Killark-Hubbell Electrical Products EZ SERIES Catalog Page
KILLARK LIGHTING
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
A
A
Z
Z
C
C
O
O
L
L
EZ SERIES
MOGUL BASE HID FIXTURES
Class I, Div. 1 & 2 Groups C,D
Class l, Zone 1 & 2, Groups llB,llA
Class l, Zone 1, AEx d IIB
Class II, Div. 1 & 2, Groups E,F,G
Class III, Div. 1 & 2
Suitable for wet locations
Marine Rated (US Only)
NEMA 3, 4, 4X
Factory Sealed
- File E10514 and E91793
Certified - File LR11713
FEATURES-SPECIFICATIONS
HOSTILELITE® EZ fixtures are now available
with Pulse Start Metal Halide ballasts. Pulse
Start systems provide higher and better
maintained light output with longer life
compared standard metal halide systems.
Pulse start and standard Metal Halide lamps
and ballasts are not interchangeable.
Applications
HOSTILELITE® EZ Series mogul base
fixtures are designed for installations
where moisture, dirt, dust, corrosion and
vibration may be present, or NEMA 3 and
4x areas where wind, water, snow or high
ambients can be expected. They can be used
in locations made hazardous due to the
presence of flammable or explosive gases,
vapors and combustible dusts as defined by
the NEC.
Typical applications include classified
areas such as paint manufacturing plants,
ammunition facilities, oil and gas producing
and refining plants, off-shore and dockside
installations, tank farms, pipeline pumping
stations and marine loading and fuel transfer
terminals.
Features
• Three light sources – High Pressure
Sodium (50-400W), Metal Halide
(70-400W) and Pulse Start Metal Halide
(175 -400W )
• HOSTILELITE
®
EZ fixtures are now available
with Pulse Start Metal Halide ballasts
• Mounting choice –Pendant, ceiling,
25˚ stanchion or 90˚ wall mount, all
with “wireless” design that allows fast,
easy fixture installation or removal for
maintenance. See pages L181-182 for
trunnion mounted fixtures
• Factory sealed – No external seal needed.
Simply wire mounting cap and thread on
fixture to install
• Corrosion resistant – Copper-free
aluminum die cast construction. Baked
powder epoxy finish, electrostatically
applied. Exposed hardware is 316 grade
stainless steel
• Accessories – Available with or without
guard, standard dome or angle reflector
• Options – EZ Series fixtures can be
specified with instant restart for HPS
lamps, auxiliary quartz circuit, ballast
protector, and fuse kits. (See page L156
for details)
Catalog Number Logic
EZ 0 00 0 00 0 0 - 00 (CEN*)
Series Constant
Lamp Type
S—High Pressure Sodium
H—Metal Halide
P—Pulse Start Metal Halide
Lamp Wattage
05—50 Watt HPS
07—70 Watt HPS/MH
10—10 0 Watt HPS/MH
15—150 Watt HPS/MHP
17—175 Watt MH/M HPk
20—200 Watt HPS/MHP
25—250 Watt HPS/MH/MHPk
32—320 Watt MHP
35—350 Watt MHP
40—400 Watt HPS/MH/MHPk
V
Voltage
0—Quadri-Volt, 60 Hz. (120, 208, 240, 277)
5—480 Volts, 60 Hz.
6—TriTap Canada (120, 277, 347), 60 Hz.
7—220V, 60Hz
8—220/240 Volt, 50 Hz.
*CEN (CENELEC) Approved option available on some models.
See page L160 for more information.
j Two eyebolts plus 12” of connecting chain included.
k 175,250 and 400W MH EXPORT ONLY (EISA LAW).
l Not for use with DUAL-ARC-TUBE Lamps.
V
Consult factory for available lamp and voltage combinations.
Compliances
• UL-844 Electric Lighting Fixtures for use
in Hazardous Locations
• UL Marine Type Electric Lighting Fixtures
• UL-1598 Standard for HID Lighting Fixtures
• CSA C22.2 no. 137-M1981 Electric
Luminaires for use in Hazardous Locations
• CSA C22.2 no. 94-1976 Special
purpose enclosure
• NEMA 3, 4, 4x, 7CD, 9EFG
Options
Q— Auxiliary Quartz Standbyl
R— Instant Restrikel(150W
HPS Ma x)
BP—Ballast Protector
PS — Paint Spray
(50, 70, 100W HPS, 70,
100, MH)
EB—Eyeboltsj
SU103—Assembled w/Lamp
LS—Standard Lamp Supplied
LD— Dual Arc Tube
LampSupplied for 70, 100, 150
HPS only
Guard
G— Omit G if guard is not required
Reflector
S—VM Fiberglass Dome Reflector
A—VM Fiberglass Angle Reflector
D—Deep White Reflector
Z—Deep Alzak Reflector
Mounting Type
A2— 3/4” Pendant
A3—1” Pendant
X2—3/4” Ceiling
X3—1” Ceiling
B2—3/4” Bracket
B3—1” Bracket
D4 —1-1/4”/1-1/2” St anc hion
HIGH PRESSURE SODIUM 50-400W MOGUL BASE HID
FEATURES-SPECIFICATIONS
KILLARK LIGHTING
EZ SERIES
