors
• Swing-Barrel Nut patented tank mounting
system
• Optional Mounting arrangements including
Pendant, Wall, Ceiling, Stanchion and others
• VM1L LED Housings can be retrofitted to
existing VM splice boxes; upgrade from HID
sources
• Energy Savings - less than 55 Watts of Power
• Long Life - 50,000 - 55,000 maintenance free
hours to 70% initial lumens
• Crisp White Light for Excellent Color
Rendering - Chromaticity 5000°K (CCT); 70
CRI
* LM-xx are Illumination Engineering Society Standards designed to promote uniformity in testing procedures among
test labs and manufacturers. For more information go to www.ies.org
Swing-Barrel Nut (Patented)
1
Hang
Fixture
2
NEW!
NON-
GLASS
FOOD
SUITABILITY
Polycarbonate 12”
Spin-top
Refractor VZRG2550
Class l, Zone 2, Groups llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
Marine Rated (US only)
NEMA 3, 4X
Certified - File LR11713
• Ambient suitability -40°C to 55°C
• Instant on - including after power interruption
• “World Voltage” 120-277VAC 50/60Hz
• Solder-LESS LED Board Connections –
Vibration Resistant
• Dual Drivers - Redundant Systems (built-in
backup), or for additional energy savings half
of VM1 L4530 can be turned off
• LM80-08* Measurement of lumen
maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry,
including Chromaticity Color for Solid State
Lighting
• L70 Values - Industry Nomenclature for Hours
of use to 70% of Initial Lumens
3
Swing into Place
Photo controls - Class
I Div. 2 / N4X areas
Available as Field or
Factory Installed to save
energy when light not
required.
Earthquake Tab -
Built-in attachment point
for safety cables.
Safety: Secures xture
to structure in case of
conduit failure.
Tighten
T
T
I
I
H
H
N
N
G
G
C
C
O
O
Z
Z
L
L
KILLARK LIGHTING
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
A
A
Z
Z
VM1L SERIES
C
C
O
O
L
L
REDUCED PROFILE – CATALOG LOGIC
®
CertiLite®V LED Catalog Number Logic
VM1L 45 30 0 0 00 0 00
Housing Series
5-1/2” thread w/driver
and LED’s
Lamp Wattage
40W – LED
45W – LED
50W – LED
Voltage
05 – 480VAC 50/60 Hzj
15 – 347VAC 50/60 Hzj
27 – 12-24VDC
30 – 120-277VAC 50/60 Hzk
34 – 120-250VDC
Mounting Type
A – Pendant
X – Ceiling
B – Wall Bracket
C – Cone Top
E – EZ Mount Adapterl
D – Stanchion 25°
S – Stanchion Straight 90°
N – None (mount ordered separately)m
Entr y (Mounts available)
2 – 3/4” NPT (A,B,C,X)
3 – 1” NPT (A,B,C,X)
4 – 1 1/4” NPT (D,S)
5 – 1 1/2” NPT (D,S)
6 – 3/4” NPT 5-Hub (X)
7 – 1” NPT 5-Hub (X)
8 – M20 4-Hub (X)
9 – M20 5-Hub (X)
Z – EZ Mount Adaptern
N – None (mount ordered separately)o
j Single step-down transformer feeds 2 drivers.
k Dual drivers 40W, 45W, & 50W.
l Completes as “EZ ”, conduit mounting boxes ordered seperately. - See page L31
m NN mount ordered seperately.
n Fusing not for Marine or Canadian installations.
o Photo cells for Class I, Div. 2 only.
p QD = Quick Disconnect. Allows easy tank removal for maintenance. Electrician simply unplugs tank from mount for
xture relocation or repair due to impact damage.
Options
F – Single Fusen
FF – Double Fusen
TBX – Terminal Blocks
X= Variations
(May be alphanumeric to
indicate terminals)
25P – Second surge protector
if controlling EA Driver
separately
P1 – Photocell 120Vo
Factory Installed
P2 – Photocell 208-277 Vo
Factory Installed
QD – QD Wired at Ballastp
CP – Component Pack
(Tank w/mount, optic, guard -
LED’s included in tank)
AN – Assembled
(Tank w/mount, optic, guard-
LED’s included in tank)
Guard
G – Guard
(Globes & Glass refractors)
N – No Guard
Optic
GL – Globe
R5 – Type V Refractor (all glass)
S8 – Type V 8” Spin-Top Refractor
S5 – Type V12” Spin-Top Refractor
P5 – Polycarbonate Type V 12” Spin-Top Refractor
Loading...