Killark-Hubbell Electrical Products MBL Series, VM1L Series, EML Series Sales Brochure

hfii^oh

®

LED TECHNOLOGY
for Harsh & Hazardous
Environments

MBL Series

Compact Size

VM1L Series

Reduced Profile

EML Series

Explosion-Proof

HSI = GREEN

HUBBELL SUSTAINABILITY INITIATIVE

tÜ~íj~âÉëíÜáëmкзЗмЕнdobbk\

iba

qb`eklildv

fkabu

MBL Series - Compact Size 22 Watt & 45 Watt LED Luminaires

Introduction/Catalog Logic…………………………………………… 1
Ordering Information………………………………………………… 2

Components/Electrical Ratings/Temperature Data……...................……… 3

Dimensions/Photometrics………………………………………...…..4, 5

VM1L Series - Reduced Profile 45 Watt LED Luminaires

Introduction…………………………………………………....……. 6

Catalog Logic…………………………………………….......……… 7

Ordering Information………………………………………........…… 8, 9

Components/Electrical Ratings/Temperature Data……................………. 10

Dimensions/Photometrics……………………………...............……11, 12

EML Series - Explosion-Proof 45 Watt LED Luminaires

Introduction/Catalog Logic……………….............…………………… 13

Ordering Information…………………………………………….....… 14

Components/Electrical Ratings/Temperature Data…………...................… 15

Dimensions/Photometrics………………………………..........……16, 17

KILLARK®is pleased to announce the addition of LED labor
and energy saving technology to several of its time-tested
industrial grade luminaire series’ for harsh and hazardous
locations. Market demand for this long life clean white light
is growing significantly - Killark is there with products for
Class I Division 2; Class II Division 1, and Class I Division 1
“Explosion-Proof” applications. Killark also satisfies the need
for wet and corrosive locations with NEMA 4X ratings.

K

ey Features & Benefits:

• L70 55,000 hour life at 40O(5+ years to 70% of initial
output) equals Minimal Maintenance.

• LM79-08 Certified Photometrics Tested

• Solder-LESS LED Board Connections - Vibration Resistant

• Dual Drivers - Redundant Systems - VM1L, MBL4530 half
of fixture can be turned off for greater energy savings

• Less than 50 Watts of Power; 25 for MBL2230

• Instant on - including after power interruption

• “World Voltage” 120-277VAC 50/60Hz

• Crisp white light - 5000

O

K (CCT); 70 CRI

• Wide variety of optics, including Globes, Refractors
(MBL & VM1L), and Reflectors

• Optional Mounting arrangements, including Pendant, Wall,
Ceiling, Stanchion and others

• Copper-Free Aluminum Construction with electrostatically
applied epoxy/polyester power paint, plus Stainless Steel
External Hardware for Corrosion Resistance

`çãé~ÅípáòÉ

N

hfii^ohiba
j_ipЙкбЙл

j_i
fенкзЗмЕнбзе

cb^qrobpJpmb`fcf`^qflkp

Certified - File LR11713

Class I, Div. 2, Groups A,B,C,D
Class l, Zone 2, Groups llC,llB,llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
Suitable for wet locations
Marine
NEMA 3, 4X

Applications

CERTILITE

®

MBL LED fixtures are
designed for installations where mois­ture, dirt, dust, corrosion and vibration
may be present, or NEMA 3 and 4X
areas where wind, water, snow or high
ambients can be expected. They can
be used in locations made hazardous
by the presence of flammable vapors
or gases or combustible dusts as
defined by the NEC.

Typical applications include manufac­turing plants, and certain chemical and
petrochemical processing facilities,
sewage treatment plants, off-shore and
dockside installations, garages and
storage facilities.

