C1D2 FLOOD – INTRODUCTION & LOGIC
FEATURES-SPECIFICATIONS
Applications
LED Portable Floods are designed for
temporary applications where moisture, dirt,
dust, corrosion and vibration may be present,
or NEMA 3 and 4X areas where wind, water,
snow or high ambients can be expected. They
can be used in locations made hazardous by
the presence of flammable vapors or gases or
combustible dusts as defined by the NEC.
Typical applications include manufacturing
plants, and certain chemical and petrochemical
processing facilities, sewage treatment plants,
off-shore and dockside installations, garages
and storage facilities.
Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598(A)
• UL-844 Standard for lighting fixtures for
hazardous locations, Class I, Division 2;
Class II, Divisions 1 and 2; Class III
• CSA C22.2 no. 137-M1981 electric
luminairies for use in hazardous locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66
• IEX suffix Zone 2/21 to IEC 60079-0, 60079-
15, 60079-31 Standards
Materials
• Body, end caps and lens frame and base
corrosion resistant copper-free aluminum
alloy with baked powder epoxy/polyester
finish, electrostatically applied for complete,
uniform corrosion protection
• All external hardware - stainless steel
• High temperature silicone gasketing
• Trunnion heavy gauge galvanized steel with
painted finish
• Stand and handle epoxy pound coat
• Polycarbonate Lens
• Stainless steel wire guard
LED Flood Features and Standards
• Crisp White Light for Excellent Color Rendering
- Chromaticity 5000K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - to 150,000 maintenance free
hours to 70% initial lumens
• Ambient suitability -50°C to 55°C up to 125Wk
• Instant On - Including after power interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections -
Vibration Resistant
• LM80-08* Measurement of lumen
maintenance for LED light sources
• LM79-08* Certified “Absolute” Photometry,
including Chromaticity Color for Solid State
Lighting
• L70 Values - Industry Nomenclature for
Hours of use to 70% of initial Lumens - TM21* & Calculated
Supplemental surge protection included as
standard for AC models only
Catalog Number Logic
KFLP - Series Constant
Fixture Wattage
060
070
075
085
090
105
110
125
150
165
195
- 60W
- 70W
- 75W
- 85W
- 90W
- 105W
- 110W
- 125W
- 150W
- 165W
- 195W
Voltage
30
– 120 - 277VAC 50/60Hz
33
– 347 - 48 0VAC 60Hz (85W to 125W models)k
Options
F
- Single Fusej
FF
- Double Fusej
IEX
- IECEx & ATEX includes TBL and
External Ground (to 125W)
j Fusing not for Canadian or Marine Installations
k 347V-480V +40°C Max
KFLP 125 30 XX XXXXX
KILLARK LIGHTING
KFLP SERIES
Class I, Div. 2, Groups A,B,C,D
Class II, Div. 1&2, Groups EFG
Class III
Suitable for wet locations
Marine Rated (US Only)
NEMA 3, 4X
IP66
File LR11713
IEC Ex Rated model (w/IEX suffix)
Zone 2 and Zone 21 areas
Ex nA IIC T6 to T3, Gc
Ex tb IIIC T160°C Db
Tamb -50°C <Ta<+ 55°C, IP66
IECEx Certificate
CSA 14.0002X
ATEX Certificate
CML 14ATEX3087/4088
PATENTED
LUMINAIRE
DESIGN
Available with
cord and plug
Strain Relief
Card Grip
* LM-xx & TM-xx are illumination Engineering Society
Standards designed to promote uniformity in testing
procedures among test labs and manufacturers.
For more information go to www.ies.org
Units include Qty. 3 6mm terminals plus
external ground as standard
Plugs
V
- VersaMate 30A
A
- Acceptor Quick
K
- KR Series Plug
VSI
N
- No Plug
Cord
Blank -
No Cord
25 -
25’
50 -
50’
Wire 15 amp
20 amp
- VersaMate
Non-Metallic
20 amp
H
H
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
C
C
A
A
O
O
Z
Z
L
L
KILLARK LIGHTING
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
A
A
Z
Z
KFLP SERIES
C
C
O
O
L
L
C1D2 FLOOD – ORDERING INFORMATION & TECHNICAL DATA
ORDERING INFORMATION AND AMBIENT SUITABILITY C1D2
CATALOG
KFLP06030
KFLP07030 70 120-277VAC 0.60-0.30 9 742 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145 -70 160-85 72600 278000
KFLP07530 75 120-277VAC 0.60-0.30 7454 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 60100 270000
KFLP08530
KFLP08533 347-480VAC 0.24-0.17
KFLP09030
KFLP09033 347-480VAC 0.28-0.23
KFLP10530
KFLP10533 347-480VAC 0.31-0.23
KFL P110 30
KFLP11033 347-480VAC 0.31-0.23
KFLP12530
KFLP12533 347-480VAC 0.35-0.29
KFLP15030 150 120-277VAC 1.25-0.54 18550 T5 - T3C - T3C (EFG) - - - - - 60300 190000
KFLP16530 165 120-277VAC 1.38-0.60 192 20 T5 - T3C - T3C (EFG) - - - - - 72600 278000
KFLP19530 195 120-277VAC 1.63-0.70 21940 T5 - T3C - T3C (EFG) - - - - - 72600 278000
j Cat. nos. are 120-277VAC models, see logic for 347-48 0V.
k Amperage measured at 120VAC; 277VAC calculated
l Extra high Lumens per Watt LED models
m Use 75° minimum Supply Wire @40 °C Ambient; 90 @55°C Ambient
n First number is lens temperature under 25mm layer of dust; Second number is lens temp. for dust cloud.
NO.
WEIGHT
WATTS VOLTAGE AMPS LUMENS 40°C 55°C 40°C 55°C 40°C 55°C 40°C 55°C 40°C 55°C TM-21 CALCULATED
LBS./KG
60 120-277VAC 0.50-0.20 6111 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 60100 270000
120-277VAC 0.70-0.30
33.00 /
14.97
85
120-277VAC 0.80-0.40
90
120-277VAC 0.90-0.40
105
120-277VAC 0.90-0.40
110
120-277VAC 1.00- 0.50
125
10840 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 72600 278000
9023 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 14 5-70 160-85 60 100 270000
1037 0 T4A T4A T3C T3C T3C (EFG) T3C (EFG) T4 T4 145-70 160-85 60100 270000
1378 0 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145-70 160-85 72600 278000
15340 T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T5 145 -70 160-85 72600 278000
C1D2
SIMULTANEOUS
C2D1 IEC ZONE 2 IEC ZONE 21 L70
KFLP ACCESSORIES
CATALOG NUMBER DESCRIPTION
KFLG Wire Guard, 316 Stainless Steel (not used with KFL-DARK)
KFL-DOOR-POLY Replacement Door and Lens Assembly (for units w/o internal reflectors)
VP3023 VersaMate Metallic 30 amp 3W4P Plug
UGP -15231QW Acceptor Quick Wire 15 amp NEMA 5-15P
KP-20ABC KR Series 20 amp Plug
VSI20P304 VersaMate Non-Metallic 20 amp 125v Plug
Dimensions