Killark-Hubbell Electrical Products LAL SERIES, LALxE SERIES, LALC SERIES Catalog Page

Download

Page 1

KILLARK LIGHTING

LAL/LALxE/LALC SERIES

LOW PROFILE LINEAR ALUMINUM LED • EXCLUSIVE DESIGN FEATURES

High temperature rated silicone gasketing provides NEMA 4X & IP66 sealing.

Looping Terminal Blocks under Wiring Access

Plate(s).

Diffused Clear

2 Lens Choices:

• Clear for maximum lumens

• Diffused for glare control

Optional Through Wiring

2 Access Plates for feed through wiring

End Caps include feet for direct ceiling mounting and safety

cable connection

Battery

E13 and E26 models include internal Emergency battery systems to 50°C suitability

Surge

Standard with internal 20kA/10kA Supplemental Surge Protection

Endcaps standard with 1 x 3/4” hub. 1/2” NPT and M20 available.

Shown with LAL- SB Height adjustable Swivel Brackets

Mounting Slots on back and at 45°

Earth

External Earth Ground for IECEx requirement

Page 2

Double Lens Model

FEATURES-SPECIFICATIONS

Applications

Linear LED Luminaires are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, and NEMA 3, 4X, IP66 areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of ﬂammable vapors or gases or combustible dusts as deﬁned by the NEC/CEC/IEC.

Typical applications include land based oil rigs, offshore oil platforms, dockside installations, chemical and petrochemical processing facilities, sewage treatment plants, garages, storage facilities, tunnels, and grain/food facilities.

ABS (American Bureau of Shipping) type approval for use on decks, vessels, platforms, barges, ships and boats. Also suitable for docks and marinas.

Compliances

• UL-8750 for LED lighting

• ANSI/UL 1598(A)

• UL-844 Standard for lighting ﬁxtures for

hazardous locations, Class I, Division 2; Class II, Divisions 1 and 2; Class III

• CSA C22.2 no. 137-M1981 electric

luminaires for use in hazardous locations

• IEC sufﬁx Zone 2/21 to IEC 60079-0,

60079-15, 60079-31 Standards

• Enclosed and gasketed

• NEMA 3, 4X

• IP66

Materials

• NEMA 4X & IP66 rated

• Housing – one piece natural ﬁnish < .001

copper-free aluminum extrusion

LINEAR LED TECHNOLOGY

LALC Compact

Single Lens Model

• Endcaps & wiring – Access covers are

copper-free (< .004) aluminum with gray baked powder epoxy-polyester ﬁnish, electrostatically applied for complete uniform corrosion resistance.

• External screws are 316 stainless steel

• Lens – Impact resistant polycarbonate

lens available in diffuse or clear

LAL & LALxE Product Features

• LALxE models have “built-in” battery

backup for 90 minute emergency exit

• Shallow design minimizes proﬁle in work

areas with low ceiling heights

• Diffuse Lens Standard to minimize glare;

Clear Lens available

• Polycarbonate Single Lens 18W to 60W;

Double Lens model 34W – 120W

• Slot Back Design allows multiple

mounting access points across length – slots can also be used with 5/16” or 8mm bolts & nuts, 3 housing slots, 1 center back and 2 at 45°.

• Variety of mounting options including

swivel brackets, wall, ceiling brackets, or beam clamps

• End Caps each have 2 mounting feet built-in

plus a safety strap attachment point

• Standard unit End Caps each have single

a ¾” NPT hub, and ﬁxture is furnished with one ¾” close-up plug and two ¾” to ½” reducers – provides out of the box ½” dead-end to ¾” feed-through ﬂexibility. Metric openings are available.

• Standard LALs have one wiring Access

Plate for easy access to driver leads.

