KIDZTECH TOYS 8447019 24GTX User Manual
Pack
Contents
-
USB Cable Adaptor x1
150mAh
For Vehicle
(Included)
Battery Installation
)
Disconnect the rechargeable battery pack from the USB Cable
Adapter.
Transmitter
Vehicle
Signal Match
Steering
Charging plug
NO.: 84470
1:12
SCALE
FULL
FUNCTION
RACING BIKE
-RC Vehicle (Vehicle) x 1
-RC Transmitter (Transmitter) x 1
-Instruction Manual x 1
1. The 3.7V rechargeable battery pack must be charged before use by utilizing the USB
Cable Adaptor which included.
2. Do not overcharge the battery pack. Do not charge for more than 4 hours.
3. Do not charge the battery pack if it shows leakage, corrosion, or has loose or exposed
wires or other damage.
4. Do not cover the battery pack with any sort of materials while charging.
5. Do not touch the battery pack when it is hot. Wait until the battery pack cools before
installing it in the Vehicle and before recharging.
6. Do not dispose of the battery in fire.
7. Do not dismantle the battery or charger, and do not cut the battery or charger cables.
8. The battery pack will be warm after charging, and hot after use in a vehicle.
9. The supply terminals are not to be short-circuited.
10. Rechargeable batteries are only to be charged by adults.
11. Battery replacement must be only made by adults.
12. The USB Cable Adaptor is not a toy.
13. Charge only type (150mAh Max.) rechargeable battery packs. Other types of
batteries may burst causing injury to persons and damage. This power unit is
1
5
RC Transmitter x 1
PRO . S Y S TE M
3.7V
ADAPTOR
Rechargeable
Battery
RC Vehicle x 1 USB Cable Adaptor
intended to be correctly orientated in a vertical or floor mount position. This
USB Cable Adaptor is intended to be used for charging 3.7V rechargeable
battery pack with capacity 150mAh Max. It cannot be used for charging
non-rechargeable batteries. Regular examination of USB Cable Adaptor for
any damage to their cord, plug, enclosure and other parts, and that, in the
event of such damage, it must not be used with the charger or battery pack
charge until such damage has been repaired. Note that the AAA battery is
non-rechargeable and is not to be recharged. Only batteries of the same or
equivalent type as recommended are to be used. It will need replacement
when transmission is poor.
14. Exhausted batteries are to be removed from the product.
15. Non-rechargeable batteries are not to be recharged.
16. Diuerent types of batteries or new and used batteries are not to be mixed.
17. Rechargeable batteries are to be removed from the toy before being charged.
18. Batteries are to be inserted with the correct polarity.
19. The packaging has to be kept since it contains important information.
3.7V
ages
6
Rechargea ble Batte ry Must Be
Recycled O r Dispo sed Of Pr operly.
3.7V Lithium
For Transmitter (Fig. 1 and Fig. 2)
1. Unscrew the screw on the battery cover
2. Open the battery cover
3. Install 2 new 1.5V “AAA” batteries with correct polarities (+/as shown inside the battery compartment
4. Close the battery cover
5. Tighten the screw on the battery cover
2.4 GHz
Button
Accelerator
Trigger
Wheel
Connect the 3.7V rechargeable battery pack to the USB Cable Adaptor.
The charging time for a full charge is about 1 hour. Full charge battery usage Max. 30 mins.
How To Bind
4.
Play on smooth surface to have the optimum
performance
2. Use the Steering Wheel to control the Vehicle turning left or right
Turn
Left Turn
Right
ON/OFF
Backward
Stop
Forward
3. Use the Accelerator Trigger to drive the Vehicle Forward, Stop and Backward
84470
1. Turn on the Vehicle.
2. Hold the Signal Match Button for around 4 second then the Transmitter signal light will flash for 6-7 second.
3. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing.
4. If it cannot complete within 8 seconds, please turn off the Vehicle and re-start the binding process.
5. When the binding process is done, whenever switching the Vehicle on and off, it searches for the code that it memorized, and will only lock on to the
Transmitter signal containing that code.
6. Please turn off the Vehicle and re-start all binding process if changing to another 2.4GHz Transmitter for playing.
How To Play
1. Switch ON the Vehicle
Vehicle
5. Remember to switch OFF the power of the Vehicle after
playing
6. The optimum control range is up to 15m outdoor
Performance Tips
1. Do not drive on grass, dirt, sand, dusts, carpet or go through water.
2. Do not drive in windy or rainy weather.
3. Avoid direct impact the Vehicle with obstacles.
4. Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter
due to leakage of electrolyte from batteries.
5. Remove all batteries from the Vehicle and Transmitter when not in use for long period.
6. Keep fingers, hair and loose clothing away from wheels.
7. The operating range can be affected by a variety of factors
a) Low Voltage of batteries in Transmitter or Vehicle
b) Interference from other items that emit radio frequency signals.
8. Outdoor usage is recommended in order to get optimum control range.
9. Recommend to play the vehicle on a clean and smooth surface.
10. Clean the battery compartment to make sure it is free from dust to prevent poor
contact of batteries
FCC label compliance statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS-210 Compliance Statement:
This device complies contains licence-exempt transmitter that comply with Innovation Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Declaration of Conformity
The product is in conformity with the requirement of EU Directive 2014/53/EU.
Environmental notes:
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important
contribution to environmental protection.
Please ask at your local community for the correct collection point.
Disposal of batteries
Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return
batteries containing harmful substances and all other used batteries. You can hand in your old batteries
at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing
harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
Frequency band: 2410-2475 MHz
Maximum radio frequency
power transmitted: <0dBm
KIDZTECH TOYS MANUFACTURING LTD.
Room 802, 8/F., Inter-Continental Plaza, 94
Granville Road, TST East, Hong Kong. Tel: (852)
27218868 info@kidztech.net
Made in China http://www.kidztech.net
KT-20190312(EN)
Loading...