Kilews SKC-PTS-120, SKC-PTS-80, SKC-PTS-50 Operation And Maintenance Manual

Semi-Automatic Cordless Brushless

Power Torque Screwdrivers Series

OPERATION AND MAINTENANCE MANUAL

SKC-PTS-120
SKC-PTS-80
SKC-PTS-50

DIXON AUTOMATIC TOOL, INC.

http://www.dixonlighttools.com

Y2F103A-E-005



1

Before you use the Cordless Screwdriver for the first time, it is essential to
read and understand the manual completely. (Including the spare parts view)
The

term

“Cordless Screwdriver”

in

all

of

the

warning

listed

below

refers to

your main operated appliance.

Icon Instructions

1.

2.

3.

4.

5.

6.

7.

8.

9.

1. Read instruction manual. 6. Do not operate in an explo sive atmosphere.

2. Observe caution and safety notes. 7. Do not disassemble.

3. Recyclable. 8. Forbid to throw away.

4. For indoor use only. 9. CE certification.

5. Do not expose to w e t or rain conditions.

Accessories

Item Quantity Unit

Manual

1 PCS

Guarantee Card

1 PCS

Waist Hook 1 PCS

Screw M3*0.5P*10LT 1 PCS

Socket Extension 1 PCS

Bit 2 PCS



2

Warning

Read all instructions and make sure the appearance of the device has no damage before you use it.
Failure to follow all instructions listed below may result in electric shock fire and/or serious injury.

1. Keep the working area nice and clean.

1.1 Mess and dark areas may cause of accidents.

1.2 Keep the device away from rain or moisture to decrease the risk of electric shock or short-

circuiting occurred.

2. Be alert to workplace safety

2.1 Use the device under a well lit and clean environment.

2.2 Keep children and other people away unless the person has been assigned for the task to avoid

the danger of injury.

2.3 Do not play around while the tool is being used to avoid the danger of distractions.

2.4 Do not work with the device in potentially explosive environments in which there are

inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts
or fumes.

2.5 Do not use the device if you are tired or under the influence of drugs, alcohol or medication.

3. When the devices are not being used, store them in a safe place.

4. Use a suitable device for the job will be safer at work and have a better result.

5. Always use a screwdriver that is intended for the task you are undertaking. Do not overload or use

it improperly such as drilling or tapping.

6. Dress properly. Do not wear loose clothing or jewels while operating the tool to avoid the danger of

trapping.

7. By using the device correctly, make sure to hold it firmly with two hands in place before starting

the trigger.

8. When using the electrical power tool, take into account the auxiliary

handle or waist hook is

advantage of working conditions. On the contrary, the purposes of the waist hook or driver hook is
convenient to put the device away and easier to keep it out of reach of children.

9. Look after either the device or the battery carefully and have any damaged parts repaired by an

authorized or qualified shop. Always keep the tool nice and clean; pay attention on the machine
grease which might ruin the tool.

10. Disconnect the plug from the power source after the charger has been used.

11. Take apart the battery from the device when it is not being used.

12. Use only the accessories that are detailed in the operating instructions. The use of others which are

not recommended in the operating instructions may affect the functioning of the device. It could
lead to an increased risk of personal injury as well.

13. Remain alert at all times and watch what you are doing during proceeding. Before operation,

always check every part is in good condition and move freely in order to function properly.



3

14. This device only applies for metal screw bits designated with their dimensions and their shape. Do

not recommend to countersink or force of loading on any material such as plastic and wooden.

15. The device does not apply for elastic or tensile load with washer on.

16. To prevent parts in gearbox from damage, replace the grease at least once for every year.

17. It is necessary for the operators to read and follow up all the operating instructions in this manual.

KILEWS is not responsible for any personal injury that might cause of disobeying the safety
advices.

Function of Cordless Protection

▉Over electric current protection ▉Prevent from low power
▉Thermal Protector ▉Stall protection

▉Slow rotation protection ▉Reverse control protection
▉Battery Identification ▉Sleeping mode

Warning

Do not attempt to repair or disassemble this cordless screwdriver, the warranty will be

considered void.

1. This rechargeable screwdriver maintenance Make sure to remove the battery pack before

maintaining or repairing the device by a qualified technician.

2. Do not attempt to disassemble or reassemble the device at will which may result in poor

performance or danger of injury, the warranty applies only to initial package.

3. Do not repair the device with other than genuine KILEWS replacement parts may result in poor

performance or danger of injury, the warranty will be considered void.

4. The temperature between 0∘C ~35∘C would be an ideal condition of carrying out the tasks on the

device.

Operating Instructions

1. Charge the battery in the charging station before first use to make sure operates at its highest

capacity. To ensure operators against injuries, release the forward/reverse lever as arrow showing
below into a center position to have trigger locked before start or disassemble the device.

Forward / Reverse