Compliances

• UL-8750 for LED lighting

• UL Marine type lighting fixtures (HID

models) UL-844 Standard for lighting
fixtures for hazardous locations,
Class I, Division 2; Class II, Divisions
1 and 2; Class III

• CSA C22.2 no. 137-M1981 electric

luminaries for use in hazardous loca­tions

• Enclosed and gasketed

• NEMA 3, 4X

Materials

• Ballast tank, splice box and guards

(MBAG, VMAG) corrosion resistant
copper-free aluminum alloy

• Baked powder epoxy/polyester finish,

electrostatically applied for complete,
uniform corrosion protection

• All external hardware - stainless steel

• Reflectors - Polyester reinforced

fiberglass

LED Luminaire Features and Standards

• Compact in Size with Traditional Industrial

Appearance and Suitability

• Wide variety of optics including globes,

globes with reflectors, all-glass refractors,
and spin-top refractors

• Optional Mounting arrangements including

Pendant, Wall, Ceiling, and Stanchion

• MBL LED Housings can be retrofitted to

existing MB splice boxes; upgrade from
Fluorescent or HID

• Energy Savings - less than 50 Watts of

Power; 25 Watts for MBL2230

• Long Life - 50,000 - 60,000 maintenance

free hours to 70% initial lumens

• Crisp White Light for Excellent Color Render-

ing - Chromaticity 5000°K (CCT); 70 CRI

• Ambient suitability -40°C to 40°C (to

55°C for MBL2230)

• Instant on - including after power interruption

• “World Voltage” 120-277VAC 50/60Hz

• Solder-LESS LED Board Connections –

Vibration Resistant

• Dual Drivers - Redundant Systems (built-in

backup), or for additional energy savings
half of MBL4530 can be turned off

• LM80-08* Measurement of lumen mainte-

nance for LED light sources

• LM79-08* Certified "Absolute" Photometry,

including Chromaticity Color for Solid
State Lighting

• L70 Values - Industry Nomenclature for

Hours of use to 70% of Initial Lumens

`~í~äçÖkмгДЙкiçÖáÅ

Housing Series

LED Wattage

22 - 22 Watt
45 - 45 Watt

Guard
N — No Guard
G — Guard

MBL 45 30 A 2 R5 G

Mounting Style
A — Pendant
X — Ceiling
B — Wall
D — Stanchion 25

o

Entry
2 — 3/4” NPT (A, X, B)
3 — 1” NPT (A, X, B)
4 — 1-1/4” NPT (D only)
5 — 1-1/2” NPT (D only)
8 — M20 4 hub (X only)

iba

qЙЕЬездзЦу

iba

* LM-xx are Illumination Engineering Society Standards designed to promote uniformity in testing procedures
among test labs and manufacturers. For more information go to www.ies.org

Voltage

30 - 120-277VAC

Options

CP - Component Pack (housing, mount, optic, guard if

selected)

AN - Assembled Fixture (components as selected)
1Teflon® is a registered trademark of DuPont, Inc.

Optic
GL —Globe
R1 —Type 1 Glass Refractor
R5 —Type 5 Glass Refractor
S8 — 8” Spin-top Type V Refractor
S5 —12” Spin-top V Refractor
FG —Silicone Coated Globe
T1 —Teflon® 1 coated Type 1

