Kieback&Peter FBR5 User Manual

Kieback&Peter GmbH & Co. KG Tempelhofer Weg 50, 12347 Berlin/Germany Telefon: +49 30 60095-0, Telefax: +49 30 60095-164 www.kieback-peter.de, info@kieback-peter.com
Datasheet 2.50-60.003-01-EN
FBR3
Issue 2016-01-05
Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения - A változtatások jogát fenntartjuk - ֱ⬭᳾㒣䗮ⶹ㗠ᬍࡼⱘᴗ࡯
Product Description
FBR3 Room Controller
Application
The FBR5 Rom Controller are used within the DDC3000 and DDC4000 automation systems for individual room control.
With 2 continuous output signals DC 0 V to 10 V for sequential control.
The fieldbus is used for data communication with the DDC3xxx/DDC4xxx controller.
DDC software menus, such as optimize/heating; limiting value and Y Set, can extend the basic closed loop control function.
Content Page
Important Information Regarding Product Safety ..................................................................................................2
Item........................................................................................................................................................................3
Technical Data.....................................................................................................................................................3
Accessories (not included in delivery) .................................................................................................................3
Dimensions..........................................................................................................................................................4
Connection...........................................................................................................................................................4
Mounting and Installation.......................................................................................................................................5
Setting the Fieldbus Address.................................................................................................................................6
self-control program...............................................................................................................................................6
Bridging program ...................................................................................................................................................6
Page 2 / 6
Product DescriptionFBR3
Datasheet 2.50-60.003-01-EN Issue 2016-01-05
Important Information Regarding Product Safety
Safety Instructions
This data sheet contains information on installing and commissioning the product "FBR3". Each person who carries out work on this product must have read and understood this data sheet. If you have any questions that are not resolved by this data sheet, you can obtain further information from the supplier or manufacturer.
If the product is not used in accordance with this data sheet, the protection provided will be impaired. Applicable regulations must be observed when installing and using the device. Within the EU, these
include regulations regarding occupational safety and accident prevention as well as those from the VDE (Association for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsibility of the system installer or operator to comply with local regulations.
Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians. Qualified technicians are persons who are familiar with the described product and who can assess given tasks and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of the appropriate regulations.
Legend
WARNING
Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided.
CAUTION
Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.
!
CAUTION
Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided.
NOTE
Indicates additional information that can simplify the work with the product for you.
Notes on Disposal
For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and must not be disposed of as household waste. Special treatment for specific components may be legally binding or ecologically sensible. The local and currently applicable legislation must be observed.
Loading...
+ 4 hidden pages