• Supplemental 20KA/10KV Surge

Protection is standard (for AC models)

KILLARK LIGHTING

LAL/LALxE/LALC SERIES

Class I, Div. 2, Groups A, B, C, D Class l, Zone 2, Groups IIC, llB, llA Class II, Div. 1 & 2, Groups E, F, G AEx nAII, Ex nAII Wet Locations NEMA 4X IP66

Certified - File LR11713

IECEx Rated Zone 2 and Zone 21 areas Ex nA IIC T6 to T3, Gc Ex tb IIC T95°C Db Tamb -50°C < Tz < +65°C, IP6 6 IECEx Certiﬁcate QPS 15.0010

ATEX Certiﬁcate CML 15AT EX4081X (nA) & CML15ATEX3082X (tb)

NON-GLASS

GROUP G

FOOD SUITABILITY

LED Features and Standards

• Many Midpower LEDs blend light to

simulate ﬂuorescent tubes

• Crisp White Light for Excellent Color

Rendering – Chromaticity 5000K (CCT); approx. 70 CRI

• Energy Savings – High lumens per watt

• LED Array Life – to 212,000 maintenance

free hours to 70% initial lumens

• Ambient suitability -40°C to 65°C (see

tables). 50° Ambient limit for Emergency

models.

• Instant On – Including after power

interruption

• World Voltage 120 - 277VAC 50/60Hz

• Solder-LESS LED Board Connections –

Vibration Resistant

• LM80-08* Measurement of lumen

maintenance for LED light sources

• LM79-08* Certiﬁed “Absolute”

Photometry, including Chromaticity Color for Solid State Lighting

• L70 Values – Industry Nomenclature for

Hours of use to 70% of initial Lumens – TM-21* & Calculated

* LM-xx & TM-xx are Illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to www.ies.org

Page 3

KILLARK LIGHTING

LAL/LALxE/LALC SERIES

CATALOG LOGIC

LAL(C) – Series Constant

LAL(R) –

Aluminum Extrusion with Polycarbonate Lens

Rig Version with Poke out Hubs

Fixture Wattage 18 28 45

Single Lens – Dimension B or C (C required for E13 Emergency or for Non-emergency to match E13 length)

60 34 55 80

Two Lens – Dimension D for Non-emergency, or E13 or E26 Emergency)

120 C15 C20 C25 C30

Compact Lens – See Dimension

C35 C40 C45 C50

Emergency Battery Backup (LAL 120277VAC 50/60Hz only, not LALC Compact)

Blank –

No Emergency

E13 –

LAL 120-277VAC all Models; 18W, 28W, 45W,

60W use extended 4’ housing

E26 –

LAL 120-277VAC 34W, 55W, 80W, 120W

2-Lens models

LAL 45 E13 30 D L4-2AP FF

Lens D –

Diffuse Polycarbonate

C –

Clear Polycarbonate

Example = 45W 4PCB with 13W Emergency 120 - 277VAC

with Diffuse Lens, 2 Fuses, 2 Access Plates Dimension “B”

Options L4-2AP – LAL 18W, 28W, 45W, 60W with E13 Emer or

Non-Emer to match E13 length (Dimension B)

F –

Single Fuse (1 pole)

FF –

Two Fuses (2 pole - 2 hot legs)

S52 –

1 Endcap with 1x1/2” NPT and 1xM20

Entries (3/4” NPT Plugged)

D52 –

2 Endcaps with 1x1/2” NPT and 1xM20

Entries (3/4” NPT Plugged)

D50 –

2x1/2” NPT Entries 1 end cap, 3/4”

plugged; 2nd end cap std. 1x3/4” NPT

D502 –

2x1/2” Entries 2 end caps, 3/4” NPTs

plugged

D20 –

2xM20 Entries 1 end cap, 3/4” plugged;