Glass Refractor

T5 —Teflon® coated Type V

Glass Refractor

T8 —8” Teflon® Spin-top V Refractor
TV —12” Teflon® Spin-top V Refractor

C US

PENDANT

WALL

hfii^ohiba
j_ipЙкбЙл

`çãé~ÅípáòÉ

j_ilкЗЙкбеЦ
fеСзкг~нбзе

O

1 Catalog numbers shown are with Guard; to omit guard change ending G to N; e.g. MBL2230A2GLN

2 Catalog numbers shown are with 3/4” conduit openings; change “2” to “3” for 1” e.g. MBL2230A3GLG

3 120VAC through 277VAC 50/60Hz

4 Catalog numbers shown are with 1-1/4” conduit openings; change “4” to “5” for 1-1/2” e.g. MBL2230D5GLG

CEILING

STANCHION

loabofkd fkcloj^qflk

MBL SERIES PENDANT WITH OPTIC AND GUARD1

WATTS HUB SIZE2 VOLTAGE3 GLOBE & GUARD

TYPE I GLASS TYPE V GLASS 8” SPIN-TOP TYPE V 12” SPIN-TOP TYPE V

REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD

22 3/4” 120-277VAC MBL2230A2GLG MBL2230A2R1G MBL2230A2R5G MBL2230A2S8G MBL2230A2S5G

45 3/4” 120-277VAC MBL4530A2GLG MBL4530A2R1G MBL4530A2R5G MBL4530A2S8G MBL4530A2S5G

MBL SERIES CEILING WITH OPTIC AND GUARD1

WATTS HUB SIZE2 VOLTAGE3 GLOBE & GUARD

TYPE I GLASS TYPE V GLASS 8” SPIN-TOP TYPE V 12” SPIN-TOP TYPE V

REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD

22 3/4” 120-277VAC MBL2230X2GLG MBL2230X2R1G MBL2230X2R5G MBL2230X2S8G MBL2230X2S5G

45 3/4” 120-277VAC MBL4530X2GLG MBL4530X2R1G MBL4530X2R5G MBL4530X2S8G MBL4530X2S5G

MBL SERIES WALL WITH OPTIC AND GUARD1

WATTS HUB SIZE2 VOLTAGE3 GLOBE & GUARD

TYPE I GLASS TYPE V GLASS 8” SPIN-TOP TYPE V 12” SPIN-TOP TYPE V

REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD

22 3/4” 120-277VAC MBL2230B2GLG MBL2230B2R1G MBL2230B2R5G MBL2230B2S8G MBL2230B2S5G

45 3/4” 120-277VAC MBL4530B2GLG MBL4530B2R1G MBL4530B2R5G MBL4530B2S8G MBL4530B2S5G

MBL SERIES 25ççSTANCHION WITH OPTIC AND GUARD1

WATTS HUB SIZE4 VOLTAGE5 GLOBE & GUARD

TYPE I GLASS TYPE V GLASS 8” SPIN-TOP TYPE V 12” SPIN-TOP TYPE V

REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD REFRACTOR & GUARD

22 1-1/4” 120-277VAC MBL2230D4GLG MBL2230D4R1G MBL2230D4R5G MBL2230D4S8G MBL2230D4S5G

45 1-1/4” 120-277VAC MBL4530D4GLG MBL4530D4R1G MBL4530D4R5G MBL4530D4S8G MBL4530D4S5G

`çãé~ÅípáòÉ

P

hfii^ohiba
j_ipЙкбЙл

j_i
`згйзеЙенл

Wall

Pendant Ceiling

Stanchion

MBG

* MBX-8 furnished with 3 non-metallic plugs

HUB SIZE

3/4"

1"

M20

1-1/4"

1-1/2"

CATALOG NUMBER

PENDANT CEILING WALL STANCHION

MBA-2 MBX-2 MBB-2 —

MBA-3 MBX-3 MBB-3 —

— MBX-8* — —

— — — MBD-4

— — — MBD-5

MB MOUNTING BRACKETS

VMRWG85

VZRG1550

VZRG2550

VMAG17

VMR175
VMR171

VMRWGS5

VMPA-17

VMPSD-17

VMFSPC1

O
P
T

I
C
S

A
C
C

E
S
S
O
R

I

E
S

MBAG

DESCRIPTION OPTIC LOGIC GUARD

MBL LED OPTICS AND ACCESSORIES

Globe (glass)
Refractor (all glass) Type I
Refractor (all glass) Type V
Refractor (spin top) 8”Type V
Refractor (spin top) 12”Type V
Globe (Silicone coated)
Refractor Teflon® 1 coated (all glass) Type I
Refractor Teflon® coated (all glass) Type V
Refractor (spin top) 8”Type V
Refractor (spin top) 12”Type V
Reflector for MBG Globe - DOME 2
Reflector for MBG Globe - ANGLE 2
120VAC Photocell with FS Style Cover
208-277VAC Photocell with FS Style Cover
3-sided EXIT Accessory (use without guard)

