Kikusui 149-30A Operation

Part No. Z1-109-920, IA001723

OPERATION MANUAL

High Voltage Digitalmeter

149-30A

Nov. 2005

Use of Operation Manual

• Please read through and understand this Operation Manual before operating the
product. After reading, always keep the manual nearby so that you may refer to it
as needed. When moving the product to another location, be sure to bring the
manual as well.

• If you find any incorrectly arranged or missing pages in this manual, they will be
replaced. If the manual gets lost or soiled, a new Operation Manual can be
purchased. In either case, please contact your Kikusui agent, and provide the
"Kikusui Part No." given on this page.

• This manual has been prepared with the utmost care; however, if you have any
questions, or note any errors or omissions, please contact your Kikusui agent.

All or any parts of this manual may not be reproduced in any forms, without

express written permission of Kikusui Electronics Corporation.

The contents of this manual, including the specifications of the instrument, are

subject to change without notice.

Copyright© 1994-2005 Kikusui Electronics Corporation.

Power Requirements of this Product

Power requirements of this product have been changed and the
relevant sections of the Operation Manual should be revised
accordingly. (Revision should be applied to items indicated by a
check mark ✓.)

Input voltage

The input voltage of this product is _______________ VAC,

and the voltage range is __________ to ___________ VAC.

Use the product within this range only.

Input fuse

The rating of this product's input fuse is

 A,  VAC,and  .

WARNING

・ Toavoidelectricalshock,alwaysdisconnecttheAC

powercordorturnofftheswitchontheswitchboard
beforeattemptingtocheckorreplacethefuse.

･ Useafuseelement having a shape,rating,and

characteristicssuitableforthisproduct.Theuseofa
fusewithadifferentratingoronethatshortcircuitsthe
fuseholder may resultinfire, electric shock,or
irreparabledamage.

149-30A 1

Power Requirements of this Product (cont'd)

AC power cord

The product is provided with AC power cords described below. If
the cord has no power plug, attach a power plug or crimp terminals
to the cord in accordance with the wire colors specified in the
drawing.

WARNING

・ Theattachmentofapowerplugorcrimpterminals

mustbecarriedoutbyqualifiedpersonnel.

Without a power plug Without a power plug

Blue (NEUTRAL )

Brown (LIVE)

Green/Yellow (GND)

Plugs for USA

White (NEUTRAL)

Black (LIVE)

Green or Green/Yellow (GND)

Plugs for Europe

Provided by Kikusui distributor/agent

Kikusui agents can provide you with suitable AC power cord.
For further information, contact Kikusui distributor/agent.

2 149-30A

Safety Precautions

The following safety precautions must be observed to avoid fire
hazard, electrical shock, accidents, and other failures. Keep
them in mind and make sure that all of them are observed
properly.

Users

Operation

Manual

• This product must be used only by qualified
personnel who understand the contents of this
operation manual.

• If it is handled by disqualified personnel,
personal injury may result. Be sure to handle it
under supervision of qualified personnel (those
who have electrical knowledge.)

• This product is not designed or manufactured for
general home or consumer use.

Purposes of use

• Do not use the product for purposes other than
those described in the operation manual.

Line
Voltage

• Use the product with the specified input power
voltage.

• For applying power, use the AC power cord
provided. Note that the provided power cord is
not use with some products that can switch
among different input power voltages or use 100
V and 200 V without switching between them. In
such a case, use an appropriate power cord.
For details, see the relevant page of this
operation manual.

Fuse

• With products with a fuse holder on the exterior
surface, the fuse can be replaced with a new one.
When replacing a fuse, use the one which has
appropriate shape, ratings, and specifications.

149-30A 3

Input power

Cover

• There are parts inside the product which may
cause physical hazards. Do not remove the
external cover.

GNL

Installation

• When installing products be sure to observe
"Precautions for Installation" described in this
manual.

• To avoid electrical shock, connect the protective
ground terminal to electrical ground (safety
ground).

• When applying power to the products from a
switchboard, be sure work is performed by a
qualified and licensed electrician or is conducted
under the direction of such a person.

• When installing products with casters, be sure to
lock the casters.

Relocation

• Turn off the power switch and then disconnect
all cables when relocating the product.

• Use two or more persons when relocating the
product which weights more than 20 kg. The
weight of the products can be found on the rear
panel of the product and/or in this operation
manual.

• Use extra precautions such as using more
people when relocating into or out of present
locations including inclines or steps. Also handle
carefully when relocating tall products as they
can fall over easily.

• Be sure the operation manual be included when
the product is relocated.

4 149-30A