Kieback&Peter DDC111, DDC111-2 User Manual
Issue 2012-05-09
Datasheet 1.10-51.111-01-EN
Product Description
DDC111 and DDC111-2 room control modulel
Application
The room control modules are used together with the technolon® RCNxxx-L
or FBR110-L room controllers. A room control module can be connected to
each technolon® room controller.
DDC111-2 with LCD display for indication of room temperature and operating
buttons for manual setting of the room temperature setpoint and switching
between three fan levels.
The DDC111 room control module also has operating buttons for switching
between day, night and stand-by modes.
DDC111, DDC111-2
DDC111-2
DDC111
Content Page
Important Information Regarding Product Safety ..................................................................................................2
Item........................................................................................................................................................................3
Technical Data.....................................................................................................................................................3
Accessories (not included in delivery) .................................................................................................................3
Dimensions..........................................................................................................................................................4
Connection...........................................................................................................................................................4
Mounting ................................................................................................................................................................5
Operation ...............................................................................................................................................................6
DDC111-2 Operation ...........................................................................................................................................6
DDC111 Operation ..............................................................................................................................................7
Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen
voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения
A változtatások jogát fenntartjuk -
Kieback&Peter GmbH & Co. KG
Tempelhofer Weg 50, 12347 Berlin/Germany
Telefon: +49 30 60095-0, Telefax: +49 30 60095-164
www.kieback-peter.de, info@kieback-peter.com
保留未经通知而改动的权力
A
-
Datasheet 1.10-51.111-01-EN Issue 2012-05-09
Product DescriptionDDC111, DDC111-2
Important Information Regarding Product Safety
Safety Instructions
This data sheet contains information on installing and commissioning the product "DDC111,
DDC111-2". Each person who carries out work on this product must have read and understood this
data sheet. If you have any questions that are not resolved by this data sheet, you can obtain further
information from the supplier or manufacturer.
If the product is not used in accordance with this data sheet, the protection provided will be impaired.
Applicable regulations must be observed when installing and using the device. Within the EU, these
include regulations regarding occupational safety and accident prevention as well as those from the
VDE (Association for Electrical, Electronic & Information Technologies). If the device is used in other
countries, it is the responsibility of the system installer or operator to comply with local regulations.
Mounting, installation and commissioning work on the devices may only be carried out by qualified
technicians. Qualified technicians are persons who are familiar with the described product and who
can assess given tasks and recognize possible dangers due to technical training, knowledge and
experience as well as knowledge of the appropriate regulations.
Legend
WARNING
Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided.
!
CAUTION
Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.
NOTICE
Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not
avoided.
NOTE
Indicates additional information that can simplify the work with the product for you.
Notes on Disposal
For disposal, the product is considered waste from electrical and electronic equipment (electronic
waste) and must not be disposed of as household waste. Special treatment for specific components
may be legally binding or ecologically sensible. The local and currently applicable legislation must be
observed.
A
Page 2 / 8
Issue 2012-05-09
Datasheet 1.10-51.111-01-EN
DDC111, DDC111-2Product Description
Item
DDC111-2 Room control module with LCD display for indication of room temperature, allows manual set-
ting of the room temperature setpoint and switching between three fan levels.
DDC111 Room control module with LCD display for indication of room temperature, allows manual set-
ting of the room temperature setpoint, switching between day, night and stand-by modes, and
switching between three fan levels.
Technical Data
Measured variable Room temperature of spaces in homes or commercial premises
Measuring system Integrated digital room sensor
Measuring range 0 °С to 45 °C
Connection RJ socket
Display LCD display:
■ Room temperature actual value 0.0 °C to 45.0 °C, in steps of 0.1 K
■ Room temperature setpoint, in steps of 0.1 K
■ Symbol display to indicate operating mode
■ Fan levels
DDC111-2 operating buttons button: Switches to temperature mode for setting the room temperature
setpoint
button: Switches to fan mode for setting the fan level
button: Sets the room temperature setpoint or allows manual setting of
the fan level
DDC111 operating buttons button: Switches to day mode
button: Switches to night mode or to stand-by mode
button: Switches to temperature mode for setting the room temperature
setpoint
button: Switches to fan mode for setting the fan level
button: Sets the room temperature setpoint or allows manual setting of
the fan level
Housing Plastic housing, color RAL9010 (pure white), other colors available on request
Degree of protection IP30
Ambient temperature 0 °C to 45 °C
Ambient humidity Non-condensing
Installation Flush-mounted box
Dimensions WxHxD: 82.5 x 82.5 x 30.0 mm
Weight 110 g
Accessories (not included in delivery)
Z178 Connection line: room control module <> room controller (RJ plug on both sides, 10 m)
Z178/2 Adapter: RJ plug - terminal block, 4-pole (15 cm)
Page 3 / 8
A
Loading...