2nd end cap std. 1x3/4”NPT

D202 –

2xM20 Entries 2 end caps, 3/4” NPTs

plugged

LSP –

Less Surge Protector

GH –

Gray Painted Housing

RH –

Red Painted Housing

2AP –

Dual Access Platesl

Specials – Contact Factory for custom congurations and options

Voltage 30 –

120V-277VAC 50/60Hz LAL/LALC all models

27 –

12VDC - 24VDC LALC 15W, 20W, 25W models only

33 –

347-480VAC LAL 28W & 55W non-emergency models only

34 –

125VDC-250VDC; 120-277VAC 50/60Hz LALC 15W, 18W, 20W, 23W, 25W

and LAL 28W, 60W, 55W, 120W non-emergency models

Energy Savings

LED VS FLUORESCENT WATTAGE & DELIVERED LUMENSjk

LED WATT LUMENS L/W FLUORESCENT LUMENS L/W

18W 2557 150 40W 1x40W BX 2471 63 28W 3775 144 55W 1x55W BX 3766 65 34W 5075 14 9 56W 2x28T5 4676 71 45W 5562 137 64W 2x32T8 4772 80 55W 7577 144 108W 2x54T5HO 8088 67 60W 76 18 132 120 W 2x60T12HO 6965 56 80W 11140 137 162 3x54T5HO 11619 65

j Cataloged Wattage in L Z2x Fluorescent or LALx LED

luminaires – actual varies with driver or ballast losses – Delivered Lumens and L/W from photometry testing

k LAL L70 Life 99,6 00 -212,00 0 hours

LZ2x Fluorescent 10,000-60,000 hours

LED array calculated L70 life depending on

ambient temperature. L70 values indicate 70% of initial illumination after “x” hours (see next page). Fluorescent typically operates to 20,000 hours (some wattages as few as 10,000 hours; specialty 32W lamps to 60,00 0 hours)

l 2AP Length Dimensions will increase by 4.2”.

Page 4

ORDERING INFORMATION AND AMBIENT SUITABILITY

WEIGHT

CATALOG NUMBER W/

DIFFUSE LENS j

LA L1830D

LA L18E1330D-L4-2AP LAL2830D LAL2830D-L4-2AP LAL28E1330D-L4-2AP LAL4530D LAL4530D-L4-2AP LAL45E1330D-L4-2AP LAL6030D

LAL60E1330D-L4-2AP LAL3430D

LAL34E2630D LAL5530D LAL55E1330D LAL55E2630D LAL8030D

LAL80E2630D LAL12030D

LA L120E2630D LALC15 27D LALC1530D LALC1534D LALC2027D

LALC2034D LALC2527D

LALC2534D LALC3030D 30 LALC3530D 35 LALC4030D 40 LALC4530D 45 LALC5030D 50

j See Logic Notes for Options k Shipping weights l See dimensional detail. m Standard Power Lumens

WATTS LBS./ KG k

POWER

17.9 / 8.1

21.9 / 9.9 C-51 (1295)

31.9 / 14.5 C-51 (1295)

17.9 / 8.1

21.9 / 9.9 C-51 (1295)

31.9 / 14.5 C-51 (1295)

17.9 / 8.1

21.9 / 9.9 C-51 (1295)

31.9 / 14.5 C-51 (1295)

18.9 / 8.6

22.9 / 10.4 C-51 (1295)

32.9 / 14.9 C-51 (1295)

34.5 / 15.6

44.5 / 20.2

54.5 / 24.7

34.5 / 15.6

44.5 / 20.2

54.5 / 24.7

34.5 / 15.6

44.5 / 20.2

54.5 / 24.7

36.5 / 16.6

46.5 / 21.1

56.5 / 25.6

12.03 / 4.49

STD.

