2
Rectangular Tables with Benches
(UF12BE)
Rectangular Tables with Split Benches
(UF12SB)
Features
Solid core top • •
High-pressure laminate surface • •
Bullnose edge • •
73P edge • •
Perfect edge • •
27" height • •
29" height • •
Uniframe® Rectangular Tables with Seating
General Information
Bullnose Edge
SPECIFICATIONS
Lift Mechanism
Tables fold and open in one fluid motion,
assisted by a combination of pneumatic
cylinders and a torsional energy storage system. This combination ensures safety and
ease of use through a controlled, effortless
operation. Table stays in a teepee position
for easy handling. Torsion-bar-only assists
or spring assists are not to be used.
Tops and Benches
Table tops and benches are of solid core
warp-resistant construction. Center core is
5/8" thick 45# high-density particleboard. A
.040 high-pressure laminate face is used for
the top surface with a balanced high pressure laminate backer for the bottom surface.
Table tops and benches are attached to the
table frame with deep thread screws; expansion rivets are not to be used. Corners have
a 1-1/2" radius.
Benches
Bench supports are robotically welded steel
construction of 14-gauge tubular frame
steel with 6" square, heavy-duty 11-gauge
steel plates welded to uprights. Benches
are secured to steel plates with deep thread
screws. Each split bench requires two
plates. Full benches for 8' tables require two
plates; full benches for 10' and 12' tables
require three plates. No field assembly
required.
Stools
Stool supports are robotically welded steel
construction consisting of a 14-gauge
tubular frame with 6" square, heavy-duty
11-gauge steel plates welded to uprights.
Poly stools are attached to the steel plate
with deep thread screws. Thermoset hard
plastic stools are attached with carriage
bolts. No field assembly required.
Stools are one of the following:
A. Poly: High-impact polypropylene stools
of heavy-duty construction with ribs to rein-
force points of stress. Edges are rolled for
comfort and strength. Front is textured and
color permeates stool. White marks may
occur on the stool top at attachment points
but do not alter the structural integrity of the
table or stool. Stool is 13" diameter.
B. Thermoset Hard Plastic: Highly durable
thermoset hard plastic stool seats of molded
melamine and wood flour mixture are
available. Seats are scratch resistant with
color permeating through seat. Stool is 13"
diameter.
Edges
Table top and bench edges are finished in
one of the following:
A. Bullnose edge: (Flat vinyl T-edge) Edges
are banded with an abrasion-resistant vinyl
bullnose molding. The barbed "T" design
is inserted into a routed groove in the solid
particleboard top and held in place with nails
driven from the underside, spaced approximately 8-10" apart.
B. 73P Edge: Edges are banded with a 2mm
flat PVC (polyvinyl chloride) edge banding
that is chemically bonded to the table or
bench core.
C. Perfect Edge: Made of 1/4" thick by 3/4"
high cast black polyurethane. The Perfect
Edge is mechanically and chemically bonded
to the table core and chemically bonded to
the laminate surface edge, providing a superior, permanently sealed barrier to moisture,
dirt and bacteria penetration.
Frames
Table frames are fabricated using a
welded unitized construction, integrating all
structural steel members into a self-supporting unit. The table top support apron is
11-gauge channel steel, pierced to securely
anchor the tops. End leg and center leg
assemblies are robotically wire-welded.
Horizontal and vertical tubing is 1-1/4" o.d.
14-gauge steel. Hinge plates are 7-gauge
steel. Stretcher bars are 3/4" x 1-1/2"
14-gauge oval steel tubing. All legs operate
from the unitized frame, not the table top.
73P Edge
Perfect Edge
(Lifetime Top Warranty)
3
Uniframe® Rectangular Tables with Seating
General Information
Rectangular Tables with Stool Seats
(UF128)
Features
Solid core top •
High-pressure laminate surface •
Bullnose edge •
73P edge •
Perfect edge •
27" height •
29" height •
Frame Finish
Frame finish is one of the following:
A. Powder-Coated Finish: Epoxy powder
coating is electrostatically applied. The dry
coating is fused and cured in a baking oven
to form a smooth, continuous film. Finish
is chemical-resistant, hard, tough and chip/
mar-resistant. Standard finish is black.
B. Chrome Finish: Bright and semi-bright
duplex nickel chrome is applied to the frame
in a twenty-two step process, creating a
superior surface finish that is extremely
resistant to staining, scuffing, scratching
and corrosion.
Locks
Gravity lock constructed of 3/8" solid steel
rods engages automatically into slots in
apron hinge, eliminating the possibility of
folding unexpectedly. KI's exclusive storage lock is gravity operated for automatic
engagement and semi-concealed to prevent
accidental release. Release of gravity and
storage locks is possible from either side of
the table.
Glides
For increased surface area and durability,
non-marring 1.25" x 12" glides made of
nylon plastic material are standard. Set of
eight per table.
Casters
Large 4" diameter heavy-duty hard rubber
swivel casters provide easy and safe maneuverability. When the table is in use, casters
lift off the floor to prevent table from rolling.
To avoid tripping hazards, casters do not
extend beyond the outer edge of the table
top when in the open position. Tamperresistant caster covers are used to prevent
the trapping of dirt, dust or food. Casters
are self-lubricating.
General
Tables ship fully assembled. Tables are
listed to applicable UL standards and
INFORMATION
Warranty
Refer to KI Terms & Conditions document
or visit ki.com
requirements by Underwriters Laboratories,
Inc.
Loading...