Kikusui SC01-PFX Instruction Manual

Instruction manual

Interface Cable SC01-PFX

PART NO. Z1-006-910, IB033561

Jul. 2018

The SC01-PFX is a dedicated cable for use in connecting a Kikusui PFX2500 Series Charge / Discharge System Controller to a

CAUTION

Example of Connecting a PFX2512 to the PAT40-200T

–

–

+

PFX2512

PAT40-200T

Ferrite core

J1 connector

DC POWER SUPPLY connector

Operation manual

SC01-PFX [With core] (1 pc.)

Lock lever

To J1

Connector

for PAT-T

To DC POWER SUPPLY

for PFX2500 series

Hook

Attach the
lock lever

KIKUSUI ELECTRONICS CORP.

1-1-3 Higashiyamata, Tsuzuki-ku, Yokohama,
224-0023, Japan
Tel: [phone] Fax: [phone]

http://www.kikusui.co.jp/en

Website

The newest version of the operation manual can be downloaded
from Download service of Kikusui website.

© 2018

Kikusui PAT-T Series Regulated DC power supply. Because the cables that are necessary for making this connection are already
assembled, you can connect the system controller and the DUT easily and in a short amount of time.Before you use the product,

thoroughly read the “ Safety Symbols” and “ Safety Precautions” that are written in the PFX2500 Series Charge / Discharge
System Controller operation manual.

When shipped from the factory, a protective socket is attached to the J1 connector of the PAT-T series. Store this socket so that
you can reuse it when the cable is removed.

Checking the Package Contents

Length: Approx. 1 m

How to Use

Check that the POWER switch is turned off. Insert it securely using the lock lever and hook. Check that it does not fall out.

When removing a cable from a device, remove it while holding the connector’s lock lever or hook without
pulling on the cable.

Check that all parts are included and that they are not
damaged. If any of the parts are damaged or missing, contact
your Kikusui agent or distributor.

( This manual, 1 coopy)