Class I, Div. 1 & 2 Groups C,D
Class l, Zone 1 & 2, Groups llB,llA
Class l, Zone 1, AEx d IIB
Class II, Div. 1 & 2, Groups E,F,G
Class III, Div. 1 & 2
Suitable for wet locations
Marine Rated (US Only)
NEMA 3, 4, 4X
Factory Sealed
- File E10514 and E91793 (Marine)
Certified - File LR11713
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
C
C
A
A
O
O
Z
Z
L
L
Pendant
Ceiling
Wall Stanchion
EZ 50- 400 WATT, HIGH PRESSURE SODIUM jm
WATTS
ANSI
LAMP
VOLTAGE @ 60HZ
PENDANT 3/4” k CEILING 3/4” k WALL 3/4” k STANCHION 1-1/4” l
120, 208, 240, 277 EZS050A2G EZS050X2G EZS050B2G EZS050D4G
50 S-68
120, 277, 347 — — — —
480 — — — —
120, 208, 240, 277 EZS070A2G EZS070X2G EZS070B2G EZS070D4G
70 S-62
120, 277, 347 EZS076A2G EZS076X2G EZS076B2G EZS076D4G
480 EZS075A2G EZS075X2G EZS075B2G EZS075D4G
120, 208, 240, 277 EZS100A2G EZS10 0X2G EZS100B2G EZS100D4G
100 S-54
120, 277, 347 EZS106A2G EZS106X2G EZS106B2G EZS106D4G
480 EZS105A2G EZS105X2G EZS105B2G EZS105D4G
120, 208, 240, 277 EZS150A2G EZS150X2G EZS150B2G EZS150D4G
150 S-55
120, 277, 347 EZS156A2G EZS156X2G EZS156B2G EZS156D4G
480 EZS155A2G EZS155X2G EZS155B2G EZS155D4G
120, 208, 240, 277 EZS250A2G EZS250X2G EZS250B2G EZS250D4G
250 S-50
120, 277, 347 EZS256A2G EZS256X2G EZS256B2G EZS256D4G
480 EZS255A2G EZS255X2G EZS255B2G EZS255D4G
120, 208, 240, 277 EZS400A2G EZS400X2G EZS400B2G EZS400D4G
400 S-51
120, 277, 347 EZS406A2G EZS406X2G EZS406B2G EZS406D4G
480 EZS405A2G EZS405X2G EZS405B2G EZS405D4G
j See Hazardous Location Application Data on pages L160 - L161 for specic suitabilities.
k For 1 inch pendant, ceiling and wall hubs, substitute “3” for “2” in catalog number; example: EZS070A3G.
l Stanchion conduit hub size supplied is 1-1/2” with 1-1/2” to 1-1/4” reducer for 1-1/4” mounting. (Refer to catalog logic).
m Luminaire catalog numbers include guards. To order luminaire without guard, omit last letter “G” from catalog number.
NOTE: Reectors must be ordered separately (see page L157).
All luminaires are designed for mounting with lamp in base up position.
CATALOG NUMBER
KILLARK LIGHTING
T
T
I
I
H
H
N
N
G
G
G
G
I
I
L
L
H
H
A
A
Z
Z
EZ SERIES
C
C
O
O
L
L
ORDERING INFORMATION
METAL HALIDE 70-400W MOGUL BASE HID
Class I, Div. 1 & 2 Groups C,D
Class l, Zone 1 & 2, Groups llB,llA
Class l, Zone 1, AEx d IIB
Class II, Div. 1 & 2, Groups E,F,G
Class III, Div. 1 & 2
Suitable for wet locations
Marine
NEMA 3, 4, 4X
Factory Sealed
- File E10514 and E91793 (Marine)
Certified - File LR11713
Pendant Ceiling Wall Stanchion
EZ 70 - 400 WATT, METAL HALIDE jmo
WATTS
ANSI
LAMP
VOLTAGE @ 60HZ
PENDANT 3/4” k CEILING 3/4” k WALL 3/4” k STANCHION 1-1/4” l
120, 208, 240, 277 EZH070A2G EZH070X2G EZH070B2G EZH070D4G
70 o M-98
12 0, 2 77, 3 47 EZH076A2G EZH076X2G EZH076B2G EZH076D4G
480 EZH075A2G EZH075X2G EZH075B2G EZH075D4G
120, 208, 240, 277 EZH100A2G EZH100X2G EZH100B2G EZH100D4G
100 o M-90
12 0, 2 77, 3 47 EZH106A 2G EZH106X2G EZH106B2G EZH106D4G
480 EZH105A2G EZH105X2G EZH105B2G EZH105D4G
120, 208, 240, 277 EZH170A2G EZH170X2G EZH170B2G EZH170D4G
175 o M-575 n
12 0, 2 77, 3 47 EZH176A 2G EZH176X2G EZH176B2G EZH176D4G
480 EZH175A2G EZH175X2G EZH175B2G EZH175D4G
120, 208, 240, 277 EZH250A2G EZH250X2G EZH250B2G EZH250D4G
250 o M-58
12 0, 2 77, 3 47 EZH256A2G EZH256X2G EZH256B2G EZH256D4G
480 EZH255A2G EZH255X2G EZH255B2G EZH255D4G
120, 208, 240, 277 EZH400A2G EZH400X2G EZH400B2G EZH400D4G
400 o M-59
12 0, 2 77, 3 47 EZH406A2G EZH406X2G EZH406B2G EZH406D4G
480 EZH405A2G EZH405X2G EZH405B2G EZH405D4G
j See Hazardous Location Application Data on pages L160 - L161 for specic suitabilities.
k For 1 inch pendant, ceiling and wall hubs, substitute “3” for “2” in catalog number; example: EZH070A3G.
l Stanchion conduit hub size supplied is 1-1/2” with 1-1/2” to 1-1/4” reducer for 1-1/4” mounting. (Refer to catalog logic).
m Luminaire catalog numbers include guards. To order luminaire without guard, omit last let ter “G” from catalog number.
n Will also operate 150W M107 Metal Halide Lamps.
o 175, 250, 400W MH EXPORT ONLY (EISA LAW).
NOTE: Reectors must be ordered separately (see page L157).
All luminaires are designed for mounting with lamp in base up position.
CATALOG NUMBER
Loading...