Killark-Hubbell Electrical Products KFL SERIES Catalog Page

C1D2 FLOOD – INTRODUCTION & LOGIC

LED

FEATURES-SPECIFICATIONS

Applications

LED Floods are designed for installations
where moisture, dirt, dust, corrosion and
vibration may be present, or NEMA 3 and
4X areas where wind, water, snow or high
ambients can be expected. They can be used
in locations made hazardous by the presence
of flammable vapors or gases or combustible
dusts as defined by the NEC.

Typical applications include manufacturing
plants, and certain chemical and
petrochemical processing facilities, sewage
treatment plants, off-shore and dockside
installations, garages and storage facilities.

Compliances

• UL-8750 for LED lighting

• ANSI/UL 1598(A)

• UL-844 Standard for lighting fixtures for

hazardous locations, Class I, Division 2;
Class II, Divisions 1 and 2; Class III

• CSA C22.2 no. 137-M1981 electric

luminairies for use in hazardous locations

• Enclosed and gasketed

• NEMA 3, 4X

• IP66

• IEX suffix Zone 2/21 to IEC 60079-0,

60079-15, 60079-31 Standards

Materials

• Body, end caps and lens frame corrosion

resistant copper-free aluminum alloy with
baked powder epoxy/polyester finish,
electrostatically applied for complete,
uniform corrosion protection

• All external hardware - stainless steel

• Thermal shock and impact resistant glass lens

• High temperature silicone gasketing

• Trunnion heavy gauge galvanized steel

with painted finish

LED Flood Features and Standards

• Crisp White Light for Excellent Color

Rendering - Chromaticity 5000K (CCT);
approx. 70 CRI

• Energy Savings - High lumens per watt

• Long Life - to 100,000+ maintenance free

hours to 70% initial lumens

• Ambient suitability -50°C to 55°C up to 125Wk

• Instant On - Including after power interruption

• World Voltage 120 - 277VAC 50/60Hz

• Solder-LESS LED Board Connections -

Vibration Resistant

• LM80-08* Measurement of lumen

maintenance for LED light sources

• LM79-08* Certified “Absolute” Photometry,

including Chromaticity Color for Solid State
Lighting

• L70 Values - Industry Nomenclature for

Hours of use to 70% of initial Lumens ­TM-21* & Calculated

Supplemental surge protection included as
standard for AC models only

Catalog Number Logic

KFL - Series Constant

Fixture Wattage
060

- 60W

070

- 70W

075

- 75W

085

- 85W

090

- 90W

105

- 105W

110

- 110W

125

- 125W

150

- 150W

165

- 165W

195

- 195W

Consult website
for current list of
approved luminaires

Voltage
30
33
34
Options

PL

F
FF
TBL
P1
P2
P3
QD
D20
D25
D75
SY
IEX

– 120 - 277VAC 50/60Hz
– 347 - 48 0VAC 60Hz (85W to 125W models)k
– 120 - 250VDC (85W to 125W models)

- Polycarbonate Lens

- Single Fusej

- Double Fusej

- Terminal Blocks

- 120V Photocell, factory installed

- 208V-277V Photocell, factory installed

- 347V Photocell, factory installed

- Quick Disconnect

- 2x M20 entries

- 2x M25 entries

- 2 x 3/4” NPT

- 316 SS Yoke

- IECEx & ATEX includes TBL and External Ground (to 125W)

KFL 125 30 XX

Looping

KILLARK LIGHTING

KFL SERIES

Class I, Div. 2, Groups A,B,C,D
Class II, Div. 1&2, Groups EFG
Class III
Suitable for wet locations
Marine Rated (US Only)
NEMA 3, 4X
IP66

File LR 11713

IEC Ex Rated model (w/IE X suffix)
Zone 2 and Zone 21 areas
Ex nA IIC T6…T3, Gc
Ex tb IIIC T160°C Db
Tamb -50°C <Ta<+55°C, IP66
IECE x Cer tificate CSA 14.000 2X
ATEX CML 14ATEX3087/4088

PATENTED
LUMINAIRE
DESIGN

KFL with KFS-6

Sliptter mount
on 2” pipe

Dark Sky Visor

KFL-DARK

* LM-xx & TM-xx are illumination Engineering Society

Standards designed to promote uniformity in testing
procedures among test labs and manufacturers.
For more information go to www.ies.org

IEX Units include Qty. 3 6mm terminals
plus external ground as standard

Construction Note:

Models with dual metric
entries are tapped with
one plugged and the
standard 3/4” NPT entry
will be plugged.

j Fusing not for Canadian or Marine

Installations

(Std. w/IEX)

k 347V-480V +40°C Max

H

H

T

T

I

I

H

H

N

N

G

G

G

G

I

I

L

L

C

C

A

A

O

O

Z

Z

L

L

KILLARK LIGHTING

T

T

I

I

H

H

N

N

G

G

G

G

I

I

L

L

H

H

A

A

Z

Z

KFL SERIES

C

C

O

O

L

L

C1D2 FLOOD – ORDERING INFORMATION & TECHNICAL DATA

ORDERING INFORMATION AND AMBIENT SUITABILITY

CATALOG

NO.j

KFL06030

WEIGHT
LBS./KG

WATTS VOLTAGE

60 120-27 7VAC 0.50-0.20 6 111 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-7 0 160-85 60100 270000