120

LENGTH

B-32.6 (828)

D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471) D-57.9 (1471)

A-18.73 (476)

A-18.73 (476) A-18.73 (476) A-18.73 (476) A-18.73 (476) A-18.73 (476)

ORDERING INFORMATION

C1D2 ABCD/

ZONE 2 IIC, IIB,

IIAn

VOLTAGE

120-27 7 VAC

12-24 VD C 120-27 7 VAC 120-250VDC

120-27 7 VAC

Lumen s

AMPS q

0.15 - 0.06 2272 / 2479

0.23 - 0.10 3321 / 3624

0.38 - 0.16 5054 / 5515

0.50 - 0.22 7064 / 7709

0.28 - 0.12 4517 / 4929

0.46 - 0.20 6864 / 7490

0.67 - 0.29 10110 / 11032

1.00 - 0.43 15090 / 16467

0.15-0.06

0.17-0.08

0.18-0.08

0.26-0.11 2726 / 2974

0.30-0.13 3261 / 3558

0.34-0.15 4152 / 4530

0.38-0.17 5136 / 5604

0.42-0.18 6039 / 6590

Diffuse/

1.3-0.6 1503 / 1640

0.2-0.1

1.7-0.8 2337 / 2550

0.2-0.1

2.1-1.0 3019 / 3294

0.2-0.1

40C 55Cp65Cp40C 55C p65C p40C 55C p65C p40°C

Clear

T6 T6 T5 T4A T4A T4A T4A T4A T4A T6 T6 T5 T4 T4 T4LAL1830D-L4-2AP

T6 T6 T5 T4A T4A T4A T4A T4A T4A T6 T6 T5 T4 T4 T4

T6 T5 - T4A T4 A T4A T4A T4A T4A T6 T5 T5 T4 T4 T4

T6 T5 - T4A T4 A - T4A T4A - T6 T5 - T4 T4 -LAL6030D-L4-2AP

T6 T5 - T4A T4 A - T4A T4A - T6 T5 - T4 T4 -LAL34E1330D

T6 T5 - T4A T4 A - T4A T4A - T6 T5 - T4 T4 -

T6 T5 - T4A T4 A - T4A T4A - T6 T5 - T4 T4 -LAL80E1330D

T6 T5 - T4A T4 A - T4A T4A - T6 T5 - T4 T4 -LA L120E1330D

T5 T4A - T4A T4A T4 A T4A - T5 T4 - T4 T4 -

T5 T5 - T4A T4 A T4A T4 A - T5 T5 - T4 T4 -LALC2030D

T5 T4A - T4A T4A T4 A T4A - T5 T4 - T4 T4 -LALC2530D

T5 T4A - T4A T4A T4 A T4A - T5 T4 - T4 T4 T5 T4A - T4A T4A T4 A T4A - T5 T4 - T4 T4 T5 T5 - T4A T4 A T4A T4 A - T5 T5 - T4 T4 T5 T5 - T4A T4 A T4A T4 A - T5 T5 - T4 T4 T5 - - T4 A - - T4A - - T5 - - T4 - -

n Use 75°C Minimum Supply Wire @ 40 °C; Use 90°C Wire at 55° or 65°C o 55°C or 65°C where listed

p T-Codes for 55°C or 65°C reect maximum internal or external temperatures.

However, E13 or E26 Emergency units are limited to 50°C ambient to protect electronics and batteries.

C1D2n

GRPS. EFG

SIMULTANEOUS

KILLARK LIGHTING

LAL/LALxE/LALC SERIES

C2D1n

GRPS. EFG

IEC ZONE 2 IEC ZONE 21

55°C p65°C p40°C

55°C p65°C

LAL

LED LUMEN LIFE L70 CALCULATED L70 TM-21**

40°C Ambient 212,000 Hours to 70% Initial 60,600 Hours Ofﬁcial Reported

55°C/65°C Ambiento

** TM-21 based values require very long duration testing. IES TM-21 “official reported” is based on at least 10,000 hours of LED chip manufacturer’s LM-80 Testing at printing.

