UGRP Panel Receptacles Ordering Information
2
UGRC Connector Ordering Information
1
Features
Connectors & Panel Receptacles
UGRC Series Connectors & UGRP Panel Mount Receptacles
UGRC connector fed from Acceptor
UGRP panel receptacle mounted in
explosion proof EXB enclosure.
The ACCEPTOR® UGP-QW “Quick Wiring” Plug
incorporates features found only on premium
devices. These include guides for easy conductor
insertion and the ability to tighten terminal
screws from the side with a full size screwdriver.
UGRC Connectors and UGRP Panel Receptacles complement
UGP/UGR Plugs and Receptacles, as well as Ground Fault
Protected UGFI and UGRGF Models.
Connectors, when used with Acceptor plugs, can extend the
reach for hazardous location rated portable equipment such as
hand lamps. Connectors eliminate the need for user created
corded box mounted receptacles.
Panel Receptacles with Acceptor Plugs provide local power
for hazardous location rated portable equipment. Units are
suitable for Class I Div.1 or Class I Div.2, depending on the
enclosure type used.
UGRC Connectors, UGRP Panel Mount Receptacles and UGPQW plugs are interchangeable and classified for use with
other NEMA bladed type explosion-proof and dust ignition
proof plugs, including Crouse-Hinds® Ark-Gard®2 and
Appleton® ULine®.
Industrial Applications
• Petroleum Refineries
• Chemical/Petrochemical Plants
• Oil Rigs & Platforms
• Waste Water Treatment
• Grain Processing
• Wet/Corrosive Environments
• Available with the exclusive Breech-Lock
Cap (see PR3 for more info) - patented
notch provides “3rd hand” plug operation
(holds lid open while one hand operates
plug, and other holds connector).
• Factory Sealed Construction
• UGRC suitable for 14 or 12 gauge SOOW
or similar cable
• Copper-free aluminum (less than 4/10 of
1%) alloy resists corrosion
• Electrostatically applied and baked pow-
der epoxy/polyester finish
• Dead Front Construction with integral
switch - requires Hazardous Rated NEMA
Bladed plug for operation
* UGRP Receptacles are available
“Factory Installed” in the following series:
Enclosures
- Series EXB, B7E
Distribution Equipment
-Series D2L, B7L Lighting Panelboards
* Contact factory for ordering information
NEMA CONFIGURATION
CATALOG NUMBER
WEATHER RATING
125V CONNECTOR CAP STYLE
250V CONNECTOR CAP STYLE
20 Amp
125 Volt
2 POLE
3 WIRE
20 Amp
250 Volt
2 POLE
3 WIRE
6-20R with T-slots
Breech-Lock with Notch
Flip Type
5-20R with T-slots
Breech-Lock with Notch
Flip Type
Killark 250V Plugs
20 Amp
15 Amp
Killark 125V Plugs
20 Amp
15 Amp
UGRC-20231B
UGRC-20231F
UGP-20231QW
UGP-15231QW
UGRC-20232B
UGRC-20232F
UGP-20232QW
UGP-15232QW
N4X*
N3**
N4X*
N3**
NEMA CONFIGURATION
CATALOG NUMBER
WEATHER RATING
125V PANEL RECEPTACLE CAP STYLE
250V PANEL RECEPTACLE CAP STYLE
20 Amp
125 Volt
2 POLE
3 WIRE
6-20R with T-slots
Breech-Lock with Notch
Flip Type
5-20R with T-slots
Breech-Lock with Notch
Flip Type
Killark 250V Plugs
20 Amp
15 Amp
Killark 125V Plugs
20 Amp
15 Amp
UGRP-20231B
UGRP-20231F
UGP-20231QW
UGP-15231QW
UGRP-20232B
UGRP-20232F
UGP-20232QW
UGP-15232QW
N4X*
N3**
N4X*
N3**
G_кЙЙЕЬ=Е~й=гзЗЙдл=kQu=пбнЬ= дбЗ=ЕдзлЙЗ=~еЗ=нмкеЙЗI=kP=tЬЙе=mдмЦ=белЙкнЙЗ=eбеЦЙ=rй
GGcдбй=iбЗ=гзЗЙдл=kP=пбнЬ=ЬбеЦЙ=бе=rm=йзлбнбзе=пбнЬ=зк=пбнЬзмн=йдмЦ
oЙйд~ЕЙгЙен=`~й=~еЗ=eбеЦЙ=hбнлW=_кЙЙЕЬ=hfqJNTP_I=cдбй=hfqJNTP
1`p^=ЕЙкнбСбЙЗ=Сзк=`~е~еЗ~=~еЗLзк=знЬЙк=амкблЗбнбзел=~ЕЕЙйнбеЦ=`p^K
2Å`p^
ìë=
`ЙкнбСбЙЗ=Сзк=rебнЙЗ=pн~нЙлI=`~е~З~I=~еЗ=знЬЙк=амкблЗбЕнбзел=~ЕЕЙйнбеЦ=нЬЙ=г~квK
20 Amp
250 Volt
2 POLE
3 WIRE
Class I, Div. 1 & 2, Groups B,C,D
Class I, Zones 1 & 2, Groups IIB+H
2
, IIA
Class II, Div. 1 & 2, Groups F,G
Class III
NEMA 3, 4X*
UGRC Series
UGRP Series
Certified File No. LR14667
1
Certified File No. LR14667
2
`=======rp
Typical CLI Div. I
application
Typical CLI Div. 2
application
Breech Caps
Flip Lids
“3rd Hand” Plug Operation
with Breech-Lock Lid.
Ark-Gard® is a registered trademark of
Crouse-Hinds®; U-Line® is a registered
trademark of Appleton Electric Company®
hfii^oh
®