AMPS

jk

LUMENSl

C1D2m

40°C 55°C 40°C 55°C 40°C 55°C 40°C 55°C 40°C 55°C TM-21 CALCULATED

C1D2m

SIMULTANEOUS

C2D1m

KFL07030 70 120 -277VAC 0.60-0.30 9742 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-7 0 160-85 72600 278000
KFL07530 75 120 -277VAC 0.60-0.30 7454 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-7 0 160-85 60100 270000
KFL08530

120-27 7VAC 0.70-0.30

85

10840 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 72600 278000KFL08533 347-480VAC 0.24-0.17

KFL08534 120-250VDC 0.70-0.27
KFL09030

120-27 7VAC 0.80-0.40

90

9023 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 60100 270000KFL09033 347-480VAC 0.28-0.23

KFL09034 120-250VDC 0.80-0.36
KF L10 530

KFL10534 120-250VDC 0.90-0.36

30.00 /

13.61

KF L110 30
KFL11033 347-480VAC 0.31-0.23

120-27 7VAC 0.90-0.40

105

120-27 7VAC 0.90-0.40

110

1037 0 T4A T4A T3C T3C T3C (EFG) T3C (EFG) T4 T4 145-70 160-85 60100 270000KFL105 33 347-480VAC 0.31-0.23

1378 0 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 72600 278000

KF L110 34 120-250VDC 0.90-0.36
KF L12 530
KF L12 533 347-480VAC 0.35-0.29

120-27 7VAC 1.00- 0. 50

125

15340 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 72600 278000

KFL12534 120-250VDC 1.00-0.45
KF L15 030 150 120 -277 VAC 1.25-0.54 18550 T5 - T3C - T3C (EFG) - - - - - 60300 190000
KF L16 530 165 120 -277 VAC 1.38-0.60 19 22 0 T5 - T3C - T3C (EFG) - - - - - 72600 278000
KF L19 530 195 120 -277 VAC 1.63-0.70 2194 0 T5 - T3C - T3C (EFG) - - - - - 72600 278000

j Cat. nos. are 120-277VAC models, see logic for 347-480V.
k Amperage measured at 120VAC; 277VAC calculated
l Extra high Lumens per Watt LED models
m Use 75° minimum Supply Wire @40 °C Ambient; 90 @55°C Ambient
n First number is lens temperature under 25mm layer of dust; Second number is lens temp. for dust cloud.

IEC ZONE 2

m

IEC ZONE 21n

Dimensions

17.75

[450.9]

14.88

[377.8]

L70

KFS-6

Sliptter

KFCB

Cross Arm Mount

KFWB

Wall/Pipe Bracket

K4040

Wall Bracket

4041

Tenon Fitting

KFL MOUNTS AND ACCESSORIESj

CATALOG NUMBER DESCRIPTION

KFS-6 Steel Slipfitter for 2” Pipe (2-3/ 8” o.d.) Tenon. Slips 3.75” Over Pipe.
KFCB Heav y Dut y Cast-Iron Crossarm Fitting for Horizontal Trunnion
KFWB Heav y Dut y Wall Mount and/or Pipe Clamp Fit ting Clamps 2” Pipe (2-3/8” o.d.) Through

K4040 Heav y Dut y Steel Wall Bracket. (Must be with
4041 Heav y Dut y Steel Wall Bracket 2” Pipe (2-3/8” o.d.) Tenon Fitting. Uses with KFS-6.
KFLGo
VMSC10k
KFL-DARKlo
KFL-DOOR Replacement Door and Lens A ssembly (for units w/o internal reflectors)
KFL-DOOR2mn

j Fittings available to adapt trunnion mount  oodlights to crossarms, poles and walls. Must be ordered separately.
k Drop limit 1’. Attaches to luminaire cable provision and to mounting structure.
l Designed to eliminate uplight when aimed at 45°.
m Only for models factory supplied with internal reector.
n Not backward compatible with units originally shipped without internal reector.
o KFLG and KFL-DARK cannot be used together.

2-1/2” Pipe (2-7/8” o.d.)

KFCB

Crossarm Fitting).

Wire Guard, 316 Stainless Steel (not used with KFL-DARK)
10’ Stainless Steel Safety Cable with loop grip
Dark Sk y Visor, White Painted Aluminum (not used with KFLG)

Replacement Internal Reflector and Lens Assembl y

11.32

[287.6]

.531 DIA.

(13)

Trunnion Mounting

3-1/8”

(79)

Detail

Front

5.22

[132.7]

2.00

[50.8]

Side

8.41

[213.5]

14.07

[357.3]