99,600 Hour s to 70% Initial 60,40 0 Hours Ofﬁcial Reported

LED LUMEN LIFE L70 CALCULATED L70 TM-21**

Extra High L/ W Models

High L /W Models 270,000 Hours to 70% Initial 60,100 Hours Ofﬁcial Repor ted

50W High L/ W Models

278,000 Hours to 70% Initial 72,600 Hours Ofﬁcial Repor ted

190,000 Hours to 70% Initial 60,300 Hours O fﬁcial Repor ted

LALC

Page 5

KILLARK LIGHTING

LAL/LALxE/LALC SERIES

DIMENSIONS AND ACCESSORIES

A: Dimensions for LALC

B: Dimension for Single Lens without Emergency Backup (17.9 lbs.)

3.92 [100]

C: Dimension Single Lens with Emergency Battery or Extended Model to Match Emergency Length

D: Dimension Double Lens with or without

T-SLOT FOR 5/16 DIA BOLT

5.76 [146]

2.88 [73]

TYP. (3) LOCATIONS

Emergency Battery

End Views

1.60 [41]

Page 6

KILLARK LIGHTING

4.50

1.80 [45.7]

.50 [12.7]

R.17 [4.3]

 .34

[8.7]

.75 [19.1]

1.25 [31.8]

2.31 [58.7]

1.80

[63.5]

1.80 [45.7]

.50 [12.7]

R.17 [4.3]

 .34

[8.7]

.75 [19.1]

1.25 [31.8]

2.31 [58.7]

2.50 [63.5]

LAL/LALxE/LALC SERIES

ACCESSORIES AND REPLACEMENT PARTS

ACCESSORIES AND REPLACEMENT PARTS: jk

LAL-SB

LZCB Ceiling Bracket Set with Stainless Steel Bolts to attach to L AL(C) “slots” LZWB Wall Bracket Set with St ainless Steel Bolts to attach to LAL(C) “slots” LAL-BC Steel/malleable Iron with Zinc electroplate for corrosion resistance; includes Stainless Steel Bolts to attach to LA L(C) “slots” LAL-EB Eyebolt Set with Stainless Steel Bolts to att ach to L AL(C) “slots” LAL-SSC 4’ Stainless Safety Cable Loop/ Loop Spring Safe ty Carabiner Hook LALG Stainless Guard for 1 L AL Lens, order two for 2 lens models LALCG LALC Stainless Guard LAL-LENSCLR Single Clear Lens with Gasket for LAL Series LAL-LENSDIF Single Diffuse Lens with Gasket for LAL Series LALC-LENSCLR Single Clear Lens with Gasket for LALC Series LALC-LENSDIF Single Diffuse Lens with Gasket for LALC Series LAL-RIG-CB Rig Mounting Style Ceiling Bracket LAL-RIG-WB Rig Mounting Style Wall Bracket

Swivel Bracket Set w/ Adjustable Height; includes 5/16” bol ts/nuts/lock-washer s for attachment to LAL(C) “slots; c an also be at tached to end cap mounting feet with FBO bolts.

[114.3]

1.25

4.00 [101.6]

[31.8]

2.31 [58.7]

LAL-SB on Center Slot L AL-SB on 45° Slot LAL-SB Dimensions – extended shown

[45.7]

R.17 .75 [19.1]

 .34

[8.7]

2.50

[4.3]

.50

[12.7]

l Un-extended height 3.25” (82.6)

.38 [9.5]

1.00 [25.4]

1.13 [28.6]

1.80 [45.7]

Ceiling Bracket Setk

Part Number LZCB

Stainless Steel (natural nish)

Wall Bracket Setk

Part Number LZWB

Stainless Steel (natural nish)

LAL-SSC

[23.8]

Attached to 1 of 3 End Cap

Attachment Positions

-18

LAL-SSC Safety Cable

j Dimensions in ( ) are millimeters. k Product accessories have hardware for at tachment to

xture; hardware to attach to wall/ceiling F.B.O.

[3 8 .1]

LAL-BC Beam Clamp

Killark-Hubbell Electrical Products LAL SERIES, LALxE SERIES, LALC SERIES Catalog Page

Specifications and Main Features

Frequently Asked Questions

User Manual