MBG (GL)
VMR171 (R1)
VMR175 (R5)
VZRG1550 (S8)
VZRG2550 (S5)
MBGT (FG)
VMR171T (T1)
VMR175T (T5)
VZRG1550T (T8)
VZRG2550T (TV)
VMPSD-17
VMPA-17
VMFSPC1
VMFSPC2
VEXA100B

MBAG
VMAG17
VMAG17
VMRWG8
VMRWGS
MBAG
VMAG17
VMAG17
VMRWG8
VMRWGS
NA
NA
NA
NA
NA

1Teflon is a registered trademark of DuPont, Inc.
2Reflectors for use with MBG/MBAG only; VMG17 globe with VMAG17 guard will fit without reflector.

CAT. NO. VOLTAGE 50/60HZ WATTAGE AMPS 120/277 CIL3 WEIGHT

MBL LED HOUSINGS WITH DRIVERS AND LEDS - ELECTRICAL RATINGS

MBL2230 120-277VAC 25.8 .215/.093 1980 8 LBS

MBL4530 120-277VAC 49.9 .416/.180 3960 15.5 LBS

CAT. NO. AMBIENT C1D2 C2D1 L70 SUPPLY WIRE

THERMAL PERFORMANCE DATA (ANY OPTIC)

MBL2230 40OC T4A T4 (EFG) 60,000 HRS 75OC
MBL2230 55OC T4 T4(EFG) 50,000 HRS 90OC
MBL4530 40OC T4A T4(EFG) 55,000 HRS 90OC

3 CIL = Calculated Initial Lumens of LED component based on mfg. data and driver current INSIDE the optic. This value is provided as a reference only for compari-

son to traditional light sources such as incandescent, HID, or fluorescent which use initial values in “relative” photometry. KILLARK LED luminaires are tested using
the Absolute photometry method (LM79-08), which calculates delivered lumens only. KILLARK’s LED luminaires provide very bright white 5000

O

K (CCT) color and

can appear brighter than traditional light sources with higher lumen values under both photopic and scotopic conditions.

4 Driver THD < 20%, Powerfactor 99% @ 120V; Line Regulation 2%; Load regulation 5%; Protected against Over-voltage and Over-current.
5 VMRWG8 Plated Steel, VMRWGS 316 Stainless Steel.

VEXA100B

hfii^ohiba
j_ipЙкбЙл

`çãé~ÅípáòÉ

j_i
aбгЙелбзелL
mЬзнзгЙнкбЕл

Q

MBA Pendant

1.29

9.90

4.63

4.56

9.63

10.95

8.38

2.04

1.69

2.90

10.60

10.84

9.82

4.88

2.90

9.59

10.22

9.90

.89

1. 0 0

2.90

11.1 5

9.82

4.63

8.16 DIA.

1. 0 0

.94

.94

45

o

1.31

13.32

9.31

1.05

.94

MBX Ceiling

MBL Pendant, Globe, Guard

MBL & MBG Globe Only

MBL & 8” Type V Spin-top

MBB Wall Mount

LED 45 Watt Globe Only

1

1

22W model values approx. 50% of 45W

MBD Stanchion

MBL Pendant, Refractor, Guard

MBL & VMR Refractor

MBL & 12” Type V Spin-top

2.90

13.13

4.63

9.32

10.68

2.90

9.82

4.63

9.90

4.56

2.50

13.28

7.32

4.63

3.04

4.96

11.69

2.90

11.85

12.19 DIA.

5.31 DIA.

1.0 0

1.0 0

2.25

25

o

9.9